Part # GOKIT3
Standard tune up kit for the Hayward Super Pump includes the shaft seal and all o-rings, gaskets and lubricant.
We highly recommend replacing the shaft seal, o-rings and gaskets when replacing your motor. If you use your old shaft seal, it will not mate up properly with the new motor and may leak.
This Tune Up Kit Works on These Pumps:
Tune Up Kit Includes:
For more Pool Pump Motors
Click here for Saltwater Pool Tune Up Kit (GOKIT3SALT)
I recently changed my pool motor and gaskets. I made sure to lubricate all the gaskets with vaseline. A few days later water is leaking from the pump. What did I do wrong? Help please!!
Reply
You never want to use vaseline on any rubber gaskets or o-rings. Vaseline is petroleum based and will deteriorate the rubber quickly. Whenever you change the motor on a pool pump it is recommended that you replace the gaskets and shaft seal as well. A >Go-kit contains the shaft seal, packet of non-petroleum based lubricant and gaskets you will need for your pump. If you already have the gaskets, you can purchase >Magic Lube.
Reply
My pump is not priming even after cleaning impeller. Will purchasing this kit aid in fixing that problem?
Reply
The seal kit can help with loss of prime. I can't guarantee that it will solve your problem. The loss of prime could be from an air leak at the valves or plumbing in front of the pump.
Reply
Will the GoKit3 work with saltwater pools?
Reply
The Tune Up Kit Hayward Super Pump for saltwater pool is GOKIT3SALT.
Reply
I have a model C48K2n143B1
SP-1607-Z1-M
Which seal kit do I need?
Reply
1 to 2 hrs
Nut Drivers, Socket Set, Magic Lube
1 0
First off, the instructional video's on your site are invaluable! I used this kit with a new century pump I purchased from INYO. As long as you follow the steps in the video, you can't go wrong. Be sure to use the supplied lube ( I always have a tube of Magic Lube around for back up),
1 to 2 hrs
Screwdriver, Nut Drivers, Socket Set, Wrench Set
2 0
I bought this kit to fix my pump. I also bought a new motor. Inyo's YouTube has some great videos on how to do the repair. It was relatively easy. I didn't need a new pump, just the motor, but while everything was apart it was time to upgrade the rest of the elements. Turn off the electricity, disconnect the wiring, remove the bolts holding the motor to the pump housing, replace the parts and reassemble. This was the first time I've done this and the whole thing took about 2 hours.
Less than 1 hr
Socket Set
2 0
Disconnected the pump and replacement the rings. It was self explanatory and everything fit exactly where the old ones came off. The lubricant supplied with the kit was enough to use for the entire kit. Inyoupools has youtube videos or videos right on their website to help walk you through step by step.
Less than 1 hr
Screwdriver, Just to get the old seals out
3 0
We replaced the motor, but didn’t have to replace the debris basket. However, at the suggestion of a product specialist, we did go ahead and replace the seals on anything adjacent to the new motor. We are glad we did! The parts arrived as described and fit well.
Less than 1 hr
Screwdriver, Nut Drivers, Pliers, Socket Set, Adjustable Wrench
2 0
Shut off power remove plastic cover take four bolts off place hex wrench to hold shaft remove impeller remove shaft seals Used small screwdriver to push washer part of seal clean with dry rag lube using glove place parts back together change out gaskets reassemble and reconnect. Prime pump with water in screen side Turn on pump-no leaks Watched an old U tube video before starting Done in less than hour!
1 to 2 hrs
Nut Drivers, Pliers, Wrench Set, Bearing puller. Multimeter to check motor.
4 0
Replaced bearings, seals and capacitor. I got a 1hp Superpump for free that was thought to be junk. The main issue was very bad bearings especially the front one likely due to an old shaft seal. Because of this the capacitor blow out also. Total repair time was about an hour and cost was $70. Now a have a perfectly running spare with my current pump ~10 years old and getting a little load.
1. Had the necessary, basic hand tools and bearing puller (if you don’t, HF has them cheap an auto parts store will loan them).
