Part # GOKIT3
Standard tune up kit for the Hayward Super Pump includes the shaft seal and all o-rings, gaskets and lubricant.
We highly recommend replacing the shaft seal, o-rings and gaskets when replacing your motor. If you use your old shaft seal, it will not mate up properly with the new motor and may leak.
This Tune Up Kit Works on These Pumps:
Tune Up Kit Includes:
For more Pool Pump Motors
Click here for Saltwater Pool Tune Up Kit (GOKIT3SALT)
I recently changed my pool motor and gaskets. I made sure to lubricate all the gaskets with vaseline. A few days later water is leaking from the pump. What did I do wrong? Help please!!
Reply
You never want to use vaseline on any rubber gaskets or o-rings. Vaseline is petroleum based and will deteriorate the rubber quickly. Whenever you change the motor on a pool pump it is recommended that you replace the gaskets and shaft seal as well. A >Go-kit contains the shaft seal, packet of non-petroleum based lubricant and gaskets you will need for your pump. If you already have the gaskets, you can purchase >Magic Lube.
Reply
My pump is not priming even after cleaning impeller. Will purchasing this kit aid in fixing that problem?
Reply
The seal kit can help with loss of prime. I can't guarantee that it will solve your problem. The loss of prime could be from an air leak at the valves or plumbing in front of the pump.
Reply
Will the GoKit3 work with saltwater pools?
Reply
The Tune Up Kit Hayward Super Pump for saltwater pool is GOKIT3SALT.
Reply
I have a model C48K2n143B1
SP-1607-Z1-M
Which seal kit do I need?
Reply
1 to 2 hrs
Nut Drivers, Socket Set, Magic Lube
1 0
First off, the instructional video's on your site are invaluable! I used this kit with a new century pump I purchased from INYO. As long as you follow the steps in the video, you can't go wrong. Be sure to use the supplied lube ( I always have a tube of Magic Lube around for back up),
1 to 2 hrs
Screwdriver, Nut Drivers, Socket Set, Wrench Set
2 0
I bought this kit to fix my pump. I also bought a new motor. Inyo's YouTube has some great videos on how to do the repair. It was relatively easy. I didn't need a new pump, just the motor, but while everything was apart it was time to upgrade the rest of the elements. Turn off the electricity, disconnect the wiring, remove the bolts holding the motor to the pump housing, replace the parts and reassemble. This was the first time I've done this and the whole thing took about 2 hours.
Less than 1 hr
Socket Set
2 0
Disconnected the pump and replacement the rings. It was self explanatory and everything fit exactly where the old ones came off. The lubricant supplied with the kit was enough to use for the entire kit. Inyoupools has youtube videos or videos right on their website to help walk you through step by step.
Less than 1 hr
Screwdriver, Just to get the old seals out
3 0
We replaced the motor, but didn’t have to replace the debris basket. However, at the suggestion of a product specialist, we did go ahead and replace the seals on anything adjacent to the new motor. We are glad we did! The parts arrived as described and fit well.
Less than 1 hr
Screwdriver, Nut Drivers, Pliers, Socket Set, Adjustable Wrench
2 0
Shut off power remove plastic cover take four bolts off place hex wrench to hold shaft remove impeller remove shaft seals Used small screwdriver to push washer part of seal clean with dry rag lube using glove place parts back together change out gaskets reassemble and reconnect. Prime pump with water in screen side Turn on pump-no leaks Watched an old U tube video before starting Done in less than hour!
1 to 2 hrs
Nut Drivers, Pliers, Wrench Set, Bearing puller. Multimeter to check motor.
4 0
Replaced bearings, seals and capacitor. I got a 1hp Superpump for free that was thought to be junk. The main issue was very bad bearings especially the front one likely due to an old shaft seal. Because of this the capacitor blow out also. Total repair time was about an hour and cost was $70. Now a have a perfectly running spare with my current pump ~10 years old and getting a little load.
1. Had the necessary, basic hand tools and bearing puller (if you don’t, HF has them cheap an auto parts store will loan them).
