$19.18
By Waterco
Part # 4640-14C
Manufacturer Code 15B0232
Dimensions 22" L x 0.73" W x 0.73" D
INYO # 4640-14C BAKER # 15B0232 GENERAL DESCRIPTION: THIS IS AN AIR BLEED TUBE ONLY WITH FITTING USED ON THE BAKER HYDRO HRV SIDE MOUNT 36" FILTER THIS INCLUDES THE TUBE AND AN END FITTING. THE END FITTING HAS A COMPRESSION FITTING ON END TO HOLD THE TUBE AND THE OTHER END IS 1/4" MALE PIPE THREADS MATERIAL: CLEAR PLASTIC TUBING WHITE PLASTIC END FITTING
*************************************************************
DIMENSIONS: FITTING THREADS: 1/4" MPT (ABOUT 1/2" ACTUAL DIAMETER) TOTAL LENGTH: TUBE & FITTING" 22-1/2" (MAY VARY JUST A LITTLE) (B) TUBING: OUTSIDE DIAMETER: 5-/16" (A) INSIDE DIAMETER: 3/16" TUBING IS THE SAME SIZE AS STANDARD SLIDE TUBING
*************************************************************
INCLUDES: AIR BLEED TUBE AND END FITTING THE AIR BLEED SCREEN IS NOT INCLUDED
*************************************************************
MARKINGS: THERE ARE NO MARKINGS
What does the vent tube do? Would it cause sand to pass through the filter into the pool?
Reply
The vent tube will help purge the air in the filter & keep it at the top of the filter. It can raise the tank pressure if it is clogged but is not generally the reason for sand back into the pool. That is usually the result of an issue with the laterals being cracked or broken. Would have a few questions, how much sand is being returned, is the vent tube screen still intact?
Reply
