Part # 2807-110
Manufacturer Code GLX-PCB-HPC-4
Main PCB service part replacement for Automation System Hayward E-Command 4 with AquaConnect Bundle.
Features
Would this board fix the issue of my clock. Clock is not keeping correct time. Or do I need theDisplay Local P-4 & Ps-4 Before Date Codes 0311 - GLX-LOCAL-P-4
Reply
Hi, Ernest. You will need to replace the PCB of the controller.
Reply
My ECommand 4 will not keep proper time.When I reset the time and check the clock setting at a later time it has not changed.
Thanks
PJM
Reply
Hello- You would need to replace the MAIN PCB, E-COMMAND 4 (GLX-PCB-HPC-4).
Reply
I have a Hayward "Ecommand 4 Automation System control panel, Model HPC-4-RC w/wireless antenna and 6 function remote. I have to re-set the clock every day or use the remote to activate the filter/vacuum. I only want to replace the circuit board. Hayward insists their part # for the circuit board is GLX-PCB-HPC-4, but that # consistently refers to the entire panel by distributors. Do you carry the CIRCUIT BOARD ONLY for this Ecommand 4 panel? Help!
Reply
Hello Rob- The GLX-PCB-HPC-4 is the part number for the Main PCB, our part number is 2807-110. That is just the PCB, not the entire panel.
Reply
Does this work with aqua connect?
Reply
Yes, the MAIN PCB, E-COMMAND 4 (GLX-PCB-HPC-4) is compatible with the Aqua Connect Home Network - AQCOHOMENET
Reply
I have hayward model HPC-4-ACT-PC. Will your board 2807-110 be the right replacement for me. (There was no picture for me to compare). Thanks
If so. What is your warranty and return policy?
Reply
Hi, Jim. Yes, this is the correct replacement PCB for your model controller
Reply
Less than 1 hr
Screwdriver, Socket Set
1 0
Actually very easy - Turn off all power to pool (Breakers) remove 2 screws 4 clips and 2 sets of small wire for sensors. Thats it - take a picture of board prior to unhooking or just mark the leads - No problem - save some money very easy
