Part # 630
Dimensions 4.75" L x 1.5" W x 1" D
Designed by leading o-ring and gasket manufacturer Aladdin, Magic Lube was created as an alternative to petroleum based lubricants that corrode rubber and cause leakage. Magic Lube is Teflon based and safe for use on most rubbers, plastics and metals.
Need a larger size? Get the 4 ox tube here! The silicone lubricant version is here.
Strongly recommended for all pump and filter o-rings.
I recently changed my pool motor and gaskets. I made sure to lubricate all the gaskets with vaseline. A few days later water is leaking from the pump. What did I do wrong? Help please!!
Reply
You never want to use vaseline on any rubber gaskets or o-rings. Vaseline is petroleum based and will deteriorate the rubber quickly. Whenever you change the motor on a pool pump it is recommended that you replace the gaskets and shaft seal as well. A >Go-kit contains the shaft seal, packet of non-petroleum based lubricant and gaskets you will need for your pump. If you already have the gaskets, you can purchase >Magic Lube.
Reply
I just placed an order for some O-rings and forgot the lube would it be possible to add a tube of Magic lube to the order #673751?
Reply
Doug, you would have to purchase the lube separately, or you can buy it locally at a hardware store.
Reply
I plan to use this Magic Lube #630 on my Polyurethane bushings on my truck but I cannot find information anywhere that would tell me that this lube is safe with polyurethanes. I've even looked on safety data sheets (even here) and all it says it that it is safe with MOST rubbers.
Can anyone tell me if this Magic Lube #630 is safe to use on Polyurethane bushings? If so, can you please let me know where to look up this info so I can see it firsthand? That would be most appreciated! Thanks
Reply
Hi, Mikegyver. Unfortunately, I was not able to find any info confirming that the Magic Lube lubricant can be used on polyurethane bushing. You may want to contact Aladdin at 1.800.854.2466.
Reply
More than 8 hrs
Screwdriver, Socket Set
1 0
Pulled pump apart and went to put back together and the lube provided to put back together included silicone and FPTE. The pump specifically says “never” use silicone or FTPE on the pump that will result in early failure. Thanks for nothing!
Less than 1 hr
Screwdriver, Pliers, Socket Set, Wrench Set
2 0
I had to replace the seals in my pump, therefore ordered the GOKIT38 and this Magic Lube to fix this big problem.
The Magic Lube was amazing, I applied it generously to every seal, achieving a successful repair.
It is a high-quality product at a very affordable price, surely this repair will last a long time!
Less than 1 hr
None
3 1
I use Magic Lube on all o-rings and seals. I usually clean/lube seals and rings in beginning of season and have no issues all year long! Magic Lube is the best! Thanks
Less than 1 hr
None
2 0
Since I have a new pool, several items needed to be purchased to do proper maintenance of the pool. I know that many people use Vaseline to lubricate O rings on the pump. Problem is that even though it will work for a short period of time, why not spend a small amount of money for some Teflon grease and the rings will last longer. Use Teflon grease for any O ring on your equipment
1.Remove cover of pool pump.
2. Carefully remove O ring.
3. Inspect O ring for any cracks, damage, etc.
3. Clean O ring if undamaged
4. Lubricate O ring with Teflon grease ( doesn't have to be a lot).
5. Set O ring aside and finish maintenance of pump.
6. Carefully put cover back on pool pump.
Less than 1 hr
Wrench Set
3 0
Less than 1 hr
None
3 0
It's the beginning of pool season in central Florida. I disassembled my motor from the pump housing after seeing a leak, noticed the condition of the seals and pump parts, ordered parts from Inyopools.com that I needed after reviewing their How to Videos (Matt & Rob) and detailed illustrations on my pump and Motor. I lubricated and replaced the the seals and other parts and it's working great. I had seen other online videos about pool lubricants and many people were not using the correct lube. Not only will it make the pool pump work properly but the seals will also last longer.
Less than 1 hr
I used my finger tips
4 2
Less than 1 hr
I used my finger tips
2 0
Less than 1 hr
None
3 0
1. I closed the valves for the inlet and outlet of the filter.
2. Drained the water to below the cover joint.
3. Removed the closure ring and the cover and then removed the existing o-ring.
3. I ordered a new O- ring gasket for body/top joint.
4. It was recommended that I coat the new O - Ring with the Magic Lube O-Ring Lubricant 5. I coated the O - Ring and reinstalled it and the cover on the filter.
6. Refilled the filter allowing the air to vent and opened the inlet and outlet valves.
The project was successful
The Most Helpful Review
8 0
(5 out of 5 stars) Great stuff
Reviewed By: alkeme ()
Great lubricant feels thick to the touch and works wonders on rubber o-rings and gaskets.
Was this review helpful to you?
The Most Recent Reviews
1 0
(5 out of 5 stars) O-ring lube
Reviewed By: Inyo Customer ()
Does the job.
Was this review helpful to you?
(5 out of 5 stars) Gasket lube
Reviewed By: Inyo Customer ()
Works as advertised .
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Works good
Was this review helpful to you?
(4 out of 5 stars)
Reviewed By: Inyo Customer ()
Very good product for gaskets
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Always have to have it..
Was this review helpful to you?
(5 out of 5 stars) Replace new Century motor on Jandy pool pump
Reviewed By: Inyo Customer ()
Worked extremely well.
Was this review helpful to you?
(5 out of 5 stars) Great price
Reviewed By: Inyo Customer ()
great price,
Was this review helpful to you?