?     Asked on 4/12/2015by louise

Is the coving made by Gladon please?
 Reply

A  Answered on 4/13/2015 by InyoPools Product Specialist Robert M.

Hello Louise - The coving is manufactured by Gladon.
 Reply


?     Asked on 5/12/2015by troy

how many do i need for a 24 round pool?
 Reply

A  Answered on 5/12/2015 by InyoPools Product Specialist Lennox H.

Troy, For your 24ft round pool you'll need 19 of the Peel and Stick Pool Cove.
 Reply


?     Asked on 5/26/2015by Matt Riley

When installing the Peel and Stick Pool Cove, do I need to seal it using tape to the Gorilla floor?
 Reply

A  Answered on 5/27/2015 by InyoPools Product Specialist Patrick P.

Hi Matt, This cove does have an adhesive strip on the back of the cove which would secure it to the pool wall. No tape or adhesive would be needed on the bottom of the cove to secure to Gorilla floor.
 Reply


?     Asked on 6/5/2015by Paul

How do you make the top bead stay in the grove?
 Reply

A  Answered on 6/7/2015 by InyoPools Product Specialist Alex V.

Hello, This How To Guide may help.
 Reply


?     Asked on 5/29/2016by Inyo Visitor

Does the cove sit on the pad over the sand or should the pad go on over the cove
 Reply

A  Answered on 5/30/2016 by InyoPools Product Specialist Lennox H.

Hi, The cove is installed once the pad has been put in place.
 Reply


?     Asked on 6/9/2016by david

is 4inches the standard? pool instructions say build a cove 8 inches high
 Reply

A  Answered on 6/19/2016 by InyoPools Product Specialist Alex V.

David, 4" is standard. If you need an 8" cove, you will need to build the cove out of sand.
 Reply


?     Asked on 6/27/2016by Chez

If the cove is 48" long, shouldn't I only need 4-48" pieces for a 16' round pool?
 Reply

A  Answered on 6/28/2016 by InyoPools Product Specialist Alan M.

The dimensional information of the 16' Round pool is based on a measurement of the diameter of the pool. Since the circumference of the pool is much larger, you will need 13 of the pool coves for your size pool.
 Reply


?     Asked on 7/20/2016by Inyo Visitor

If order pool cove tonight, can i get by Saturday?
 Reply

A  Answered on 7/21/2016 by InyoPools Product Specialist Alan M.

The pool cove is only available for standard ground shipping. It is not available for any expedited shipping including next day air.
 Reply


?     Asked on 8/1/2016by Inyo Visitor

I have an 18' x 33' pool. How much of the peel and stick pool cove will I need and how much will that cost.
 Reply

A  Answered on 8/5/2016 by InyoPools Product Specialist Lennox H.

Hi, You will need 22 of these cove.
 Reply


?     Asked on 3/8/2017by daniel reneau

how much foam pool cove I need for a 12x24 inch oval pool?
 Reply

A  Answered on 3/8/2017 by InyoPools Product Specialist Lennox H.

Hi, Daniel. You will need 16 coves for a 12'x24' pool.
 Reply


?     Asked on 4/17/2017by delivery

What is the delivery price to Russia, Moscow order for 12 round pool?
 Reply

A  Answered on 4/17/2017 by InyoPools Product Specialist Stacey M.

Hello, We would need your address, with zip code and part you want to order (NL102) to give this information to our shipping specialist to draw up a quote with shipping based off where your location is. Any duties, taxes and fees are your responsibility.
 Reply


?     Asked on 5/19/2017by Inyo Visitor

How much cove do I need for my 15×30 oval pool??
 Reply

A  Answered on 5/19/2017 by InyoPools Product Specialist Patrick P.

A 15' x 30' oval will require 19 pieces of cove.
 Reply


?     Asked on 5/21/2017by Scott

When putting pool cove in do you need adhesive? And how many 4 ft pcs for a 18 round?
 Reply

A  Answered on 5/22/2017 by InyoPools Product Specialist Lennox H.

Hi, Scott. You do not need an adhesive for the Peel and Stick Pool Cove, 14 is required for an 18' Round Pool.
 Reply


?     Asked on 5/22/2017by Donna

Would your protect fit a 16 x 24 rectangular pool cove
 Reply

A  Answered on 5/25/2017 by InyoPools Product Specialist Lennox H.

Hi, Donna. These Peel and Stick Pool Cove will fit a 16' x 24' rectangle pool if the liner is not integrated with the pool frame.
 Reply


?     Asked on 5/29/2017by Glenn

How many sections do I need for a 20 foot round pool? (20'x48")
 Reply

A  Answered on 5/29/2017 by InyoPools Product Specialist Patrick P.

