Part # 35-430-1064
Manufacturer Code 1212235
Dimensions 4" L x 4" W x 3.75" D
Due to the length of the shaft on the impeller it may be necessary to remove the water slinger on the motor or shorten the shaft of the impeller in order for the wetend and motor to fit properly together.
I am rebuilding a ULTIMAX-56 with a 2.5 HP 2 speed 8.8/3.0 amp A.O Smith Motor and wet end pump what impeller do in need
Reply
Hi Mike, Base off of the info provided you will need the Ultimax Impeller,2.0HP(Green,Brown,Red)-(1212230), but the only way to be certain is provide the p/n or colors directly off of the impeller.
Reply
Ultimax Sta-Rite Industries Model 1016174 Ser. # 34412365
Is this the correct impeller? If not,which impeller and seal are the correct replacements?
Reply
Hello Charles. The Sta-Rite Vico Ultimax Spa Pump model 1016174 is specified as a 4.0 CHP Spa Pump. The correct impeller would be part #1212008. Ultimax Impeller, 4.0 HP This can be verified by examining the colored strips located on the impeller shaft. The 4.0 HP impeller is sequenced Green, Orange, Red, Brown. (see part picture) Verification can be obtained by examining the HP rating of the current motor. The volute o-ring and motor shaft seal should be replaced concurrent with the new motor. Volute O-ring Ultimax Pump Shaft Seal Attached please find an exploded parts diagram. Vico Ultimax Spa Pump
Reply
