$238.21
By Maytronics
Part # 9995861-ASSY
60' Cable, with Swivel and 2 wires. You will need to order a 9991279 Retrofit Kit separately to build the motor plug on this ASSY Cable
Maytronics Robotic Cables are currently designated as ASSY (Assembly) or DIY (Do It Yourself) depending on the design of the plug on the motor end of the cable. For most of the older Robotic models, the cord was installed through the small hole in the SIDE panel of the cleaner. The opening on the side was too small for the cord to go through with the plug on the end, so the wires needed to be threaded through the opening first and then attached to a separate plug with a Retrofit Kit before being connected to the motor. These cables with “assembled” plugs are designated as “ASSY” at the end of the cable’s manufacturing code.
To improve the plug design, Maytronics created a molded plug that was permanently attached to the motor end of the cable. Instead of coming through the small hole in the side, the cable entered through the TOP of the cleaner and was simply plugged into the top of the motor. Because this cable design was much simpler to install, it was designated as “DIY” for Do It Yourself at the end of the cable’s manufacturing code.
Other differences between the Robotic cables include: the length of the cable; whether they have a swivel; their type of protective spring (DIY cables only); and whether they have 2 wires or three. For more information on these cables descriptions, see our guide on “How to Select the Right Maytronics Dolphin Cleaner Replacement Cable”.
Used on the following Maytronics Dolphin Robotic Pool Cleaners:
Is this part only the cable 18 Meters long and the swivel assembly only without the end connectors?
Reply
Hello John, The 9995861-ASSY 18M Cable CABLE+SWV ASSY 18M DIAG and Swivel with Amphenol Plug on one side and raw wires on the other.
Reply
I have a dolphin nautilus. My dog chewed through the cable approximately half the length. Is this the replacement for that? How difficult is it To replace this part if I decide to do it?
Reply
Hi, his is the correct cable for the Maytronics Dolphin Nautilus cleaner. It's not too difficult to install the cable, it is considered a DIY part.
Reply
I have a triton with the cord coming through the top. My model is 3 years old. Does the cord come with the fittings on both ends? Does it require a dealer to repair or can I do it myself? I am handy.
Reply
Cable 9995861-ASSY is not correct. You want to buy either a 9995872-DIY or a 9995873-DIY cable depending on the type of spring on the motor end of the cable. If your current cable has a metal spring, you want the 9995872-DIY cable. If it has a rubber spring, you want the 9995873-DIY cable. Be aware that both of these cables are listed as –DIY or –ASSY. You want the newer –DIY cable. See our guide on “How to Select the Right Maytronics Dolphin Cleaner Replacement Cable” for more detailed information. These –DIY cables are easy to replace. Take the top off to get at the motor end of the cable. Unscrew the white plug that holds the plug into the motor. Then pull out the plug. When you replace the new plug, it is slotted so there is no question about how it goes in.
Reply
