Part # 4802-01CP
Manufacturer Code PL0714
Dimensions 9" L x 8" W x 15" D
Is your backwash valve leaking?
Why spend 30% for the Hayward original when you can get an after market valve at the same quality!
This is a replacement top mount backwash valve which is a direct replacement for the Hayward SP0714T & SP711-13 valves as well as the Jacuzzi DVK7 valve.
The Hayward SP0714T & SP711-13 valves are commonly used on the following Hayward Pro Series Sand Filters: S166T, S180T, S210T, S220T, S244T & S270T.
The Jacuzzi DVK7 valve is commonly used on the following Jacuzzi Laser Sand Filters: 160L, 190L, 225L, 250L please note that the Jacuzzi Laser had two style valves a bolt on style and a clamp on style this is the clamp on style. The bolt on style valve is far more common and can be found here Jacuzzi Laser bolt on style valve
Valve does include the pressure gauge.
The handle is hard to turn. Any ideas?
Reply
You may need a new spring or to check the gasket inside. There are also plastic washers under neath the handle that make turning it a little smoother. Those do dry out and crack. This is a parts explosion that shows the pieces - http://www.inyopools.com/pool_parts_multiport_valve_2_models_sp715_sp716.aspx
Reply
This looks like the part I need The only thing I know is that its a Hayward and there's a number on it (27-2599 6/98) If I were to order this from you and it does not fit correctly, Can I send it back for a refund?
Reply
Hi Matt, The part # of 27-2599 is the part # for a label which goes onto a Pac-Fab or Purex Valve and these valves are different than the Hayward valve. Is it possible you could get the name of the filter or model #, this should be located on a label on the side of the filter tank. You could also reply back to our email with photos as this would help us determine the valve you require.
Reply
I have a "Splash Pak SS160" from Jacuzzi Bros sand filter. Is this the correct replacement multiport valve?
Reply
Hi John, Yes this valve is the correct replacement valve for the Splash Pak SS160 from Jacuzzi Bros.
Reply
Where can I purchase the fittings for the three ports of this Valve? I just purchased a new Hayward Sand Filter (SP210 Pro Series) and I need the fittings to hook up the hoses from the pump, the return, and the waste.
Reply
John- For the Hayward Generic Valve For Hayward Sand Filters 4802-01CP you can use a Combo Hose Adapter (SPX1091Z7) 31-150-1030 to screw into the ports of the valve and clamp down your hoses to.
Reply
Less than 1 hr
Screwdriver
3 0
He purchased a new handle and once we opened the pool this year, he attempted to attach the new handle. He is not a handy person and this replacement handle cost half as much as replacing the entire valve. From day one, the leaks we're massive. After a few weeks, I purchased the replacement value from your company. It came quickly. My husband replaced this one piece valve without incident and we have been leak free since!
Less than 1 hr
Screwdriver, Nut Drivers
1 0
The Most Helpful Review
6 0
(1 out of 5 stars) Valve was Leaking
Reviewed By: Inyo Customer ()
Received mine and altho a perfect fit the valve was leaking in 3 places,2 around the top by the handle,and the clear glass inspection tube.Glass tube was an easy fix by just re-tightening by hand.Tightened the 6 bolts on top of the valve but the leaks continued.Contacted customer service and there reply was- "Did you try putting some pool gasket lubricant on it" ....... Really !!! a brand new valve and I am suppose to disassemble it and lube it ? Took the valve to the local pool store and payed the young man $20 to fix it. Customer service's proper reply should have been- Let us send you a new unit and put the defective part in the box and ship back to us.I will go elsewhere next time.
Was this review helpful to you?
The Most Recent Reviews
1 0
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Received in a timely fashion and works as advertised
Was this review helpful to you?
0 2
(4 out of 5 stars) Sand Filter replacement valve
Reviewed By: Inyo Customer ()
Bought as a replacement and have yet to install.
Was this review helpful to you?
2 0
(1 out of 5 stars) Started Leaking
Reviewed By: Inyo Customer ()
Started leaking out of the backwash port after a couple of weeks of using. Had to order new Hayward brand
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Works like a charm
Was this review helpful to you?
1 1
(4 out of 5 stars) Great Product
Reviewed By: William Brent C. from Keystone Heights, FL ()
Pros: Low cost, Excellent performance
Cons: O-ring is slightly large
This is the most economical way to bring new life to your existing sand filter. It fit perfectly for me and has worked great with no signs of wear this whole season. Thanks!
Was this review helpful to you?
4 0
(5 out of 5 stars) Replacement Valve
Reviewed By: R P D. from Willowbrook, IL ()
Pros: Exact fit
Cons: None
Part fit exactly to my existing filter - took no more than 15 minutes to install.
Was this review helpful to you?
3 0
(5 out of 5 stars) Great filter valve
Reviewed By: Jerry D. from Trumann ar ()
Pros: Easy to install
Great product at a reasonable price. Installed very easy Shipped and received very fast too. Exceeded my expectations
Was this review helpful to you?