By Hayward Pool Products
Part # 2807-42
Manufacturer Code GLX-PL-LOC-PS4
Dimensions 6.5" L x 4.5" W x 1.25" D
Local Display ProLogic PS4 Only - GLX-PL-LOC-PS4
Your Source for Swimming Pool & Spa Parts With 40,000 Parts in Stock - INYOpools.com
All of the buttons quit working on my panel. My preset times still work I just can't operate it manually. Is my circuit board out or can it be something else? It is a Hayward Pro Logic Ps4
Reply
Hi Tommy, It's hard to say because it could be the Display or the PCB. I would recommend troubleshooting your controller with Hayward. You can reach them at 908.355.7995.
Reply
All of the button lights went out on my display panel. its beeping and flashing this "$}e1d1oG" and "enm" My preset times still work I just can't operate it manually. Is my display panel out and can be repaired or will it need to be replaced? It is a Hayward Pro Logic PS-4 If I disconnect it for a minute and reconnect it all of the buttons light up briefly then they all go out and the beeping and flashing starts again.
Reply
Hi, Ben. You can use the Pro Logic Version Diagnostics Manual to find out if the display or the PCB needs to be replaced.
Reply
Can I use this on my Aqua Plus (Pl-Plus) system?
The Pl-Plus has the (GLX-PCB-PRO) G-011049f-1 PCB card but a P4 local display. I want to use PL-PS features but I think the display is limiting that.
Is the G-011049f-1 the Pro board? If so, could I just Upgrade the display to us the PS features?
In fact - the Aqua Plus 16v uses the PS display.
Hi, David. Yes, you will be able to use the Local Display ProLogic PS4 Only - GLX-PL-LOC-PS4 if it's able to fit when the front panel is on.
Reply
Is that a PCB-PRO in the picture. I’m 75% sure it is but I can’t seem to confirm it. (Rather than main).
Reply
David, I will need to see a picture of the entire board, I'm unable to tell from the numbers.
Reply
