$166.76

Qty:

By Waterway


Details

Top

Part # 4742-014

Manufacturer Code WVD001

Dimensions 16" L x 9.25" W x 23.75" D

Alternate Part #'s SM-20-1, WVD001, WWVD001, WWWVD001, 26-270-1522, WWPWVD001

Product Description

Waterway Multiport Valve 2" FPT (D.E.) - WVD001

Top

?     Asked on 1/31/2012by Guest

I need parts for my filter valve. When I look at the filter parts breakdown, it gives me different choices. How do I know which one is the one I need?
 Reply

A  Answered on 1/31/2012 by InyoPools Product Specialist Patrick P.

In order to locate the correct parts we will need to know the model number of the filter valve. Two identical filters can have two different valves. Typically the valve model will be located on the label of the valve. If there is no model number on the valve, you can try to see if there are any part numbers on the valve itself. Once you've located you valve model you can check out our >Filter Valve Parts.
 Reply


?     Asked on 4/27/2019by Jerry

I have a Crystal Water/Aqua Clean DE filter P/N 570-060 and the existing multiport valve is Model SM20-1. However, it looks just like this multiport valve. Is this the same part?

 Reply

A  Answered on 4/30/2019 by InyoPools Product Specialist Patrick P.

Hi Jerry, yes this would be the proper replacement valve for your Crystal Water/Aqua Clean DE filter P/N 570-060
 Reply


?     Asked on 5/27/2020by Christopher Snyder

Not sure if I need the WVD001 or WVD002. Couldn't find a picture with FPT.
 Reply

A  Answered on 5/27/2020 by InyoPools Product Specialist Patrick P.

The only difference is where the ports on the valve from the pump, if those have internal threads then you need the WVD001 and the pipe just slips in then you will need the WVD002.
 Reply


?     Asked on 5/6/2021by Barbara A Bell

I have a Pentair 27-1141 ( I think this is the model #) multi port valve. Will this one work for me?

 Reply

A  Answered on 5/6/2021 by InyoPools Product Specialist Patrick P.

Could you send us a few photos of your filter to include the filter label which shows the model # of your filter? Also are there any #'s on the valve which start with SM or PP? To supply photos or additional model number information simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
 Reply

  • Commented on 5/7/2021 by Product Owner

    Hello! Here are the additional pics. It looks like the filter is a FNS plus 60. Thanks for the help!

     Reply

    • Commented on 5/7/2021 by InyoPools Product Specialist Patrick P.

      Hi Barbara, Thank You for the photos those are super helpful! You will require this Pentair 261177 FNS Plus Replacement Valve
       Reply

      • Commented on 5/7/2021 by Product Owner

        Thank you!!
         Reply

        • Commented on 5/7/2021 by InyoPools Product Specialist Patrick P.

          You're welcome Barbara, if you ever need help with your pool in the future don't hesitate to reach out to us.
           Reply


?     Asked on 5/23/2021by James Lee

Will this work on a Sta-Rite System 3 D.E. S8D110?

 Reply

A  Answered on 5/23/2021 by InyoPools Product Specialist Patrick P.

Hi James, No this is not the correct replacement valve. You will need this S8D110 2" Replacement Valve
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Saw. To remove old glued in pipes

Broken spring assembly for multi port valve handle

Written on 5/10/2021 by Guest

After replacing multi port valve gasket as a temporary fix, had to purchase new multi port valve through inyopools. Cut off inlet pipes and purchased new 1/12 to 2 inch pipe fittings to reassemble. Easy peasy. Works great!

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
1 Ratings
5 star:
 
(1)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)