Hi Glenn, A 20' round pool will take 17 pieces of cove.
 Reply


?     Asked on 6/9/2017by Inyo Visitor

i'm replacing a liner and I have a sand cove, should I level the sand cove before instaling the new cove?
 Reply

A  Answered on 7/22/2017 by InyoPools Product Specialist Alex V.

hello, Yes, I would recommend leveling the sand before installing the cove. 
 Reply


?     Asked on 5/1/2018by Sandra Banks

How many pieces of cove do I need for a 15 foot above ground pool?
 Reply

A  Answered on 5/1/2018 by InyoPools Product Specialist Hector F.

You would need 12 coves. 
 Reply


?     Asked on 7/30/2018by Janet

How many cove pieces do I need for a 27’ round pool?
 Reply

A  Answered on 7/31/2018 by InyoPools Product Specialist Hector F.

For a 27 foot round pool, you would need 22 coves. 
 Reply


?     Asked on 4/20/2019by Inyo Visitor

I am placing a 15 x 26 pool on concrete, do I need to have a cove?
 Reply

A  Answered on 5/5/2019 by InyoPools Product Specialist Lennox H.

Hi. You can purchase these foam cove or make it using sand.
 Reply


?     Asked on 5/8/2019by Gary

How much for 18x36 oval above ground pool thx
 Reply

A  Answered on 5/8/2019 by InyoPools Product Specialist Joe S.

Hi Gary, for a 18x36 oval  you would need 23 of the NL102.
 Reply


?     Asked on 6/8/2019by Mark Mitchell

How many do I need to order for a 16x24 oval?
 Reply

A  Answered on 6/8/2019 by InyoPools Product Specialist Lennox H.

Hi, Mark. You will need 17 cove for your 16x24 oval pool. 
 Reply


?     Asked on 6/9/2019by Inyo Visitor

do you stick onto pool wall or can you stick to wall insulation
 Reply

A  Answered on 6/11/2019 by Industry Professional

You will want to have the wall foam meet at the top of the cove.
 Reply


?     Asked on 6/16/2019by Laurie

How many do I need for 15x26?
 Reply

A  Answered on 6/16/2019 by InyoPools Product Specialist Lennox H.

Hi, Laurie. You will need a total of 18 Peel and Stick Pool Cove - NL102.
 Reply


?     Asked on 7/16/2019by Todd

how many pcs. of cove do I need on a 21' round pool
 Reply

A  Answered on 7/16/2019 by InyoPools Product Specialist Lennox H.

Hi, Todd. You will need 21 - Peel and Stick Pool Cove - NL102
 Reply


?     Asked on 8/16/2019by Larisa Tilman

Hello I have In-Ground pool with liner and cement on floor, do I need purchase cove for my pool?? Also do I need purchase bottom floor foam for my pool? Thanks.
 Reply

A  Answered on 8/18/2019 by InyoPools Product Specialist Lennox H.

Hi, Larisa. No, you do not. These are only meant to be used in above ground pools. 
 Reply


?     Asked on 10/26/2019by Dan Olson

are the ends of the cove pieces angled to fit the various radius's of different pool diameters, or do the they gaps between the pieces when they are butted together?
 Reply

A  Answered on 10/29/2019 by InyoPools Product Specialist Lennox H.

Hi, Dan. Tape is used to hide the grove caused by attaching two coves together. 
 Reply


?     Asked on 3/23/2020by John A. Heger

How many needed for 24 ft round pool
 Reply

A  Answered on 3/23/2020 by InyoPools Product Specialist Patrick P.

19 are required for a 24' round.
 Reply


?     Asked on 5/6/2021by Jennie Jones

For a 24’x52”do you need just the one cove molding for $19.99? Is the price listed for a 24’ pool?
 Reply

A  Answered on 5/7/2021 by InyoPools Product Specialist Danny R.

You will need to purchase a quantity of 19 of the peel and stick cove to fit in a 24' round pool.
 Reply


?     Asked on 7/10/2021by Jeff Drake

So only ONE cove strip ( 48”) costs $20 each?? And If I need 18 for my pool it would cost me $360???? For simple foam? Ridiculous. Did I get this wrong?
 Reply

A  Answered on 11/5/2021 by InyoPools Product Specialist Megan C.

We will need to review the single pricing, I located the Pool Cove Peel & Stick 48" 22-pack - NL102-20 https://www.inyopools.com/Products/00100016060866.htm 
 Reply


?     Asked on 8/8/2024by Richard H Kemp Jr

The description says it's 4" x 3". Which is the vertical (up) dimension and which is the horizontal (out) dimension?
 Reply

A  Answered on 8/8/2024 by InyoPools Product Specialist Rich N.

Hi Richard, this pool cove is 4" tall (height) and 3" deep.  
 Reply