Part # PL7101
Dimensions 3" x 5-5/8"
This Display board is not the Hayward™ original Display Board and is an After-Market generic PCB Board by Pureline
Aftermarket Compatible Replacement Display Board for AquaRite™ GLX-PCB-DSP
Inyo Pools now offers an affordable compatible replacement PC Display board for the Hayward AquaRite™ GLX-PCB-DSP. The board cuts back on price but not performance.
This Display PC board is a compatible replacement for your original Hayward Goldline™ Aquarite™ Display PC board. It is guaranteed to be compatible with any Aquarite T-CELL-15™ or T-CELL-9™ system. If you have the T-CELL-5™ or T-CELL-3™ then we suggest the Hayward™ OEM Display Board GLX-PCB-DSP
The AquaRite™ Display PC Board typically fails due to an electrical surge, lightning, or a brownout.
Worried about the installation? Don' be.... Check out how easy it is to replace your Aquarite™ Display PC board by watching our Video on How to replace your AquaRite™ Display PC Board
Compatibility:
***Inyo Pools is not affiliated with Hayward® Industries Inc. The use of such trademarks herein is for informational purposes only, and the goods are not those of Hayward® Industries Inc, but rather they are simply compatible with the referenced Hayward® product. All manufacturers’ names, brand names, trademarks, images, symbols, descriptions, and part numbers are used herein for reference purposes only.
Will this board fit correctly into the Aqua-rite enclosure? There is a review of the product that says that it doesn't fit right.
Reply
Hi. This PureLine Display Board PL7101 will fit the Aqua-Rite controller.
Reply
Had AGUA COLLECTION FROM GOLDLINE CONTROL PANEL NEW INSTALLED 2003. THE SERIAL # 5A0111-001953. DO YOU HAVE A REPLACEMENT ?
Reply
Hi Bob, You would require this AfterMarket AquaRite Main PCB Board PL7100
Reply
I need a replacement for my Aqua Rite, Goldline control display PN: 132604 Rev: F.
I have a 33k pool built in 2005. My old display doesn't show indicators for, Power, Generating, Super Chlorinate, anything. Off switch will not shut off diagnostic display.
This is why I believe I need the above. Can you help me figure out what replacement part is best?
Reply
Hi Chris, This would be the proper display board but the majority of the time we see that the PL7100 Main AquaRite PCB Board is the problem.
Reply
I replaced my main circuit board a couple of months ago and all worked fine after that. Now I am not getting any lights or display. The fuse has been changed . Does this seem to indicate a bad display board?
Reply
Remove and/or reseat DSP board. Pins may be shorted together or not making contact with connector. If pins are good, if voltage is less than 5VDC on pins 2 & 4, replace main board: (GLX-PCB-RITE)
Reply
Less than 1 hr
Screwdriver
Less than 1 hr
None
REMOVED BOARD TESTED SAME, SPOKE TO YOU CUSTOMER SERVICE TEAM MEMBER.
ORDERED NEW AFTERMARKET BOARD,(SAVED MONEY THANKS GUYS) INSTALED AND ALL IS RUNNING WELL.
THANK YOU YOUR CUSTOMER SERVICE IS SECOND TO NONE THAT I HAVE BEEN DEALING WITH OVER THE LAST 10 YEARS, YOU HAVE ME AS A CUSTOMER 10 FOLD.
ROGER/D
The Most Helpful Review
1 1
(3 out of 5 stars) Good alternative
Reviewed By: Doug S. from Lake Charles, La ()
Pros: Cheaper
Cons: Doesn't fit the cover plate exactly right
This board does not fit exactly like the original but will work and is a whole lot cheaper!
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
ANOTHER PRODUCT YOU GUYS SAID, WOULD SAVE ME MONEY BUT WORK JUST LIKE THE OEM UNIT. THANKS YOUR COMMENTS SOLD ME ON THIS BOARD. PUT IT IN THE SYSTEM WORKS JUST LIKE YOU SAID THANKS GUYS ROGER/D
Was this review helpful to you?
1 0
(5 out of 5 stars) good price on replacement parts
Reviewed By: Inyo Customer ()
ordered it as a back up.
Was this review helpful to you?