I have an AquaRite that uses the t-cell-15. The system is 5/6 years old. Do I need a soft ware update?
Reply
No you would not need a software update, the GLXCELL15 would work fine with your system here >http://www.inyopools.com/Products/02100023001296.htm The GLXCELL15 comes without the flow switch which you would not require. The only time you would need a software upgrade is if you went with one of the smaller cells which just came out in 2009 if for example you tried to install a TCELL3 your software would not recognize this cell but the GLXCELL15 (TCELL15) is recognized by all versions of the software.
Reply
Does the Hayward GLXCELL15 (T-CELL-15) come with a flow switch?
Reply
No, the GLXCELL15 does not come with a flow switch. Most of the time the flow switch does not need to be replaced as often as the salt cell.
Reply
How do I clean the TCELL15?
Reply
To clean the TCELL15 you will need to first use a water hose to try and hose off the scale build up. Then use a water to muriatic acid mixture of 4 to 1 to clean the plates. Always add the acid to the water. Let stand for approximately 15 minutes. You can then rinse and reinstall.
Reply
Absolutely correct, it's always the three AAA+W never the other way around. (Always Add Acid to Water)
Reply
Will this work with an Aqua Logic system or only the Aqua Rite system? Is there a difference between t cell 15 and 15w?
Reply
The GLXCELL15 will work with the AquaRite, AquaLogic and ProLogic systems. Depending on the age of your system, you may want to double check yoru software revision. The difference between the 2 cell is that the GLXCELL15 has a 3 year warranty and the GLXCELL15W has only a 1 year warranty.
Reply
I have a Hayward Gold Line Salt System witha GLX15 cell and now the control box ys telling me that there is no power to the cell.-How should I do to check what is wrong?
Reply
Elias, Remove the cover and replace the fuse, if your still having the same problem contact Hayward Tech Support at (908) 355-7995.
Reply
I clean my cell from my pool and I get an answer from the system that I need to check the cell, what to do, please note this will be the third summer with this cell. Thank you.
Reply
Johanne, You'll need to remove the cell and inspect the cell for scaling. Here's a video on How To Clean a Hayward AquaRite Turbo Cell.
Reply
I have all Hayward equip T15 CELL IS VERY CLEAN GET STRANGE DISPLAYS ie. MORE LIKE metric no salt how to reset ? THANKS
Reply
Hi Armand, Instructions to switch display from Metric to English can be found on page 7 of the Goldline Aquarite Owners Manual under "Salt Display."
Reply
I just replaced my GLX PCB RITE board ,now it is reading checksalt, know there is plenty of salt in the pool, also says check cell ,took it out washed it ,put it back ,still the same ,cell is very old, how can I be sure cell needs to be replaced? I don't want to keep wasting money....... thanks Glenn
Reply
I'd recommend taking it to a pool store that tests salt cells so you can be sure if it's still good.
Reply
I have a tcell 15 unit. I live in Thailand. The replacement costs is extremely high. I will be in the USA for the month of JULY. Will a USA bought unit work in a country where we have 220 voltage?
Reply
Mark, The voltage is set on the board. The GLXCELL15 work with 230v and 115v. Please note that this product will not have any warranty outside of the United States.
Reply
I replaced my board with your replacement 2 weeks ago and all seemed fine - now stating check cell and no flow - I have a TCell 15 and see that it says for 40,000G pools - mine is only 22,500G. Is this overkill? Do I need to replace with the same model/style or ....?
Reply
Hi Kevin, If you need to replace the cell then you will have to replace it with the same size.
Reply
is the tcell 50 software with older controllers say 10 years ago?
I have heard that there may be controller incompatiblitieies. My systemj is reading temperature etc but is NOT producing chlorine and the number is 1000 and decreasing every day
cost of the new unit from you all is? and availablity is?
thank you
John Hardiman consider this as an urgent emeila
Reply
Hi John, The TCELL15 cell is compatible with older controllers that are 10 years old.
Reply
I am getting a no flow sign does that mean i need to replace the T-Cell 15?
