Part # 5020-093
Manufacturer Code R0479604
Dimensions 4.75" L x 4.75" W x 2.5" D
Your Source for Swimming Pool & Spa Parts - INYOpools.com
will this replace a0130704 or10131104?
Reply
Could you send us a few photos of your pump and motor? Please take a close up shot of the motor label as well as a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
Reply
Less than 1 hr
Screwdriver, Pliers, Wrench Set
Due to some debree my impeller completely snapped off around the part that screws on leaving a perfectly symmetric hole.
1) Shutoff all power breakers to pool pump
2) Remove motor cap in back of motor
3) Disconnect all wires including ground
4) Unscrew wire protector from motor
5) Remove all (6) bolts to remove motor from pump housing
6) Replace impeller backplate
7) Replace bearings and O-ring
8) Reinstall motor to existing pump in reverse order
Less than 1 hr
Screwdriver, Pliers, Socket Set, Adjustable Wrench
