Part # NA704
Dimensions 6-3/4" L x 5" W x 5" D
POOL & SPA REPLACEMENT LIGHT BULBS
Specially designed to keep your pool well lit this season. Our bulbs are made with thicker filaments and glass to last longer. Heavy duty heat shielding prevents damaging heat build-up and prolongs the bulb's life.
* Dimensions may vary slightly
POOL & SPA LIGHT LENS GASKETS
Remember when replacing your pool or spa light bulb it is very important to replace the lights lens gasket. After long use, heat, and harsh chemicals, the old gasket is probably compressed, and if it doesn't fail immediately, it might fail before the next bulb change. Click here for Pool Light Lens Gaskets
For additional pool & spa light bulbs
I have an American products underwater light(wet niche type) model is R-400 BCL. the gasket I see on your site is 791016. the bulb is an R 40 reflector bulb p/n 993650, not sure which bulb that is you have listed. other #'s on the light are 98708400 & L 777985. thank you for your help.
Reply
Hello, Steve. The part number for R-400 BCL cross-references to the Pentair Amerlite Pool Light and the part number 98708400 cross-references to the American Products - SpaBrite & Aqualight. I best recommend verifying the voltage and watts on your current bulb or the casing of the fixture. You may find this link helpful as well. Click here to view How To Identify a Replacement Pool Bulb / Light.
Reply
I need to replace a light bulb in a 15 year old pool light. No label left on the light fixture.
American Products Co is embossed on the approx. 8" diameter glass lens. The niche is part # 792067 (Pentair?).
Circuit is 120V.
Must the new bulb be exactly the same watts as the old one or could I just use a 400W bulb?
I assume the gasket is the 8 1/2 inch version such as LPL-G-P or 3525-07?
I love the details you give on your website! Thanks!
Reply
Hello Fred, from what the niche light it connects too there is only American Products - SpaBrite & Aqualight Parts that you can use which depending on volts/watts would work in your light.
Reply
I need a new pool light. I removed the blub. On the inside the label reads 400 watts 120 volts R-40 bulb type. It also reads model 7884XX, 7844XX, 7894XX... could you please tell me which blub and casket I need
Reply
Is this bulb the correct one for this housing. I don’t see you have a 300w version?
-120-VOLT-NA704.jpeg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-120-VOLT-NA704.jpeg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "400W Flood Light Bulb, 120V, 6.75\" x 5.0\" Diameter, R-40, Hayward, Pentair Lights - NA704")
Hi, Garett. It is NOT, the correct bulb is P/N Q300T3C/120 along with the Amerlite Lens Gasket - O-170.
Reply
That shows a non screw type bulb my fixture takes a bulb that screws in..
-120-VOLT-NA704.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-120-VOLT-NA704.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "400W Flood Light Bulb, 120V, 6.75\" x 5.0\" Diameter, R-40, Hayward, Pentair Lights - NA704")
Garett, The fixture label has T3 R7S as the bulb type, this 400W, 120V, R40 bulb can be used with your fixture.
Reply
Less than 1 hr
Screwdriver
1 0
To replace light bulb in pool light: I shut off the power at the circuit breaker. Removed the one screw holding the light in place and attached to the side of pool. I then proceeded to take the light completely out of the pool.
Removed all the screws holding the light cover in place. Removed the old light bulb and placed new bulb. Be sure to change the gasket for your pool light to insure a tight seal ( this product also sold by Inyopools.com). Tighten all of the screws firmly and placed light back in pool. Turn on circuit breaker.
The Most Helpful Review
2 0
(5 out of 5 stars) 400W Bulb Replacement
Reviewed By: Bob H from Naperville, IL ()
Pros: Good price and quick delivery
Cons: None
400W light bulb was tough for me to find online but INYO came through with an exact replacement. Then they combined it with a fair price and quick shipping. I couldn't ask for much more than that.
Was this review helpful to you?
The Most Recent Reviews
1 0
(3 out of 5 stars) pool light
Reviewed By: Pool Fan ()
This light shines very brightly. My experience is that it burns out yearly and must be replaced yearly.
Was this review helpful to you?
(5 out of 5 stars) Great pool light
Reviewed By: rajpari from san jose, ca ()
Inyo customer support helped me identify the correct pool light bulb, gasket and screw for my fixture. It arrived on time as expected. It was easy to remove the old and replace with the new as explained on the INYO website.
Was this review helpful to you?
(5 out of 5 stars) Pool repair
Reviewed By: Evin B. from kill devil hills, NC ()
Pros: Fast delivery, well packaged
Cons: None
I was very happy with the Fast delivery, the lights where packaged very well. Best price I have ever found for these bulbs, I will defiantly do business with you guys again. Keep up the good work guys!
Was this review helpful to you?
(5 out of 5 stars) Light Bulb
Reviewed By: Eric J. from Kissimmee, FL ()
Shipped on time. Not Broken. Works great! Prices were good. Easy to shop this site, lots of choices!
Was this review helpful to you?