Reply
Hello Lisa, you would want to get a AquaRite Flow Switch W/ 2" & 15' Cable (GLX-FLO) you can look at this here http://www.inyopools.com/Products/07501352049135.htm
Reply
My T Cell 15 in giving me a readying of high temperature, inspect cell, no flow rate and not producing any clorine. Is there anything I can do other than replacing the cell?
Reply
Hello Rey, You can call Hayward 800-657-2287 to talk to tech support to see if they could recalibrate anything on the salt system and determine whether you just need to adjust your system or if you need to replace the cell.
Reply
I have a T-Cell-15, My pool control panel says "Pool Chlorinator 30%" "Chlorinator Off - High Salt Amps"
Screen Says "Main Software Revision 2.85" "Display Software Revision 3.11" What do you suggest so that I can get my pool back to salt. Aqua Plus Control Panel.......last year it was saying "no cell power" but doesn't anymore.
Reply
Hi, Kevin. That error message indicates that the salt level in your pool is higher than normal. You would need to test your salt level to determine the actual salt level of your pool. If the salt level is higher than 3400 ppm you will need to dilute the pool by adding fresh water.
Reply
My pool is 12,000 gallons. I have a T 15 salt cell. I think I need to replace it. Can I use a T-3 instead since the cost is so much lower?
Reply
Hi, James. You can replace the T-Cell 15 with the T-Cell 3 if your controller has a software revision of 1.50 or higher. Also, it is price lower but it will not last as long as the T-Cell 15 on your pool. The lower percentage that the cell run on the longer the cell will last.
Reply
I need to replace my T5 salt cell. Can I just upgrade to the T15 cell ? Pool is around 20,000 gallons and I think the T5 is having a hard time keeping up, The panel is a PLPlus20G.
Thanks
Reply
Yes, if you have a 20,000 gallon pool I would recommend the T15 because the cell will not have to work as hard making it last longer.
Reply
Hi, I have a 10 year old t15 cell with A 10000-12000 gallon pool that has stopped working. What new cell can I replace it with?
Reply
Hi. Since the T15 cell lasted that long I would recommend that you replace it with another T15 cell.
Reply
I replaced my tcell 15 last month. I'm getting a message that says - Chlorinator Off No flow - Is my flow switch the problem? Can my circuit board be malfuntioning?
Reply
Hello Jack, any light that says "no flow" is related to your flow switch needing to be replaced.
Reply
I am currently in the UK and trying to find a T15 salt cell for my Hayward Aquarite Chlorinator. I need the replacement for my swimming pool in Tobago, Caribbean. Can you give me a price in GBP and do you deliver to Tobago?
Reply
Email me a postal code and I can email you a quote with the shipping charge to Tobago.
Reply
My system is currently using a T3 cell which I believe is too small. My pool is closer to 20K gallons and in SW Florida. I would like to upgrade to a T15 cell. My question is are the cells the same length and width? I have very limited space.
Reply
Harold, What salt system do you have? The system will need to be able to see the larger cell type.
Reply
Are these units new or refurbished. What is the difference between the T15 and the GLXCE15
Reply
These units are new. The T15 cell and the CLXCELL15 are the same cell, the model name is T15 and the part # is GLXCELL15
Reply
Had my t-cell 15 tested & it showed ok. When pump starts, salt reading is approx. 2800, but drops to about 1600 or less after run cycle done. By next day, reading is about 900.
Voltage reading varies daily from 3.7-4.2
Cell is approx. 4 years old. Even though cell tested ok, does this mean it is near end of life??
Reply
Hi, Gary. The correct operating voltage should range between 22.0 – 26.0 VDC and the amp range between 3.1 – 8.0 when using a T-CELL-15. The issue could be the cell or the PC Board.
Reply
hello,
I am adding an SWG to my pool this year. I currently do not have one, what else would be needed to add this to the pool. I have a Hayward control box which will support a chlorine generator.
