1. Home
  2. Pool Parts
  3. Salt Pool Systems
  4. Hayward AquaRite S3 Salt System
  5. 2807-38

$42.43

Qty:
 ADD TO CART

By Pureline

Details

Top

Part # 2807-38

Manufacturer Code GLX-FLO-RP

Dimensions 5" L x 2.5" W x 3" D

Alternate Part #'s GLX-FLO-RP, GLXFLORP, PL7102, Q-12DS-C2/2/4L(HAST C)/NO/15FT(24/2)/AMP5-641335-3, Q12DSC2/2/4L(HAST C)/NO/15FT(24/2)/AMP56413353NOT

Product Description

Aftermarket Compatible Replacement Flow Switch with 15' of cable for AquaRite™ GLX-FLO-RP.

This Flow Switch is not the Hayward™ original Flow Switch and is an After-Market generic Flow Switch by Pureline

This is the flow switch only and No T is included.

This flow switch is compatible with the following systems:

  • Hayward™ Aqualogic™ 
  • AquaRite™
  • AquaTrol™

*Inyo Pools is not affiliated with Hayward® Industries Inc. The use of such trademarks herein is for informational purposes only, and the goods are not those of Hayward® Industries Inc, but rather they are simply compatible with the referenced Hayward® product.

Top
Ask A Question

?     Asked on 5/27/2009by Guest

Does this part have the "telephone cord type" of connection to plug into the controller?
 Reply

A  Answered on 5/27/2009 by InyoPools Product Specialist Patrick P.

Yes this does have the telephone stlyle connection.
 Reply


?     Asked on 10/31/2012by Guest

How can I test the flow switch to see if it is still working?
 Reply

A  Answered on 10/31/2012 by InyoPools Product Specialist Patrick P.

With the pump off, you can unthread the flow switch from the tee and press the two metal tabs together. If the flow indicator on the control panel is off when then two pieces are pressed together and red when they are apart, the flow switch is working.
 Reply


?     Asked on 8/19/2015by John OBrien

I have an aquaRite Electronic chlorine generator by Goldline Controls. The chlorine indicator display is 2000 but a test of the water indicated content @4000. Clould this ba a faulty flow switch?
 Reply

A  Answered on 8/20/2015 by InyoPools Product Specialist Joe S.

Hello John, No the flow switch will not have  any affect of salt reading it simply a flow sensor. Attached is a how to troubleshoot your system
 Reply


?     Asked on 5/8/2016by steve

what does plug in end look like? is it like a telephone plug in end?
 Reply

A  Answered on 5/11/2016 by InyoPools Product Specialist Lennox H.

Hi Steve, This Flow Switch cable does have a end like a telephone line.
 Reply


?     Asked on 7/8/2016by Antonio

Flow switch model q12ds-c2, how can I verify no flow reading is indicating? No cell is bad just wanted to verify as replacing new cell just received from you guys.
 Reply

A  Answered on 7/13/2016 by InyoPools Product Specialist Lennox H.

Hi Antonio, The No Flow indicator on the controller will illuminate when the system detects no water flow.
 Reply



Read all Q&A’s
Top
Write A DIY Story
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Adjustable Wrench

No flow light

Written on 11/19/2023 by Guest

Called InyoPools and explained problem. They recommended a flow switch and I opted for the Pureline switch. Super fast shipping and super easy installation.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Adjustable Wrench, Teflonn tap

1     0

Flow switch failed.

Written on 7/30/2023 by Guest

Researched the DIY section on the InyoPools website. Located the exact replacement part I needed. Watched the video on how to replace it while it shipped. It arrived 2 days after I ordered and it took about 5 minutes to make the repair and the salt system is happy again and the pool looks great.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Pliers

1     0

The check salt light was on and the inspect cell light was on my salt generator.

Written on 8/2/2022 by Guest

I used INYOs instruction info and shorted the flow switch contacts together with a screwdriver after removing the the line from the flow switch, which verified that the flow switch was bad. I replaced the switch following INYO's instructions after a quick delivery of a replacement from them and everything is working again.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Adjustable Wrench

2     0

NO flow

Written on 6/1/2020 by Guest

Unscrew switch and replace. Very simple.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.85  out of 5 stars)
19 Rating
(53%) 10 of 19 customer would recommend this product to a friend.
5 star:
 
(17)
4 star:
 
(1)
3 star:
 
(1)
2 star:
 
(0)
1 star:
 
(0)
Write A Review

The Most Helpful Review

2     0

 (5 out of 5 stars)  

Reviewed By:  Inyo Customer ()

So very easy to install. It took all of 10 minutes max and solved the no flow issue.


Was this review helpful to you? 
 

The Most Recent Reviews

1     0

 (5 out of 5 stars)  Quick delivery and quick repair.

Reviewed By:  Inyo Customer ()

Instructions were easy to follow. the kit included both teflon tape for threads and an extra tube fitting in case yours is damaged.


Was this review helpful to you? 
 

1     0

 (5 out of 5 stars)  

Reviewed By:  Inyo Customer ()

Easy to install and works fine.


Was this review helpful to you? 
 

1     0

 (5 out of 5 stars)  Took 2 minutes to install

Reviewed By:  Inyo Customer ()

Plug and play, took 2 mins to install


Was this review helpful to you? 
 

1     0

 (5 out of 5 stars)  Perfect replacement part

Reviewed By:  David ()

Pros: Worked as designed

Perfect replacement part for a decade old Naturesoft (Goldline) flow switch.


Was this review helpful to you? 
 

1     0

 (3 out of 5 stars)  Flow Switch

Reviewed By:  Steven L. ()

Pros: included Teflon tape on threads

Cons: expensive

Works perfect.


Was this review helpful to you? 
 

1     0

 (5 out of 5 stars)  Perfect Fix

Reviewed By:  Tony G. from Marietta, GA ()

Pros: Easy swap out

Cons: Cord is a bit long

30% Cheaper than what my local pool store wanted to charge me (and that was before shipping) I was a bit intimated,at first, but it's a simple, simple install. If you live in an area where your pool will go below 50' in the winter, I'd suggest keeping the "broken" Flow Switch and put it back in during the winter. Saving the new flow switch only for when the water is above 50'


Was this review helpful to you? 
 

1     0

 (5 out of 5 stars)  

Reviewed By:  William e K. from ocean view, DE ()

simple installation corrected problem immediately


Was this review helpful to you? 
 

Write A Review
Read All Reviews