Part # 4706P
Manufacturer Code TM-12-A
THIS IS A GENERIC TOP MOUNT THREADED VALVE "V" THREADS, THREAD DIAMETER IS 6" VALVE COLOR IS BLACK "MODEL TM-12" ON LABEL, "TM-12-A" ON BODY ..... USED ON PAC FAB TA30,40,50,60 MADE BEFORE NOV 1, 1991 ORIGINAL VALVE WAS EITHER WHITE OR BROWN ..... WILL REPLACE (PORT ARRANGEMENT MAY VARY) 4706- HAYWARD VALVE (SP-712-2) 4600-1124 PAC FAB VALVE (26-1124) ..... PORT ARRANGEMENT (CLOCKWISE FROM TOP) ALL PORTS ARE 1-1/2" MPT, ARRANGED AS FOLLOWS 1ST SIDE - WASTE PORT WITH SIGHT GLASS 2ND SIDE - NO PORTS 3RD SIDE - PUMP PORT & RETURN PORT (PUMP PORT IS ... OFFSET TO TOP & LEFT OF RETURN PORT) 4TH SIDE - NO PORTS (SIGHT GLASS & THREADED HOLE ... FOR PRESSURE GAUGE ARE LOCATED HERE) ..... VALVE POSTIONS (CLOCKWISE FROM TOP) STARTING ABOVE THE WASTE PORT WASTE, CLOSED, BACKWASH, RECIRC, RINSE, FILTER (WINTERIZE ALSO SHOWN BETWEEN RINSE & FILTER) ..... INCLUDES SIGHT GLASS WITH GASKET 1/4" PLUG INSTALLED IN PRESSURE GAUGE HOLE PRESSURE GAUGE NOT INCLUDED HEIGHT IS ??? (EXCLUDING HANDLE)
Multiport Valve, Praher TM 12-A, 1-1/2"fpt, Fine Thread
I have what looks like a Tagelus TA 50 sand filter, would this be the replacement I need? I took the old one off and it does not tell me any part number or model numbers but it looks to be like a v thread.
Reply
Hi, The Top Mount "V" Thread-Praher (TM-12-A) would be the correct valve for model manufactured prior to Nov. 1991.
Reply
Can I buy the part which includes the lid with the handle and the unit which comes out when you remove the six screws to look inside at the spider gasket...all as one unit?
Reply
Hi, Marvin. Yon can purchase the Valve Top Assy - E-50-S1B. The Diverter Gasket - E12S1 and or the Cover O-ring - E7S1 is not included with the top valve assembly.
Reply
Can I buy the part which includes the lid with the handle and the unit which comes out when you remove the six screws to look inside at the spider gasket...all as one unit? If so what is the price.
Reply
Hi, Marvin. The Top Valve Assy White - E-50-S1 is available as a replacement part.
Reply
The Most Recent Reviews
(5 out of 5 stars) Great Value for the older model sand filters
Reviewed By: Jerry Baby from Benton, MS ()
It is great that you,Inyopools, still stock the TM-12A valve for the older sand filters!
Was this review helpful to you?
(5 out of 5 stars) Perfect Part
Reviewed By: Elaine R. from Tempe, AZ ()
Pros: Perfect
The part is perfect!!! First time ordering and everything works now!! Wish I'd known about INYO sooner. Will make sure I order future parts, but recommend to friends. Great support with Customer Service and instructions. Fair price!!
Was this review helpful to you?
(4 out of 5 stars) Hassle free valve install
Reviewed By: Nathan H. from Carthage, MO ()
Pros: Easy install
Cons: lack of instructions
I received this valve, removed the old one and installed the new without a problem. Removing old one was a bit tough to begin but threads were easy after getting it started. A little cleaning of threads on filter neck & new valve installed easily.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: wally ()
Pros: Perfect match to the original we installed in 1988
10 star
Was this review helpful to you?
(5 out of 5 stars) Great Replacement Part
Reviewed By: Dave from Deerfield, MA ()
Pros: Easy to find correct part and install.
Was this review helpful to you?