Reply
Hi, I have a bioguard MS-10 control panel w/ a hayward turbo cell T-CELL-15 which is over 10 yrs. old. My control panel is working properly but my cell is generating very little chlorine even with the control panel dial turned up to 80 even 100. But u stated in your Q&A to a person who said they also have a MS-10 controller that this cell is only compatible with the Hayward salt system. So which is the correct Hayward turbo cell model I need exactly like the one I have now.
Reply
I have high salt in my system for the last few days now i getting a light sayin check T Cell?
Reply
I am getting a flashing light saying check cell. I have high salt for a few days and have been draining and refilling a foot or so a day off of my pool and the level of salt is dropping but still high.
Reply
If the ‘Inspect Cell’ light flashes by itself, it is an early indication that the cell life is coming to an end. Each cell is equipped with 500 operational hours and requires a manual reset once it expires. The remedy is to reset the cell by holding down the ‘Diagnostic’ button for 3-5 seconds.
Reply
I need a new cell for my system. The manufacturer is Blue Essence by Hayward. T cell-5. 20,000 gallon capacity.
What cell do you recommend as I have currently a Compupool cell on there now ?
Reply
If my pool is only 12,000 gals, why would I need a cell that handles up to 40,000 gals? This is the same size cell that was installed when the pool was put in. I’m just trying to understand the logic.
Reply
Hi James, here is a video we created that might help explain. Poolside Chat Episode #3 Salt Chlorine Generator Sizes
Reply
System originally installed in Oct 2013 with TCell9. Have a Pro-logic PL-P-4, main software rev 4.40, webster firmware rev 01.00, rf base rev 3.00 and AQL-CHEM. Can I upgrade and replace the TCell9 with TCell15? Thanks
Reply
Hi, Brian. Yes, you can replace your TCELL9 with a TCELL15.
Reply
Can you help me determine if the to pictures are comparable. Just purchased the t15 cell and I cant seem to raise the free chlorine in my pool. Either they are not compatible or the control system is not working. Please help
Hi Mike, This cell is compatible with your system. I would take a chlorine reading directly at the return jet and most likely you will get a chlorine reading. If so then check you CYA as most likely it is too low and the chlorine is getting quickly burnt off by the summer sun. I'm going through this exact same thing with my pool as my CYA was down to 10.
Reply
Is INYOPools an authorized dealer for this Hayward cell? When I checked the Hayward website they only direct to local pool suppliers, not online suppliers. If I have a problem within the warranty period what will I have to do to get it checked or replaced?
Reply
Hi, Bill. We're an authorized online retailer for Hayward products. You will just reach to Hayward and follow their warranty procedures.
Reply
Can you replace a Hayward Turbo Cell GLX-CELL-15-W with a Hayward Goldline T-Cell-15 TurboCell. The pool is 30,000 gallons. The cell hadn't been replaced in 10 year and doesn't produce enough chlorine.
Reply
Hi, Nathan. Yes, you can replace a GLX-CELL-15-W cell with a T-Cell-15.
Reply
Our local pool store just replaced a t-cell, Turbo Cell Tcell940 - Ext. Life. I cannot find this part on your website. I wanted to check out the list price because I feel that their pricing was quite high for the part. Please advise what your list price is for this item.
Thank you.
Reply
Good day, the Tcell940 would be a trade grade item not sold online.We have the GLXCELL15 or the Pureline Replacement T-15 Cell for AquaRite (2 Year Warranty) - PL7106.
Reply
my T-cell ur to five years old after watching your video I pulled the cell off to see if it was corroded. The cell was very clean maybe too clean. How can I tell if the unit is working. Second question is how do I know if the censor that controls it is workings their a way I cn test it.Thank you
Reply
Hi, Ken. The unit will be making chlorine if everything is functioning. The controller will have the proper Cell Voltage 22-32 VDC and Cell Amps 3.1 - 8.0 Amps. You can check with your local pool supply store to see if they have a cell tester.