2. Disassemble per the Inyopools video. These are pretty standard motors so not hard to figure out.
3. Cleaned and check motor with multimeter, pressed new bearings on.
4. Re-assembled motor per the video.
5. Replaced all the seals. Save the water slinger because that won’t be in the kit.
6. Checked adjustment on v-switch. This is important on the older motors. Inyopool has a video on this too.
7. Replaced start capacitor.
8. Successful test and high-5’s all around.
Less than 1 hr
Screwdriver, Nut Drivers, Wrench Set, Tongue and groove pliers
2 0
Less than 1 hr
Screwdriver, Nut Drivers, Socket Set
2 0
Less than 1 hr
Screwdriver, Socket Set
2 0
Less than 1 hr
Screwdriver
2 0
Less than 1 hr
Screwdriver, Nut Drivers, Socket Set
3 0
1 to 2 hrs
Screwdriver, Nut Drivers, Socket Set, Wrench Set
2 0
I replaced my pool motor and INYO recommended this Tune Up kit to replace the seals in the pump. The kit had everything I needed including a small tube of silicon lubricant. All parts were exact replacement and fit perfectly. You simply remove the old gaskets and follow the written instructions and or watch the many videos that INYO Pools makes for your viewing and then ease of performing the job, without having any experience. This was easier than I had anticipated. One thing that was a easy but a little tricky is the shaft bearing is in two halves and they have ceramic faces that must mate. One half is white ceramic and that is easy to see and is well described and highlighted in the videos, but like a lot of things when you're looking at the parts it's not black and white 100% which side of the black ceramic 2nd half of the shaft bearing is the shiny side. You don't want to touch the ceramic surface as the oil from your fingers might cause the bearing to burn... after inspecting closely I was able to figure it out.
Less than 1 hr
Screwdriver, Nut Drivers, Pliers, Socket Set
2 0
Less than 1 hr
Screwdriver, Nut Drivers, Socket Set, Wrench Set
2 0
Remove 4 exterior Motor to pump bolts
Remove next 4 bolts on bezel
Loosen rear metal cover screws
Remove impeller by securing the driveshaft nut and turning the impeller
Remove next two covers attached to motor
Turn off breakers
Remove electrical
Replace gaskets, seals and impeller spring
Reassemble in reverse with new motor
2 to 4 hrs
Screwdriver, Nut Drivers, Pliers, Socket Set, Wrench Set
2 0
1. Opened pre-pump strainer basket, and replaced rubber seal in housing top (after lubricating with kit-supplied lube);
2. The following were all replaced after the motor/pump assembly had been removed from the pump housing, and disassembled, per instructional video available online (after being lubricated, of course!):
- Pump diffuser seal;
- Impeller housing-to-motor mount seal;
- Shaft seals in housings (2).
1 to 2 hrs
Screwdriver, Pliers, Socket Set, Wrench Set, Adjustable Wrench
2 0
1. removed old motor from pump housing
2. bolted on new motor to pump housing, as well as replacing old seals with new ones
3. attached impeller and diffuser to motor/pump housing
4. attached new motor/pump housing to filter.
1 to 2 hrs
Screwdriver, Pliers, Socket Set, Wrench Set
2 0
Ordered a new motor from INYO pools. I flt I should get the tune up kit to install it. It was a wise choice as it comes with all the seals needed to replace the motor Installation went smooth.
First took the pump off the filter base. then you separate the motor from the basket. Then remove the impeller and spring bushing. Replace the seal to the basket. The impeller was also worn so I replaced it as well. The motor shaft has a flat section the wold the shaft while you replace the impeller. Reassemble the pump section, note where it is marked top. Put the assembled back on the base. Prime the pump then start it up.
Less than 1 hr
Screwdriver, Nut Drivers, Socket Set
4 0
Pulled everything apart, the seal would not seat. I cracked it. Watched INYO video on replacing pump seals, learned error of my ways, ordered new seal, pump up and running. When am I ever gonna learn??????
1 to 2 hrs
Screwdriver, Socket Set, Adjustable Wrench
3 0
1 to 2 hrs
Screwdriver, Nut Drivers, Pliers, Socket Set, Wrench Set, Adjustable Wrench
4 0
1 to 2 hrs
Pliers, Socket Set, Wrench Set
2 0
1 to 2 hrs
Screwdriver, Pliers, Open end wrench
3 0
First I turned off the breaker to remove power. Then I removed the wires from the pump and removed the 4 bolts. That let me take the pump from the front end where the basket and plumbing is connected.
I brought the pump to the workbench and removed the impeller by placing a wrench on the rear of the shaft and turned the impeller until it loosened up enough to remove it. After removal I cleaned up the shaft and removed the seal with a rubber mallet and screwdriver.
My pump was leaking for quite sometime so I had to remove some rust from the underside of the pump and used spray paint to give it some protection. I installed the new seal with care not to touch the ceramic pieces. Next I put the impeller back on the shaft and put the front end which snapped back on.
