Part # NL102
Manufacturer Code PNP192XL
Pool Cove 48" Section - Peel N' Place Closed Cell Foam
4" tall, 3" deep, 48" long. The color may be white or blue.
Much easier to install and more dependable than sand coves, Peel & Stick Pool Cove has an adhesive backing for quick, easy installation and will extend the life of your liner for years!
A cove is needed to keep the weight of the water in the pool liner from causing it to balloon out under the bottom of the pool wall. Previously, pool cove had to be hand-built using tons of sand or dirt. Liner failures due to cove washout were all too common. Corrosion occurred rapidly where metal components, at the bottom of the pool, came in contact with moisture in the sand or dirt.
Specifications:
*48" Sections
*Flexible
*Lightweight
*Extends Pool Life
*Installs in Minutes
*Can not be washed out
*Helps prevent corrosion
*Eliminates liner failures due to cove washout
Click on Your Pool Size Below to Save On Complete Cove Packages
# of Cove Strips Needed for Full Set | |
Pool Size | # of Strips Required |
12' Round | 10 |
15' Round | 12 |
18' Round | 14 |
21' Round | 17 |
24' Round | 19 |
27'-28' Round | 22 |
30' Round | 24 |
33' Round | 26 |
12'x16' Oval | 13 |
12'x20' Oval | 14 |
12'x24' Oval | 16 |
15'x24' Oval | 16 |
15'x25' Oval | 17 |
15'x26' Oval | 18 |
15'x30' Oval | 19 |
16'x26' Oval | 18 |
16'x32' Oval | 21 |
18'x33' Oval | 22 |
18'x40' Oval | 26 |
21'x41' Oval | 27 |
When installing the Peel and Stick Pool Cove, do I need to seal it using tape to the Gorilla floor?
Reply
Hi Matt, This cove does have an adhesive strip on the back of the cove which would secure it to the pool wall. No tape or adhesive would be needed on the bottom of the cove to secure to Gorilla floor.
Reply
How do you make the top bead stay in the grove?
Reply
Hello, This How To Guide may help.
Reply
More than 8 hrs
Screwdriver, Nut Drivers, Socket Set
14 0
I was and have replaced the liner but the peal and stick even after cleaning didn't stick.
The pool ordinarily had a dirt cove. Perhaps since the metal was not new cause an issue. I went back to dirt cove. Unfortunately you only have 30 day from order not recipe to return. If anyone wants to buy them they are brand new in the box. I'm trying to think of uses such as wall bumpers for kids or parking stops for cars in a garage.
The Most Helpful Review
21 0
(5 out of 5 stars) A must have product
Reviewed By: engine8 from Boston ()
Pros: easy to use, quick to install
Cons: none that I found
If you are still using sand to build up the sides, this is the product for you. Its sooooo easy to use and it builds the perfect edge for the liner. You don't even have to think about it, just peal of the the protective tape to reveal the sticky back and stick to the side of the pool. It even has a groove cut out for the bottom channel so it seems to be impossible not to get the perfect berm that is so important for the liner to fit properly.
Was this review helpful to you?
The Most Recent Reviews
14 0
(1 out of 5 stars) Much better than sand
Reviewed By: Inyo Customer ()
Much better than sand
Was this review helpful to you?
14 0
(5 out of 5 stars) Easy install
Reviewed By: Inyo Customer ()
Very easy to install. Worked like a charm. I wish I would have used these on the initial install instead of doing a dirt Cove.
Was this review helpful to you?
14 0
(5 out of 5 stars) Made install easier
Reviewed By: Inyo Customer ()
Made install easier.
Was this review helpful to you?
14 0
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Easy to use.
Was this review helpful to you?
14 0
(4 out of 5 stars)
Reviewed By: Inyo Customer ()
So much easier than sand. A little difficulty getting the back to stick on some. Just used tape when needed.
Was this review helpful to you?
14 0
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Perfect replacement part
Was this review helpful to you?
14 0
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
So easy to use - was able to put in fast and i like the fact that the liner isn't touching the bottom of the pool frame
Was this review helpful to you?