2. Disassemble per the Inyopools video. These are pretty standard motors so not hard to figure out.
3. Cleaned and check motor with multimeter, pressed new bearings on.
4. Re-assembled motor per the video.
5. Replaced all the seals. Save the water slinger because that won’t be in the kit.
6. Checked adjustment on v-switch. This is important on the older motors. Inyopool has a video on this too.
7. Replaced start capacitor.
8. Successful test and high-5’s all around.
Less than 1 hr
Screwdriver, Nut Drivers, Wrench Set, Tongue and groove pliers
2 0
Less than 1 hr
Screwdriver, Nut Drivers, Socket Set
2 0
Less than 1 hr
Screwdriver, Socket Set
2 0
Less than 1 hr
Screwdriver
2 0
Less than 1 hr
Screwdriver, Nut Drivers, Socket Set
3 0
1 to 2 hrs
Screwdriver, Nut Drivers, Socket Set, Wrench Set
2 0
I replaced my pool motor and INYO recommended this Tune Up kit to replace the seals in the pump. The kit had everything I needed including a small tube of silicon lubricant. All parts were exact replacement and fit perfectly. You simply remove the old gaskets and follow the written instructions and or watch the many videos that INYO Pools makes for your viewing and then ease of performing the job, without having any experience. This was easier than I had anticipated. One thing that was a easy but a little tricky is the shaft bearing is in two halves and they have ceramic faces that must mate. One half is white ceramic and that is easy to see and is well described and highlighted in the videos, but like a lot of things when you're looking at the parts it's not black and white 100% which side of the black ceramic 2nd half of the shaft bearing is the shiny side. You don't want to touch the ceramic surface as the oil from your fingers might cause the bearing to burn... after inspecting closely I was able to figure it out.
Less than 1 hr
Screwdriver, Nut Drivers, Pliers, Socket Set
2 0
Less than 1 hr
Screwdriver, Nut Drivers, Socket Set, Wrench Set
2 0
Remove 4 exterior Motor to pump bolts
Remove next 4 bolts on bezel
Loosen rear metal cover screws
Remove impeller by securing the driveshaft nut and turning the impeller
Remove next two covers attached to motor
Turn off breakers
Remove electrical
Replace gaskets, seals and impeller spring
Reassemble in reverse with new motor
2 to 4 hrs
Screwdriver, Nut Drivers, Pliers, Socket Set, Wrench Set
2 0
1. Opened pre-pump strainer basket, and replaced rubber seal in housing top (after lubricating with kit-supplied lube);
2. The following were all replaced after the motor/pump assembly had been removed from the pump housing, and disassembled, per instructional video available online (after being lubricated, of course!):
- Pump diffuser seal;
- Impeller housing-to-motor mount seal;
- Shaft seals in housings (2).
1 to 2 hrs
Screwdriver, Pliers, Socket Set, Wrench Set, Adjustable Wrench
2 0
1. removed old motor from pump housing
2. bolted on new motor to pump housing, as well as replacing old seals with new ones
3. attached impeller and diffuser to motor/pump housing
4. attached new motor/pump housing to filter.
1 to 2 hrs
Screwdriver, Pliers, Socket Set, Wrench Set
2 0
Ordered a new motor from INYO pools. I flt I should get the tune up kit to install it. It was a wise choice as it comes with all the seals needed to replace the motor Installation went smooth.
First took the pump off the filter base. then you separate the motor from the basket. Then remove the impeller and spring bushing. Replace the seal to the basket. The impeller was also worn so I replaced it as well. The motor shaft has a flat section the wold the shaft while you replace the impeller. Reassemble the pump section, note where it is marked top. Put the assembled back on the base. Prime the pump then start it up.
Less than 1 hr
Screwdriver, Nut Drivers, Socket Set
4 0
Pulled everything apart, the seal would not seat. I cracked it. Watched INYO video on replacing pump seals, learned error of my ways, ordered new seal, pump up and running. When am I ever gonna learn??????
1 to 2 hrs
Screwdriver, Socket Set, Adjustable Wrench
3 0
1 to 2 hrs
Screwdriver, Nut Drivers, Pliers, Socket Set, Wrench Set, Adjustable Wrench
4 0
1 to 2 hrs
Pliers, Socket Set, Wrench Set
2 0
1 to 2 hrs
Screwdriver, Pliers, Open end wrench
3 0
First I turned off the breaker to remove power. Then I removed the wires from the pump and removed the 4 bolts. That let me take the pump from the front end where the basket and plumbing is connected.
I brought the pump to the workbench and removed the impeller by placing a wrench on the rear of the shaft and turned the impeller until it loosened up enough to remove it. After removal I cleaned up the shaft and removed the seal with a rubber mallet and screwdriver.