Reply
I have an AquaRite w/ no Cl production despite adequate salt (water test). Lights: solid low salt/inspect cell. I assumed the T-15 (8 yrs old & cleaned) failed, but before buying I had pool store check it and it passed. Was told to recalibrate the salt level, but panel won't do it (salt level is 0 after 5th button press, no countdown). I also get 0 amps, which I read may mean a bad PCB. But if unit displays 2600 salt, all cell activity stops and amps = 0, right? Please help, new T-15 or PCB?
Hi, Ken. We've seen this issue caused by a bad cell and or Main PCB. The cell is 8 years old which they do not last that long. There is not much life left in the cell, I recommend replacing both components.
Reply
Hi, I need to replace my Goldline sallt cell The pureline (seems to be the same thing) is $399. Can that replace the GLX -15 Goldline/Aquarite cells? What is the difference in the cells since there is $200 difference in the costs?
Reply
Mitch, the Pureline Replacement T-15 Cell for AquaRite (2 Year Warranty) - PL7106 would be a compatible cell replacement for your AquaRite Replacement Cell (TCELL15) - GLX-CELL-15. The difference between the two cells would be the cell manufacturer (Hayward vs. Pureline) and the warranty (2-years vs. 3-years).
Reply
Hi, I need to replace my Goldline sallt cell The pureline (seems to be the same thing) is $399. Can that replace the GLX -15 Goldline/Aquarite cells? What is the difference in the cells since there is $200 difference in the costs?
Reply
Hi, Mitch. You can use the Pureline T-15 Cell (2 Year Warranty) - PL7106 if you have the Aquarite with a software rev. 1.5 and higher.
Reply
My AquaRite controller shows r1.4. Is it possible to upgrade the software on this unit? S/N 60839
-W3T-CELL-15.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-W3T-CELL-15.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Hayward AquaRite Replacement T-CELL-15, 40,000 Gal Pool, TurboCell, Model W3T-CELL-15")
The image confirms "The Aqua Collection from Goldline" and it has a light for Aqua Link RS. Unfortunately, no we do not advise the replacement. Please upload more images of the entire equipment pad showing all valves, we will review for a possible system to replace the current The Aqua Collection from Goldline with Aqua Link RS Salt System.
Reply
How do I know if I have the software revision or not. I just purchased the new control panel. Did that have the new software in it? If not, how do I determine in I have the new software or not. Also, what differences are there between the Goldline/Aquarite cell to the pureline cell besides $200?
Reply
Hello, Unfortunately, we are not certified Hayward reps to accurately troubleshoot this unit for you. We recommend contacting them at 908-351-5400 with that question.
Reply
We had our pool built in 2006. The contractor installed a Hayward Aqualogic Goldline / Chlorinator cell that needs to be
replaced. Firm software is 2.66. The motherboard works excellent.
I understand Aqualogic was discontinued in 2008 and Prologic with firmware of 4.6 and higher took over.
Do you have a chlorinator cell to replace my cell(Aqualogic)?
I do understand my system is between AquaRite and Prologic.
Reply
Hi Gabe, we likely do carry the replacement cell for your Hayward Goldline Aqualogic salt system. Could you send us a few photos of the cell itself and the label on it? To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
Reply
Considering the conversion to saltwater, on average how long would a TCELL15 last?
Reply
Hi Paul, there are 1-year TCELL's that last on average of 1-2 years and there are the 3-year T-CELLS that last approximately 3-5 years.
Reply
I have a Hayward T-Cell-9 that I need to replace. I think I need the T-Cell-15 as my pool has bout 35k gallons. I have a few questions:
Can I upgrade to a larger cell?
The Hayward warranty states 1 yr but the website states 3yr- can you explain the difference?
Will a non-Hayward product work just as well? There is a big price differnce.
Thank you.
Reply
Hi Heather, if your mainboard has the option to change the cell size then yes you can use a TCELL15. There are both 1 year and 3-year versions of the cell and generic models are fair in comparison to the original Hayward manufacturer versions.
Reply
salt cell reads 7000 water test reads 3600
Reply
Hi Stanley, most often this is associated with the cell going bad. I would suggest having it tested at a local pool retailer. It is a free test.