I then returned to my pump location and fastened the pump back with the bolts I removed. I reconnected the electrical, turned the breaker back on and filled the basket area with water to start the siphon. Within minutes the pump was back working again. This process took me about an hour. My pump is under a deck so it took a little longer to get to it.
1 to 2 hrs
Screwdriver, Nut Drivers, Pliers, Socket Set, Wrench Set
2 0
We diagnosed that it must be the motor as, the pump would pump but then trip the circuit breaker. I talked with helpful sales people on the phone and ordered a replacement motor for the Haywood Super Pump. My only mistake was not mentioning that we have a salt water generator and we should have ordered the heavier duty shaft seal, but lessons learned.
Less than 1 hr
None
2 0
Less than 1 hr
None
3 1
There isn’t much step by step to give on this item. I replaced the seals one by one as I disassembled the old motor and put the stuff on the new motor. The gasket for the pump lid was very easy to put on as well as the other ones. The only one I had an issue putting in was at the back of the pump that connected the motor to the pump because it would want to pop out as I went around. Eventually I got my fingers spread out far enough to hold the gasket and got it in.
1 to 2 hrs
Screwdriver, Nut Drivers
2 0
Just replaced pump with a Century 1hp. pump. The greatest part of this evaluation was the fantastic support I received from the on-line videos by InYoPools.com and their friendly and helpful staff. Not only the best prices but best service to boot.
2 to 4 hrs
Screwdriver, Nut Drivers, Pliers, Socket Set, Wrench Set, Wire stripper/crimper
4 0
I purchased the correct motor from INYOU and it arrived days sooner than expected. I took the recommendation and ordered the seal kit as well. Finally on Fathers Day I had the time to tackle this daunting project. Always wary of anything electrical, I took every precaution I could to not electrocute myself with my son present. With everything checked and double checked the moment of truth arrived. I three the breakers on and then threw the switch on the timer box and........SUCCESS! The motor turned and the pump started circulating the water. Awesome feeling of overcoming a fear of electricity and knowing I did it right the first time. The tutorials from INYO were perfect and I saved over $ 330.00 doing it myself.
Less than 1 hr
Screwdriver, Socket Set
3 0
Removed pump by disconnecting power removing mounting bolts, impella cover and impella. Replaced pump. Tested same before installation and it didn't work. Contacted customer care and they sent me a new one in two days. Installed same after installing new gaskets upplied in the Super Pump tune up kit and new ceramic bearing
1 to 2 hrs
Screwdriver, Pliers, Socket Set, Wrench Set, Adjustable Wrench
3 0
$266.00
$228.00
$223.00
The Most Recent Reviews
(3 out of 5 stars) Superpump flub
Reviewed By: Jerry S. from Orion, IL ()
Pros: motor seal
Cons: rubber seals
I purchased this kit to facilitate the installation of a new pump motor. The pump seal kit was perfect. I do think that a installation instruction sheet would have been helpfull. The rubber seals did not fit. The strainer seal was about 1 1/4 inches too large, and the disfuser seal was about 1/2 inch too large. My super pump is only 3 years old, so I believe the manufacture did not change the dimensions...
Was this review helpful to you?
(4 out of 5 stars) swimming pool parts & kits
Reviewed By: Frank H. from mississauga, ON ()
Pros: quick
Cons: high shipment fee
received the purchased item quite quickly, somehow, the extra-charge for the shipping fee is high, almost 60% of the item value
Was this review helpful to you?
(5 out of 5 stars) Solved the problem.
Reviewed By: Tom M. from Jamestown, NC ()
Easy to install.
Was this review helpful to you?
(4 out of 5 stars) Take the Guesswork out
Reviewed By: Nathan H. from Wichita, KS ()
Tune Up Kit worked perfectly. Would definitely purchase again next time.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: James T. from Riverdale, UT ()
Just what I needed and arrived when it was supposed too. The costs even including shipping saved me over 30% over what the supply sources in Utah gouge you for.
Was this review helpful to you?
(5 out of 5 stars) tune up kit
Reviewed By: Stacy B. from minneapolis, MN ()
Pros: full kit with everthing needed
was just what I needed for my hayward super pump
Was this review helpful to you?
(3 out of 5 stars) Directions for install
Reviewed By: Ronald S. from Mooresville, NC ()
The only problem is that the gaskets came with no instrutions about the ceramic disk not being touched by the hands. I thankfully read a previous review and on site instructions that mentioned the fact that the disk should not be touch with the bear hand.
Was this review helpful to you?
(5 out of 5 stars) tune up kit
Reviewed By: Michael B. from Albany, NY ()
correct parts and good advice to replace this when replacing the motor
Was this review helpful to you?