My pump was leaking for quite sometime so I had to remove some rust from the underside of the pump and used spray paint to give it some protection. I installed the new seal with care not to touch the ceramic pieces. Next I put the impeller back on the shaft and put the front end which snapped back on.
I then returned to my pump location and fastened the pump back with the bolts I removed. I reconnected the electrical, turned the breaker back on and filled the basket area with water to start the siphon. Within minutes the pump was back working again. This process took me about an hour. My pump is under a deck so it took a little longer to get to it.
1 to 2 hrs
Screwdriver, Nut Drivers, Pliers, Socket Set, Wrench Set
2 0
We diagnosed that it must be the motor as, the pump would pump but then trip the circuit breaker. I talked with helpful sales people on the phone and ordered a replacement motor for the Haywood Super Pump. My only mistake was not mentioning that we have a salt water generator and we should have ordered the heavier duty shaft seal, but lessons learned.
Less than 1 hr
None
2 0
Less than 1 hr
None
3 1
There isn’t much step by step to give on this item. I replaced the seals one by one as I disassembled the old motor and put the stuff on the new motor. The gasket for the pump lid was very easy to put on as well as the other ones. The only one I had an issue putting in was at the back of the pump that connected the motor to the pump because it would want to pop out as I went around. Eventually I got my fingers spread out far enough to hold the gasket and got it in.
1 to 2 hrs
Screwdriver, Nut Drivers
2 0
Just replaced pump with a Century 1hp. pump. The greatest part of this evaluation was the fantastic support I received from the on-line videos by InYoPools.com and their friendly and helpful staff. Not only the best prices but best service to boot.
2 to 4 hrs
Screwdriver, Nut Drivers, Pliers, Socket Set, Wrench Set, Wire stripper/crimper
4 0
I purchased the correct motor from INYOU and it arrived days sooner than expected. I took the recommendation and ordered the seal kit as well. Finally on Fathers Day I had the time to tackle this daunting project. Always wary of anything electrical, I took every precaution I could to not electrocute myself with my son present. With everything checked and double checked the moment of truth arrived. I three the breakers on and then threw the switch on the timer box and........SUCCESS! The motor turned and the pump started circulating the water. Awesome feeling of overcoming a fear of electricity and knowing I did it right the first time. The tutorials from INYO were perfect and I saved over $ 330.00 doing it myself.
Less than 1 hr
Screwdriver, Socket Set
3 0
Removed pump by disconnecting power removing mounting bolts, impella cover and impella. Replaced pump. Tested same before installation and it didn't work. Contacted customer care and they sent me a new one in two days. Installed same after installing new gaskets upplied in the Super Pump tune up kit and new ceramic bearing
1 to 2 hrs
Screwdriver, Pliers, Socket Set, Wrench Set, Adjustable Wrench
3 0
$266.00
$228.00
$223.00
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Here right on time!
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Tune up kit fixed my leaking pump in thirty minutes. Easy to follow instructions.
Was this review helpful to you?
(5 out of 5 stars) Easy to install
Reviewed By: Patrick ()
Easy to install , a must when replacing motor
Was this review helpful to you?
(5 out of 5 stars) Pump replacement
Reviewed By: Inyo Customer ()
easy to use all essential parts
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Parts were put in the same box as the motor!
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Had to replace motor so I bought this kit to accompany the new motor. Great product and parts were a perfect fit.
Was this review helpful to you?
(5 out of 5 stars) This kit comes with everything you need. A must purchase when replacing an old pool pump.
Reviewed By: PATTIE S. from Dacula, GA ()
Pros: All items included
Cons: shaft seal is a little tricky to figure out ceramic side.
This is a must have kit when you are putting on a new pool pump. Seriously, if you are going to have everything apart, you might as well make everything as good as new! The kit is very easy to use and Inyopool offers step by step videos, so easy a monkey could do the project (not picking on monkeys, just saying). The kit also comes with lube, so you have nothing additional needed.
Was this review helpful to you?
(5 out of 5 stars) Excellent fit on all the parts
Reviewed By: Gary B. from No. Virginia ()
Pros: Exact replacement
Cons: none
I purchased the tune up kit, per recommendation from INYO, when I replaced my pool pump motor. Everything fit exactly as designed. Since I was closing the pool for the season, I have not yet tested the water sealing effectiveness but have no doubt that all is well. All the parts were exact replacements for the parts that served me well for the past 7 years with the old pump setup.
