Do you sell a replacement nut for the Hayward SP727 valve?
Reply
Yes, you can find the nut here: http://www.inyopools.com/Products/07501352027853.htm
Reply
Can this valve be used on a perplex ec75 for an in ground pool. It says on Hayward's site for above ground pools
Reply
Yes this can be used with in ground pools. The Perflex is most commonly (in smaller sizes) used in above ground pools. So I'm sure that's what they were referring to.
Reply
do you need extra parts to install unit or will the unit go on a ec 65 system 3.. looks as if need more fittings and pvc pipe...........
Reply
Bill, It all depends on what you're doing, but extra materials will be required.
Reply
I have a Haywood ec65 with fingers.Is there an upgrade to use a diverter valve instead of the bump to make it easier and clean the fingers better?
Reply
Hi, The "Bump" feature is the only way to backwash the Hayward Perflex filters. The Perflex XStream & Regenx Diverter Valve WG 1.5" (SP0727) is a valve that can be install so that you back vacuum or drain you pool without going through the filter.
Reply
I have a Hayward regenx with a RG70 grid filter but do not have a backwash valve which one should I get?
Thanks.
Reply
Hello Eric, This valve is a diverter valve to bypass the filter, but is not considered a "backwash" valve. The backwash feature on DE/Sand filters removes the dirty water from the tank and expels it through a waste line. This valve would screw into the discharge side of your pump and you can have the handle turned so the return water goes through your filter or you can turn the valve in the opposite direction so the dirty water goes to waste and bypasses your filter.
Reply
I have a Hayward regenx with a RG70 grid filter but do not have a backwash valve which one should I get?
Thanks.
Reply
Hello Eric, This valve is a diverter valve to bypass the filter, but is not considered a "backwash" valve. The backwash feature on DE/Sand filters removes the dirty water from the tank and expels it through a waste line. This valve would screw into the discharge side of your pump and you can have the handle turned so the return water goes through your filter or you can turn the valve in the opposite direction so the dirty water goes to waste and bypasses your filter.
Reply
Will this valve work on the Hayward 40 Sq. Ft. Filter W/ 1 HP Pump? Would I need anything else to install it on this pump filter system? Does it connect between the pump and filter?
Reply
Hi, Ann. The valve can be used with the C4001575XES pump and filter. You can replace this valve with the union connector that comes with the system.
Reply
.jpeg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
.jpeg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Hayward PERFLEX, XStream & Regenx DIVERTER VALVE WG 1.5\" (SP0727)")