(5 out of 5 stars) Great kit
Reviewed By: Julian B. from Liberty Township, OH ()
kit fitted up perfectly - no issues - good clear instructions on line
Was this review helpful to you?
(4 out of 5 stars) Quality Product
Reviewed By: Bruce H. from Irmo, SC ()
Pros: Quality Product
Cons: I still have a leak in my pump. I need to troubleshoot further.
The kit was exactly what I expected and I received it within a few days of my order. It was easily installed.
Was this review helpful to you?
(5 out of 5 stars) tune up kit for pool pump motor
Reviewed By: Susan B. from spring mills, PA ()
this product was in addition to the pool pump motor that I ordered, it was recommended to me buy the knowledgable staff member that received my call.
Was this review helpful to you?
(5 out of 5 stars) Perfect kit, Pump circulates like new.
Reviewed By: John D. from Flemington, NJ ()
Pros: Perfect tune up kit. Pump like new.
Excellent Kit. Easy to install. Pump now works great.
Was this review helpful to you?
(5 out of 5 stars) leak fixed!
Reviewed By: Sean G. from Fairport, NY ()
Easily replaced every gasket in the pump housing and eliminated a huge leak. I went from losing nearly 3" of water in 24hrs to no leak at all.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Steven R. from Catskill, NY ()
Pros: fits perfectly
Cons: no instructions
Pretty simple and straightforward to install. The impeller screws off the motor so you have to hold the motor shaft to unscrew it. I used a long, thin bladed screwdriver wedged into the cooling vane of motor to keep it from spinning.
Was this review helpful to you?
(4 out of 5 stars) tune up kit
Reviewed By: pool man from Netcong, NJ ()
good quality, great addtion to new
Was this review helpful to you?
1 0
(5 out of 5 stars) pump seal kit for Hayward pool motor pump
Reviewed By: Joe T. from Allendale, NJ ()
Pros: Has all seals needed
Cons: none
Has all the seals for when you replace pool motor pump.
Was this review helpful to you?
(5 out of 5 stars) good kit
Reviewed By: Paul W. from Niagara Falls, ON ()
Pros: complete kit
Cons: excessive shipping charges negate deal of kit
Good complete kit at a great price until shipping was added. Box was 10 times bigger then necessary and $11 shipping was excessive when an envelope would have done. Just as cheap to buy at your local pool store. Need to offer combined shipping.
Was this review helpful to you?
(5 out of 5 stars) Inexpensive COMPLETE kit
Reviewed By: Michael F. from Chesapeake, VA ()
Pros: Complete kit
This kit includes ALL the gaskets,seals, and the ceramic disk. Many others don't include all.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Donald B. from Tenafly, NJ ()
Good product! Everything you need to replace the motor.
Was this review helpful to you?
(5 out of 5 stars) Great Tune Up Kit
Reviewed By: John M. from Essex Junction, VT ()
Pros: Great Kit, Easy Installation, Quick Delivery
Cons: None
I ordered this tune up kit to go along with the replacement pump I purchased for my Hayward Super Pump. I changed out all of these seals and everything worked very smootly.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Timothy S. from Milford, MI ()
Pros: Direct Replacement
Received and installed OK
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Stephen P. from Southern Pines, NC ()
All items in kit fit perfectly.
Was this review helpful to you?
(3 out of 5 stars)
Reviewed By: Teresa D. from zeeland, MI ()
was supposed to fit all Super Pumps. not accurate
Was this review helpful to you?
(5 out of 5 stars) Pump motor install kit
Reviewed By: Robert from north canton, OH ()
Cons: none
Nicely packaged,a must have if installin g a new motor in your pump.
Was this review helpful to you?
(5 out of 5 stars) pump kit
Reviewed By: Doug S. from lake charles, LA ()
perfect fit
Was this review helpful to you?
(5 out of 5 stars) Seal it correctly
Reviewed By: Ben Dover from Cullman, AL ()
Pros: Did the job well
Cons: none
The seals on the old motor I was replacing looked like they had been through a grinder. The new seals installed easily and flawlessly.
Was this review helpful to you?
(5 out of 5 stars) PUMP SEAL KIT
Reviewed By: Perry R. from Atwater, OH ()
THIS KIT HAD ALL THE NECESSARY SEALS THAT I NEEDED WHEN INSTALLING A REPLACEMENT PUMP MOTOR. INSTALLING A REPLACEMENT MOTOR AND CHANGING SEALS IS AN EASY TASK FOR ANY DO IT YOURSELFER. SHOULD EVEN BE EASY FOR SOMEONE WHO IS NOT SUPER HANDY WITH TOOLS
Was this review helpful to you?