Was this review helpful to you?
(5 out of 5 stars) geat tune up for pump motor
Reviewed By: REGIS C H. from rome ny ()
Pros: quality and quick delievery
Cons: cost
product is excellent! cost a little high. amazon selling product 50% lower than you.
Was this review helpful to you?
(5 out of 5 stars) Definitely worth it
Reviewed By: SG GolfEdge from Cream Ridge, NJ ()
Pros: Perfect fit
Cons: None
It's a small cost in comparison to everything else you would need but it is a must to replace all gaskets as provided in the kit.
Was this review helpful to you?
(5 out of 5 stars) So far so good.
Reviewed By: James O. from Haddon Heights, NJ ()
So far so good, new seals installed with no issues, great help in looking on line to install the impeller seal, video was missing a step but direction had the step.
Was this review helpful to you?
(5 out of 5 stars) Just what is needed
Reviewed By: Sunshine from Jacksonville, FL ()
I replaced my pool pump and wanted to make sure all the seals were up to date. This kit solved all that.
Was this review helpful to you?
(5 out of 5 stars) INYO POOL SUPPLIER
Reviewed By: Charles M. from PA ()
Excellent service. Superior customer support.
Was this review helpful to you?
(5 out of 5 stars) all needed parts
Reviewed By: Barry M. M. from Plantation, FL ()
Pros: all parts included
Cons: none
This kit contains all needed parts to replace pump motor
Was this review helpful to you?
(5 out of 5 stars) tune up gasket set
Reviewed By: tank from Kenton, TN ()
Pros: needed parts, good videos
Cons: packaging wrap is tight on seals
The set had the necessary parts for the job. Use caution opening the set to keep from cutting the gaskets. The videos on the INYO site about installation are very helpful. WATCH them before OPENING PACKAGE because you are not supposed to touch the face of the ceramic seals.
Was this review helpful to you?
(4 out of 5 stars) No Surprises
Reviewed By: Matt S. from Marysville, OH ()
Pros: Correct Specs, Fair price
Collection of the most frequently needed seals for Hayward system. Everyone likely will need to replace at least one of these each season, which is why it makes sense to just replace all when disassembling, etc.
Was this review helpful to you?
(5 out of 5 stars) just what I needed
Reviewed By: Anthony D. from south jersey ()
my pump system was way over due for a tune up. This worked perfectly
Was this review helpful to you?
(4 out of 5 stars) EXACT FIT
Reviewed By: RICHARD G. from MILLTOWN, NJ ()
Pros: EXACT FIT
Cons: BIT PRICEY
PROPER REPLACEMENT BELT/FLANGE, ETC FOR MY NEW MOTOR.
Was this review helpful to you?
(4 out of 5 stars) Correct parts
Reviewed By: Mary D. ()
IP recommended these parts and I ordered/received them quickly. Installed them and they were the correct parts.
Was this review helpful to you?
(5 out of 5 stars) Great Tune Up Kit
Reviewed By: Stephen B. ()
Pros: Perfectly sealed, contains all parts needed
Cons: none
Had to replace my failed Hayward Super Pump on my inground chlorine pool, and bought this kit to make sure I had no leaks or issues and it was perfect! Got it right the first time.
Was this review helpful to you?
(5 out of 5 stars) Seal Kit
Reviewed By: Robin B. from Smiths, Al ()
Exactly what I needed. Arrived on time and at a good price.
Was this review helpful to you?
(4 out of 5 stars) Tune Up Kit Hayward Super Pump
Reviewed By: Mark T. from Daytona FL ()
Pros: Everything you need
Cons: packaging cumbersome, install video needs updating
Purchased the Tune Up Kit Hayward Super Pump in conjunction with A.O. Smith 2 H.P Round Flange Up Rate Replacement Motor (UST1202) Motor replaced five year old unit. Not sure pump seals needed replacing, but install was fast and easy. Note the INYO video does not show that the rubber bearing on the ceramic seal must be removed as well
Was this review helpful to you?
(4 out of 5 stars) no instructions pump leaks
Reviewed By: inexperienced from Ohio ()
Instructions could have been better.I'm not sure where I went wrong but the pump has a small leak.
