Model # NY565
Manufacturer Code P17005DE
Pool Care water balance chemicals
The first, most important step to proper pool care is to keep your pool water in balance. This will ensure that you are getting the most effective use of your chemicals. Test daily to ensure that pH, total alkalinity, calcium hardness and cyanuric acid (stabilizer) are within the correct levels.
| Stabilizer (Cyanuric Acid) | |
Stabilizer keeps chlorine in your swimming pool longer, prolonging the life of chlorine. Pool Solutions Stabilizer helps reduce the loss of chlorine due to direct sunlight by as much as 25%.
*Packaging may vary from image* |
|
| Desired CYA increase | Amount of Stabilizer needed to increase Cyanuric Acid Pool volume in gallons |
||||||
| 1,000 | 5,000 | 10,000 | 15,000 | 20,000 | 25,000 | 50,000 | |
| 10 ppm | 1 1/4 oz. | 6 1/2 oz. | 12 3/4 oz. | 1 1/4 lbs. | 1 2/3 lbs. | 2 lbs. | 4 lbs. |
| 20 ppm | 2 1/2 oz. | 12 3/4 oz. | 1 3/4 lbs. | 2 1/2 lbs. | 3 1/3 lbs. | 4 lbs. | 8 1/3 lbs. |
| 30 ppm | 2 1/2 oz. | 11 oz. | 1 1/3 lbs. | 2 lbs. | 2 2/3 lbs. | 3 1/3 lbs. | 12 1/2 lbs. |
| 40 ppm | 3 oz. | 10 oz. | 1 1/4 lbs. | 2 lbs. | 2 1/2 lbs. | 3 1/4 lbs. | 16 2/3 lbs. |
| 50 ppm | 6 1/2 oz. | 2 lbs. | 5 1/4 lbs. | 6 1/4 lbs. | 8 1/3 lbs. | 10 1/2 lbs. | 21 lbs. |
*Product should be added to a bucket of water and mixed. Once product has begun to pre-dissolve, slowly pour it along the perimeter of the swimming pool. The filter and pump should be running anytime chemicals are added to the swimming pool.
Following chemical treatment, how long do I have to wait before I use my pool?
Reply
With the exception of superchlorinating (which requires waiting until the chlorine level drops to recommended levels), you can generally use your pool when the chemical is dispersed throughout the pool. Fifteen minutes to one hour is a good rule of thumb.
Reply
How do I add this stabilizer to my pool?
Reply
One of the most efficient ways to add this chemical to your pool is by first shutting off the pool pump, removing the pump basket, putting the pump lid back on, turning the pump back on, then lastly slowly adding the stabilizer into the skimmer. This will allow the stabilizer to be caught by the filter slowly dissolving it as water passes through it over the next 48 hrs. Be sure to put the pump basket back once you have added all the stabilizer needed.
Reply