(4 out of 5 stars) new seal kit
Reviewed By: cateye5312 from Grand Junction, CO ()
Pros: good quality materials
Cons: no instructions
I would give this kit 5 stars except it comes with absolutely no instructions or even a simple diagram of where the seals go. I spent more time finding the seals than I did replacing them.
Was this review helpful to you?
(5 out of 5 stars) Great Hayward Pump Tune Up Kit
Reviewed By: William H. from Stafford, VA ()
Pros: Easy to upgrade
Cons: None
Easy to install; all of the individual pieces fit well with the existing pump parts.
Was this review helpful to you?
(5 out of 5 stars) A little money can savey you a lot.
Reviewed By: Avery L. from Madison, AL ()
Pros: Motor Protection
Cons: None
I had to replace my pump after less than 18 months of service when I opened this spring. It was running when I shut down. The repair man didn't replace the motor seal when it was installed and salt water got into the motor shorting it out. The new seals are easy to install and INYO has very detailed instructions. When spending over 200 dollars for a motor, this is worth every cent.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Michael Q. from Ocean Springs, MS ()
Pros: Easy installation
Cons: None
Iwas replacing a pool pump motor and the company recommended I purchase the complete tune up kit. Boy, was I glad I followed their advice. The kit had everything to make the pool pump motor "new" again. It was VERY to install and my pool pump motor is humming once again.
Was this review helpful to you?
(5 out of 5 stars) Gasket Kit
Reviewed By: David T. from Oxford, OH ()
Pros: Has all the gaskets I need and lubricant too.
Cons: Plastic vacuum pack hard to get off.
I like this kit. Have used it for an earlier pump rebuild. It comes with all the gaskets and seals I need and lubricating grease is included.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Cameron G. from Montgomery AL ()
I purchased this as an additioanl step when replacing my pool pump motor. Very glad I did it because the old gaskets were well worn. The kit is a much better deal than purchasing each gasket separately, which is what my local pool store wanted me to do. On line instructions were also very helpful. Very easy to do if you have the right tools.
Was this review helpful to you?
(5 out of 5 stars) Great Product
Reviewed By: Michele B. from Florence, AL ()
Worked perfectly!
Was this review helpful to you?
1 0
(5 out of 5 stars) Gaskets were great!
Reviewed By: Janet W. ()
Easy to replace gaskets, very helpful in changeout of old motor.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: krb1958 from howell, mi ()
Pros: good product
Very simple to install seals
Was this review helpful to you?
(5 out of 5 stars) complete refurb kit for pool motors
Reviewed By: aquakids from rockaway, NJ ()
Pros: complete kit
Cons: none really
includes all gaskets, include that for pump strainer cover. A bit more $ than just buying the porcelin seals alone, but IMO, pays for itself in peace of mind. PTFE lube also a plus for rubber seals. Totally recommended.
Was this review helpful to you?
(5 out of 5 stars) Exactly what I needed
Reviewed By: Squirrel from Fredericksburg, VA ()
Pros: Perfect!
Cons: None
This kit was exactly what I needed and contained all the seals and parts for my pump including silicone lubricant. Good price too!
Was this review helpful to you?
(4 out of 5 stars)
Reviewed By: Dan H from Brookhaven, PA ()
Pros: Easy to order kit.
Cons: No instructions or diagram to show what seal goes where.
I searched for some time to make sure I had each of the parts I needed to "tune-up" my 1hp Superpump. It was nice to have them all available in one package at a lower cost than I could have purchased each part individually for at my local pool store.
Was this review helpful to you?
(5 out of 5 stars) Good Quality and Every Seal Needed for Pump
Reviewed By: Jukebox Mama from Jonesboro, GA ()
Pros: Complete Kit, Excellent Quality
Cons: Took some time to figure out the spring seal and housing seal
The only reason it took us so long to figure out how to replace the seals is because we'd never done it before. When you remove the old spring seal, the metal piece stays on the spindle. The new kit comes with a new metal piece and you have to remove the old one and replace it. And the housing seal is where you reinstall the pump housing. The diagram looks like it goes where the ceramic seal is. Make sure you remove the old housing seal and the round seal that is inside the pump housing (where the clear plastic top is located). Staff is very helpful and will help if you need it. Am pleased with the kit and the shipping was cheap and no tax so saved more money.
Was this review helpful to you?