$89.00
Part # NEP2133
PureLine® 6-Way Multiport Valve – For NE6150 / NE6170 Filters
Aftermarket Replacement | Top Mount | 1.5" Ports
✅ Features & Benefits
✅ High-quality PureLine® aftermarket replacement valve
✅ Designed for use with NE6150 & NE6170 sand filters
✅ Provides 6 standard functions: Filter, Backwash, Rinse, Waste, Recirculate, Closed
✅ 1.5" plumbing connections for straightforward compatibility
✅ Durable, weather-resistant construction for long service life
✅ Simple installation – direct replacement for worn or damaged valves
➡️ Restore Reliable Filter Performance
➡️ The PureLine® 6-Way Valve restores proper operation to NE6150 and NE6170 filters, giving pool owners reliable, leak-free performance.
⚠️ Tech Tips & Cautions
⚠️ Verify filter model (NE6150 / NE6170) before purchase
⚠️ Always shut off pump and release pressure before moving valve handle
⚠️ Replace spider gasket or O-rings if leaks occur at handle positions
⚠️ Hand-tighten unions to avoid cracking
I have a 22" sand filter from namco from the early 2000"s, will this fit?
Reply
Hi Steve, If you can provide us with the model of the Namco filter that you have, we can verify if this valve will work.
Reply
I just need a replacement spider gasket for the 6 way valve. Can I order an individual gasket without ordering the entire valve?
Reply
Hi Eric, Replacement part are not available for the NE6170 Filter 6 Way Valve.
Reply
Will you please provide a picture of the complete decal for the 6 way valve for NE6170 filter so I can see how to mark mine, since replacement parts are no longer available?
Thank you!
Reply
Hi Evelise, Here is the Valve Decal for the NE6170 Filter
Reply
I recently bought a used above ground pool with this blue wave system. In order to move it I had to take all the silica sand out of the filter, how much sand has to go back in? It's a 18"-22" system
Reply
Hi Anthony, A general rule of thumb is to fill the filter tank up no less than 1/2 full with sand but not more than 3/4 full.
Reply
Less than 1 hr
Screwdriver
Less than 1 hr
Screwdriver, Pliers
2 1
First I removed the hoses.then i removed the ring seal.pulled out the valve.removed the pressure gauge . Put the new valve on.put the ring seal on.put the hoses back on installed the pressure gauge into hole.done turned it on Wa la done.works perfectly.
The Most Recent Reviews
(4 out of 5 stars) Recommend
Reviewed By: Inyo Customer ()
I do like this product it was an easy install. I gave it four stars instead of 5 because I would like it to come with further instructions on each valve.
Was this review helpful to you?
(5 out of 5 stars) Replacement 6 way valve
Reviewed By: Sherrie W. ()
Fit and works perfectly
Was this review helpful to you?