Part # 5110-10L
Manufacturer Code SPX3016C
Dimensions 4.85" X 0.6"
Impeller 2.0 THP - SPX3016C
Hayward Super II Pump 1990-Current
I have a 1.5 hp a.o. smith and I want to replace the impeller 2610c with a 3016c. Is that acceptable?
Reply
Hello, those two impellers are not compatible; they fit two different pump series. The SP2610C fits the Hayward Super Pump and the SP3016C fits the Hayward Super II
Reply
4 years ago I ordered a B2979 2-speed pump motor. I have been getting a lot of turbulence and noise from the pump. Took it apart and see the impeller I have is a sp3016-C. This seems like it may be undersized for this motor. What is the correct fitting for a B2979.
Reply
The correct unit that will be needed is Impeller / Diffuser / Upgrade Kit - SPX3020CKIT.
Reply
Is there a trick to getting this off?
Reply
Hi, Cricket. The trick is making sure you securely lock the motor shaft, check out Inyo's How To Replace A Pool Pump Impeller guide for removal instructions.
Reply
I changed out this impeller, but my pump is still not getting water flow so motor over heats and shuts down, what could be causing this? the impeller is spinning freely, there is no audible noise from motor.
Reply
Good Morning- It sounds like the pump is not priming sufficiently. Take a look at our helpful video on How To Determine Why a Pool Pump Won't Prime.
Reply
I need to replace the impeller for my Hayward Super 2 (SP3015X20AZ). The one I pulled off is a SP3016-C, but your chart shows that I need a SP3015-C of the SP3015X20AZ. The dimensions on these 2 are very different. If I should switch back to the SP3015-C, it looks like the impeller ring I pulled of mine won't fit, is that correct? Thanks in advance.
Reply
The Most Recent Reviews
(5 out of 5 stars) Impeller replacement for Hayward pump
Reviewed By: Inyo Customer ()
great replacement impeller, rebuilt Hayward pump with this included
Was this review helpful to you?
(5 out of 5 stars) Value for money. Pump runs perfectly now.
Reviewed By: Inyo Customer ()
Just like the original factory installed impeller. Installed with ease.
Was this review helpful to you?
(5 out of 5 stars) Pumping water
Reviewed By: Inyo Customer ()
Easy installation. Took about an hour remove housing etc. I replaced all parts because I had to replace housing so installed all new parts.
Was this review helpful to you?
(5 out of 5 stars) New part fits
Reviewed By: pukhed from Marco Island ()
Pros: Fits
Cons: None
Not much to say except my old one sheared off and this one fits and works. Easy replacement.
Was this review helpful to you?