Reply
what is the correct range for keeping your pool salt level my I think its 3000 - 3200 is that correct
Reply
Hi David, each model salt system has similar but could be slightly different required salt level ranges however this Hayward Aquarite series will function well with a salt range of 3000-3200.
Reply
bought a new acuarite salt cell t15 40thousand gallon why is mine only came with a one year warrenty and see on line they come with 3 years
Reply
Hi Donald, Hayward does manufacture two versions of the TCELL15. A one and 3-year version. You may want to check the specific model number and serial number to confirm.
Reply
What cell setting do I select in the Aquarite controller when installing the Hayward W3T-CELL-15?
Reply
Please see our "How To Change the Displayed Cell Size on an Aqua Rite SCG" how-to guide by clicking here to walk you through that process.
Reply
If i need to replace the salt cell while under warranty, do you have a local distributor in Los Angeles County / Torrance area? how long will it take to exchange / replace?
Reply
Need to replace my Goldline Chlorinator Cell 15. Just checking to make sure this is the correct one. Also, would there need to be any changes on the current panel with regard to software revisions. Thanks so much!
-W3T-CELL-15-8825fd21-9e44-4958-ac2a-99d074ac69c4.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-W3T-CELL-15-8825fd21-9e44-4958-ac2a-99d074ac69c4.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Hayward AquaRite Replacement T-CELL-15, 40,000 Gal Pool, TurboCell, Model W3T-CELL-15")
Hi, Adam. This is a direct replacement, no modifications will have to be made.
Reply
MODEL # W3T-CELL-15
BY GOLDLINE CONTROLS Is this compatible with a Hayward gold line salt water system with a firm ware of 1.4 ??
Reply
Hello, Thomas. the W3T-CELL-15 is compatible with the firmware revision 1.4 of the Hayward / Goldline AquaRite.
Reply
I have an Aqua logic AQL-P-4 control panel. I need a gold line turbo cell t-15. Is the W3t-15 the same as the Gold line t-15?
Reply
Good day,Based on the information provided yes the Goldline Controls AquaRite Replacement Cell (TCELL15) would be the same as the W3T-CELL-15.
Reply
Confused by the W3T designation of Your Goldline T-cell 15. Will this fit my 10 year old circuit board?
Reply
Good day, Gerard,The W3 stands for WWW online resale code used by the manufacturer. If your board is currently, set for a T-CELL15 the new cell would be a replacement.
Reply
Is the replacement (T-Cell-15 Turbo Cell Goldline) compatible with Hayward's OmniLogic system ... plug and play... or would it also require an updated board?
Reply
Hello Garrett, the TCELL15 would be compatible with the Omni Logic units.
Reply
I replaced the turbo cell because the red no flow light was on and it was not generating. After replacing the cell is did not correct the problem. Any other ideas what could be the problem?
Thank you.
Reply
I would check to see if you have adequate flow, you need at least 11 GPM's of flow. If you seem to have good flow then you may need to replace your flow switch with this AquaRite Flow Switch.
Reply
How do you know if you have adequate flow? If the control unit doesn't flash the flow button, can I assume the flow is good enough?
Reply
11 GPM is very low flow, normally your pump should be pumping at 60 - 100 GPM, if you can feel water coming out of the return jets in the pool then you can assume you have more than 11 GPM of flow.
Reply
I've had a T-15 Hayward cell in operation for 6 years for a 15.5 k gallon pool. Never a sign of build up on the plates. Removed in winter for fear of freeze damage. Just wondering how much longer before it gives out?
Reply
This is a tough question to answer. I am on year 4 of mine, but here in Florida I run my pool year-round. Typically the cells here run 3-5 years. It also will depend how high you are running the cell. 6 years is a good amount of time though.
