Part # 5223X
Warranty 1 Year
Manufacturer Code B129
CENTURY THREADED SHAFT, 56J FRAME CATALOG # B129 PART # 8-164304-24 ..... HORSEPOWER LABEL HORSEPOWER: 1.5 SERVICE FACTOR: 1.3 EFFECTIVE HORSEPOWER: 1.95 ..... ELECTRICAL VOLTAGE: 115 OR 230 VOLTS, SINGLE PHASE AMP DRAW: 9.2/18.4 9.2 AMPS AT 230 VOLTS, 18.4 AMPS AT 115 VOLTS. ..... DEMINSIONS LENGTH: 11" SHAFT LENGTH: 2 1/2" DIAMETER: 6 1/2" MOUNTING HOLES: (4) 5 7/8" CENTER TO CENTER ..... CAPACITOR RUN CAPACITOR, 25MF, 370 VOLTS *CURRENT MODEL* MOUNTING ON TOP OF MOTOR (OPT# 5270-08) SHIPPING WEIGHT: 32.60 LBS
Note: NOT California or New York Title 20 Compliant.
Dual Speed Option: (Not Compliant)
California and New York Title 20 Compliant Option:
What is Service Factor?
Reply
Service Factor(SF) is a multiplier that when multiplied by the horsepower of the motor indicates the total permissible horsepower loading that may be carried when the motor is operating at rated voltage and frequency. The most important thing to remember when replacing a motor is that the replacement motor's horsepower times its service factor must be equal to or greater than the original motor's horsepower times its service factor. The Service Factor rating can be found on the motor label. See Step 4 of our How to Read a Pool Motor Label guide.
Reply
can you tell me what is the capacitor model number for this motor 10-164304-22
Reply
Jacob,The correct capacitor for motor B129 is part number 628318-307. It's an AO Smith Replacement capacitor, 25MFD 370V.
Reply
I have a motor (part # 7-193633-24) in a Jandy HHP (2005 or older) what model dual speed motor would replace it?
Reply
Hi Rob, The 1.5 HP Full Rate Two Speed Motor W/ Timer - Round Flange (B977T, B2977T) would be the replacement dual speed motor for p/n 7-193633-24.
Reply
I have this motor, however I have a crack somewhere in the Hayward pump but I am unable to find a model number to replace the part. Can you tell me which Hayward pump this motor would sit in? Also since I have this motor is there a better more efficient motor I could replace it with?
Reply
Hi Shannon, We can not identify the pump model off of the motor. If you can send us photos of the pump housing we can identify it that way.
Reply
I have this motor and the impeller brok off at the end of the stem. How do I find the right impeller to replace the impeller?
Reply
Hi Peter there should be a part # embossed into the impeller, if you can find this then just enter the part # into our search box and the impeller should come up. You can also email us a photo of your pump and motor label and that will allow us to determine which impeller you require.
Reply
4 to 8 hrs
Screwdriver, Pliers, Socket Set, Wrench Set, Adjustable Wrench
1 0
We disconnected the old motor and replaced all of the gaskets and pieces from the tune up kit (purchased separately). We also had to purchase new yellow wire tips to connect the electrical to the new motor- taking care to match the connections and voltage setting from the old one. It took us a while, some brute force on the bolts that connect the motor to the seal plate, and some youtube videos, but we got it up and running on the first try.
Less than 1 hr
Screwdriver, Socket Set, Wrench Set
1 0
My pool pump motor suddenly stopped working. I flipped the breaker and turned on motor and smoke came out of the pump. I came to inyopools.com and found the best price on a Century B129 motor. The price was fair, shipping was free and within 3 days the pool pump was running again.
More than 8 hrs
Screwdriver, Nut Drivers, Pliers, Socket Set, Wrench Set, Hammer and nut driver to tighten pool pump ring to stop water leaking
1 0
Turned off electric power, disconnected pool pump from pump motor, removed difuser, removed motor seal, replaced motor seal, reassembled difuser and other components, replaced some seals and a pool pumps assembly gasket, and a gasket inside the pool pump body. Instructions unclear about which seals and gaskets were to be used to replace those in the Magnum Force Pump and motor. Would be helpful for at least minimal instructions or schematics as to where gasket and seals were to be placed.
The Most Recent Reviews
1 0
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Easily swapped out. No leaks or electricitions.
Was this review helpful to you?
1 0
(1 out of 5 stars)
Reviewed By: Inyo Customer ()
Bearings failed after a year. Of course they only offer a one year warranty.
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Worked great
Was this review helpful to you?
1 0
(5 out of 5 stars) Motor replacement
Reviewed By: Inyo Customer ()
great replacement motor, rebuilt Hayward pump with this included
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Quality pump at a great price. On-line help is great also.
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Works great, no leaks, good as new.
Was this review helpful to you?
1 0
(5 out of 5 stars) I really like. It is quiet and runs very well.
Reviewed By: Inyo Customer ()
I really like. It is quiet and runs very well.
Was this review helpful to you?
(5 out of 5 stars) Just what we needed to get our pool ready for the summer!
Reviewed By: Inyo Customer ()
Just what we needed to get our pool ready for the summer!
Was this review helpful to you?
3 1
(5 out of 5 stars) Pool Pump
Reviewed By: Mark P C. from iowa ()
I have purchased many products from the internet, but nothing compares to Inyo Pools. The product came on Time, Site was easy to use, tracking information was readily available, but then something I did not expect. Inyo Pools went out of their way to send: How to install information, Trouble shooting information and additional products that I may be interested in. Most companies just deliver the item, Inyo goes well beyond my expectations. I have owned a pool for 30 years and all of my items will be purchased from there now, Thank you and great work.
Was this review helpful to you?
(5 out of 5 stars) 100% as advertised
Reviewed By: Susan S. from Dallas, TX ()
Pros: How-to Videos; low prices; large inventory
Highly recommend this site for 1) the ease of finding parts; 2) the educational documents/videos; and 3) technical help, if needed. I received and installed this pump motor with no issues. Very satisfied. Additionally, this motor was significantly cheaper than other sites and included the shipping fee. Bonus.
Was this review helpful to you?
(4 out of 5 stars) Pump
Reviewed By: cguz from Folsom, CA ()
Standard replacement for Jandy Stealth. Quiet, but not quite as quiet as original pump
Was this review helpful to you?