Part # 4600-1151
Manufacturer Code E-7-S2
Dimensions 7" x 1/8"
Valve cover o-ring used on a number of 2" multiport valves from Pentair, Sta-Rite, Jandy / Zodiac, Jacuzzi and others.
Serves as a seal between the valve cover and valve diffuser.
I need 2 o rings for the model SM20-2 multivalve but I dont see the correct one shown in pictures. The one I need is about 2.5 to 3 inches in diameter and about the thickness of a cooked piece of spaghetti. The ones you have displayed are the slightly smaller and thicker diameter and very wide diameter o ring for the interior of the valve. Please advise.
Regards,
Reed
Reply
Red, The Valve Adapter O-ring (4620-529) that goes on the bulkhead may be what your looking for.
Reply
I have the Purex Triton Model TM-22. I am looking for the o-ring that goes underneath the top of the cover. Will this o-ring work?
Reply
Good Morning Nick Guerra, The model number you gave us is for the multi-port. Is your filter a sand or cartridge and do you have the series or sqft or the model number of the filter itself?
Reply
hi...i need to replace the spyder gasket as well as the o-ring cover for a valve purex triton (filter) model SM-20-3 ....what do you recommend me to buy?? I will need the silicon tube also....
Reply
Good morning Jorge, You are looking for PacFab MPV 2" Tune Up Kit (NO SPRING) - APCK1069
Reply
I have the PENTAIR TOPVALVE Model SM-20-3. I am looking for the o-ring that goes underneath the top of the cover. Will this o-ring work?
Reply
Yes, this is the correct lid o ring for your model valve.
Reply
The Most Helpful Review
2 0
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
perfect fit
Was this review helpful to you?
The Most Recent Reviews
2 0
(4 out of 5 stars) Sand Filter Repair
Reviewed By: Brad from Milwaukee, WI ()
We ordered this replacement part for a sand filter we have. The part was fit on our filter head and stopped a minor leak that we had. This part got us back up and running in short order.
Was this review helpful to you?