Reply
I have a mineral springs cell 15 I need to replace. My pool is about 10,000 gallons. Do I need the same cell and do I need to reconfigure it. What cell is best and why can"t I find a Mineral Springs cell? Thank you
Mark
Reply
Hello Mark. For Salt Water Systems sold under the Mineral Springs branding, Hayward Aqua Rite chlorine generating cells are the direct replacements. In general terms, the larger capacity chlorine generating cells have the advantage of running at lower output levels for the desired level of chlorine, increasing their operational life span. For example; the T Cell 15 can generate up to 1.47 pounds of chlorine per day at a salinity level of 2900ppm, the T Cell 9 can produce up to 0.98 pounds of chlorine. Replacing your current cell with a W3T-Cell-15 requires no reconfiguration. Some Mineral Springs models do not have the ability to be configured to cells that differ from the original size. Please check with the manufacturer (Hayward) for compatibility.
Reply
I HAVE A 10,000 GALLON POOL WHAT T-CELL IS BEST FOR MY SIZE POOL?
Reply
We would suggest this TCELL15 as it will last the longest and if you really need to crank up the chlorine for whatever reason then you can do so with this cell.
Reply
I have a Goldline T-cell 15 that works with our Aqua Plus system. The cell is 7 years old and won't stay calibrated any longer. Is the Aquarite Tcell-15 the correct replacement cell for our system?
Reply
Hi Donna,Yes the W3T-CELL-15 is the correct replacement for the Goldline T-CELL-15. Hayward bought Goldline a few years ago.
Reply
Is this AquaRite Replacement Cell (TCELL15) - W3T-CELL-15 compatible with my 2006 AQUA RITE Electronic Chlorine Generator / Goldline Controls, Inc. running firmware r1.40? My pool is a 30K Gal. in-ground.
My second question is: Can my panel firmware be updated? Or what do I need to do to run a later version firmware (r1.5+)
-W3T-CELL-15.jpeg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-W3T-CELL-15.jpeg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Hayward AquaRite Replacement T-CELL-15, 40,000 Gal Pool, TurboCell, Model W3T-CELL-15")
This is the correct replacement cell for your TCELL15. I do not know of a way to update the firmware of this unit. You might contact Hayward to see if they have anything, but I have not heard of anyone being successful in updating their firmware.
Reply
Who is providing the 3 year limited warranty? Does Hayward recognize this product under their warranty support?
Reply
Hayward is providing the 3 year warranty and they recognize this product under their warranty support.
Reply
Is this T-15 “plug and play” with my Blue Essence SWG? I have revision r 1.59.
If so, is this item ready to ship? Thanks!
-W3T-CELL-15-36affec4-38f0-4536-9666-a56b934cd2e8.jpeg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-W3T-CELL-15-36affec4-38f0-4536-9666-a56b934cd2e8.jpeg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Hayward AquaRite Replacement T-CELL-15, 40,000 Gal Pool, TurboCell, Model W3T-CELL-15")
Hi Jeff, this AquaRite Replacement Cell (TCELL15) - W3T-CELL-15 is compatible with the software version in your Blue Essence SWG and should be "plug and play", though you need to reset the average salt level (see page 11 of this guide for instructions) whenever a salt cell is replaced. Be sure that your generator is set to the correct cell size (see page 10 of this guide on how to reset it if necessary). It is currently in stock and ready to ship.
Reply
Is this cell compatible with my Aqua Logic AQL-P-4 Automation Controller Main Software revision 2.87?
Reply
Hello Steven. The Hayward Pool Products AquaRite Replacement Cell (TCell15) is compatible with the Hayward AquaLogic AQL-P-4 Automation System, software revision 2.87. Attached please find a copy of the AQL-P-4 Operation Manual. Please reference page 14, Configuration Menu Items, Section: Cell Type T-Cell-15. Operation Manual for model AQL-P-4
Reply
Hello, what is difference between W3T-CELL-15 and Hayward TCELL940? Thanks!
Reply
Hello. The Hayward Pool Products AquaRite W3T-CELL-15 has a 3 Year Warranty period. The Hayward Pool Products TCELL940 has a 4 Year Warranty period. Both the W3T-CELL-15 and the TCELL940 are capable of generating 1.47 pounds of chlorine per day according to Hayward.