Was this review helpful to you?
(5 out of 5 stars) Perfect fit
Reviewed By: GrandO ()
The tune up kit parts were the perfect fit and were a reasonable price.
Was this review helpful to you?
(5 out of 5 stars) Easy install
Reviewed By: Elton S. from Omaha, Ne ()
Pros: everything you need
Cons: none
Fast and easy installation. Absolutely everything you need to rebuild your pump motor.
Was this review helpful to you?
(5 out of 5 stars) SEAL KIT
Reviewed By: JIM C. from MIRAMAR, FL ()
Pros: perfect fit, all parts needed included
Cons: None
This is a seal kit and it has all you need to install the new pump motor. All parts are to exact specs and just like original equipment. Not much else to say on this simple , easy to use product.
Was this review helpful to you?
(4 out of 5 stars) Gokit
Reviewed By: Ron L. from Ohio ()
Pros: fit perfectly
Cons: costly
online chat helped me choose the proper seals kit which fit perfectly.
Was this review helpful to you?
(5 out of 5 stars) Super pump tune up kit is super!!
Reviewed By: Curtcat from Hartsville, SC ()
Pros: Complete
Everything needed is included and easy installation. Great service too!!
Was this review helpful to you?
(5 out of 5 stars) Rebuild Kit for Hayward Super Pump
Reviewed By: Dave M. from Albany, NY ()
Very good product. All of the parts you need, including the silicone lubricant for assembly in one bag. Go with the recommendation to get this when you replace a motor on your pump. Without a new shaft seal, I suspect my new motor's front bearing would have been toast after one season.
Was this review helpful to you?
(5 out of 5 stars) Use it when replacing the motor
Reviewed By: Paul L. from Tennessee ()
Pros: Fit perfectly
Do the right thing and renew the seals when you replace the motor.
Was this review helpful to you?
(5 out of 5 stars) As advertised
Reviewed By: Eli M. from East tennessee ()
All seals fit well. Prompt delivery.
Was this review helpful to you?
(5 out of 5 stars) Go Kit
Reviewed By: Daniel G. from Sinking Spring, PA ()
Pros: Fast and easy
Cons: none
Go Kit is a complete kit that has everything you need to repair a leaking pump.
Was this review helpful to you?
(5 out of 5 stars) Yep - does the job.
Reviewed By: drum365 from Sacramento, CA ()
Contains all the parts, does everything I needed. Great price.
Was this review helpful to you?
(5 out of 5 stars) everything you need!!!
Reviewed By: Joe C. from OHIO ()
Cons: none
Was this review helpful to you?
(5 out of 5 stars) Super fast delivery. Easy to install.
Reviewed By: Kane H. from Alabama ()
Pros: Easy installation
Cons: None
Bought motor and GoKit as recommended. Easy installation
Was this review helpful to you?
(5 out of 5 stars) Hayward Super Pump Go Kit
Reviewed By: Valerie N. from Clarksville, TN ()
Pros: Everything you in need in one kit
Cons: No instructions
Received item as described but my only reason for not giving it 5 stars is that there are no instructions that come with the kit. So if you don't know where the gaskets go or how to install the shaft seal then you have to go online to research it.
Was this review helpful to you?
(5 out of 5 stars) Easy Install
Reviewed By: jules from Annapolis,MD ()
Pros: Easy Install
Cons: NONE
Was this review helpful to you?
(5 out of 5 stars) pool pump tune up kit
Reviewed By: Ted L. ()
Contained all the gaskets and parts needed to stop my leaky pump. Worked great
Was this review helpful to you?
(4 out of 5 stars) Not sure if it is the right kit...
Reviewed By: Traci P. from Festus, MO ()
Pros: handy kit to make sure you have fresh gaskets on the new motor
Cons: No instructions with the kit
I'd have given the full five star rating except the one piece (it goes on the impeller) did not fit and we had to use the old one (which was really only a few days old - it was the original "try to fix the loud motor before having to buy a new one!" fix. This made me question if it was the right kit for our new motor...the gaskets were all fine, in fact I am pretty sure there were a few other pcs of gaskets than what is shown above...
Was this review helpful to you?
(5 out of 5 stars) Very useful
Reviewed By: Karen J. from Wilson nc ()
Gaskets used when put new motor in. Recommended by staff. How to guides on website very useful.
Was this review helpful to you?