Reply
Hello,
My Salt Cell might be dying. It's been 5 years almost to the month since I replaced the last one. I tested the water with a test kit and it reads 2900, but the cell is reading 2500 and flashing. I have an Aquarite system T-15. The control box reads r1.59. I believe that is the revision of the firmware?
Is this the correct replacement and is there another way to definitively test the cell to make sure it needs replacement?
Thanks,
Greg
Reply
Hello Greg. A 400 PPM salt reading discrepancy between an independent test and the Hayward Control Box reading is not unusual. The Inspect Cell and Check Salt lights should both be flashing indicating the system is reading a salinity level below 2700 PPM. The target salinity level for the AquaRite SWG is 3200 PPM. Please review the attached Troubleshooting Guide and follow the appropriate steps for Cleaning the Cell, Resetting the Average Salt Reading, and Salt Addition Chart. Troubleshooting Guide Please review the attached Quick Reference Guide for additional troubleshooting. Quick Reference Guide A local retailer may be equipped with Hayward Salt Cell Diagnostic Equipment.
Reply
Hi, is this cell my only option to replace the t-cell15 I have with my Goldline Aqua Plus controller? (units pictured)
Hello J. The Hayward Aqua Plus Automation System should have the capability to accommodate several T-Cell sizes. Attached please find a copy of the Aqua Plus Operation Manual Please note Section - Configuration Menu Items, Cell Type Selection, page 16. Following this procedure will identify the available T-Cell Selections compatible with your Aqua Plus Automation. A complete listing of the available Hayward Replacement SWG Cells can be found here Hayward Chlorine Generator Replacement Cells
Reply
I have a Hayward Aqua Plus that is about 6 years old, the salt cell is on it way out. There is a T- Cell-15 in there now. My pool is only 15000 gallons and I would like to replace it with a T- cell-9. Is that possible and can i change the programing myself.
Reply
Hello Robert. Attached please find the Aqua-Rite Troubleshooting Guide and Aqua-Rite Quick Reference Guide Please reference the Quick Reference Guide, Section: Display Readings, #7 - Main Circuit Board Revision. Please identify your Aqua-Rite current Main Circuit Board Revision. Next, please reference the Troubleshooting Guide, page 40, Software Revision: Cell Compatibility Chart. A T-Cell-9 is compatible with Aqua-Rite Software Revision 1.50 or later. Following, please reference the Quick Reference Guide, Section: Change Cell Size. If your Aqua-Rite Main Circuit Board Revision is compatible with the T-Cell-9 the programming procedure is DIY.
Reply
I have a Hayward Aqua Plus Automation running software revision 4.45 and need to replace my Hayward T-cell 15. What Hayward and generic cell is compatible?
Reply
Hello, because you use automation, we do not carry a generic or aftermarket salt cell that would be compatible with your system; however, you would be able to use Hayward AquaRite Replacement T-CELL-15, 40,000 Gal Pool, TurboCell, Model W3T-CELL-15 as a replacement cell with your Aqua Plus.
Reply
Hello,
My salt cell needs replacing. My current cell is a Hayward Goldline Turbocell TCell940. I can't find that cell and I suspect that it has been discontinued and replaced with the Hayward TurboCell T-CELL-15. Can you verify that the T15 is Hayward's replacement for the 940? Thank You.
You can use the W3T-CELL-15 to replace the T-CELL-940.
Reply
-W3T-CELL-15.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-W3T-CELL-15-bd0cecf3-f10f-4138-b55a-084534c07ad2.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-W3T-CELL-15.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Hayward AquaRite Replacement T-CELL-15, 40,000 Gal Pool, TurboCell, Model W3T-CELL-15")
-W3T-CELL-15-bd0cecf3-f10f-4138-b55a-084534c07ad2.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Hayward AquaRite Replacement T-CELL-15, 40,000 Gal Pool, TurboCell, Model W3T-CELL-15")