$583.00

Qty:

By Century Motors


Details

Top

Part # EVC225

Warranty 18 Months

Alternate Part #'s AOSEVC225, CRMEVC225, EVC225

Product Description

V-Green EVO™ with Century Connect™ Automation Mode to enable communication with many popular automation systems!

Versatility and performance best describe A. O. Smith's new V-Green EVO™ variable speed pump motor with an integrated timer. Capable of delivering superior energy savings of over 80% versus a standard single-speed motor. Spurred by consumer interest in energy-saving products and government-mandated efficiency standards, the innovative V-Green variable speed EVO offers premium efficiency boosted by such features as Power Factor Correction, which raises overall efficiency while reducing input amps! The state-of-art user interface ensures programming ease and flexibility, with on-screen navigation, ergonomic selector switch, and pre-set programs for out-of-the-box operation. A. O. Smith's V-Green EVO  is Title 20** compliant and with three user-defined variable speeds is a superb choice for reducing energy consumption, for lowering overall pool ownership costs, and for satisfying regulatory requirements.  *Requires a Timer or Automation System for the on/off feature, it does not provide full functionality with automation systems. 

Round Flange Hayward Super Pump, Super II Pump & Max-Flo Pumps

Don't Forget Your Tune Up Kit

** California's Title 20 legislation states that pumps > 1HP (total) must be 2-speed or variable speed, and must have control to default to low speed (i.e. timer)

Features:

  • Dual Voltage 230/115 VAC with Automatic Voltage Detection
  • Freeze Protection
  • Sealed Ball Bearings
  • Variable Speed Operation (600-3450 RPM)
  • TEFC Design Rotation: CCWPE
  • Single Phase
  • 50/60 Hz
  • 303 Stainless Steel Shaft
  • Class F Insulation
  • 50°C Ambient

Benefits:

    • Communicates easily with most automation systems leading to no loss of automation system functionality
    • New simplified user interface allows for easier programming and motor setup all with the push of a button
    • Lightweight, compact design, and rotatable mains wiring compartment allow for ease of installation
    • Available in both square flange and C-Face mounting configurations to allow for replacement versatility
    • Water, weather, and UV resistant IPX5 moisture intrusion rating and UV resistant components protect against harsh conditions to extend motor life

  

THP RPM VOLTS AMPS SERVICE FACTORS FLANGE VGREEN EVO™ MOTOR STOCK NUMBER
1.30 600-3450 230/115 8.6/15.6 1.0 Square EVQ130
1.65* 600-3450 230/115 10.5/17.7 1.0 Square EVQ165
2.25* 600-3450 230/115 13.5/17.4 1.0 Square EVQ225
1.30 600-3450 230/115 8.6/15.6 1.0 C-Face EVC130
1.65* 600-3450 230/115 10.5/17.7 1.0 C-Face EVC165
2.25* 600-3450 230/115 13.5/17.4 1.0 C-Face EVC225
*When motor is running at 115VAC the total horsepower is 1.65 THP.

Product Specifications

HP:
2.25 HP
Frame:
56J
Volts:
115/230 V
Speed:
Variable
Amps:
17.4/13.5 amp
Service Factor:
1.0
Total HP:
2.25/1.50 HP
Manufacturer:
Century (A.O. Smith)
Shaft:
Threaded
Flange:
Round
RPM:
600-3450 RPM
Phase:
Single
Height:
8 in.
Length:
12.04 in.
Top

?     Asked on 1/23/2023by Joe Tripodi

Hi, I'm looking to replace my Century UST1102 pool motor with this variable speed type. I believe the 1HP pump is a little under sized. Pool is approximately 30,000 gallons so I'm told. Is this motor a good fit? See Pics attached I also have a Pentair Intelliconnect control. Do you know if this motor is compatible via the RS-485 input? Or should I just control it from the VFD directly? Thanks for the help. Joe

 Reply

A  Answered on 1/24/2023 by InyoPools Product Specialist Rich N.

Hi Joe, all pool motors spin at the same speed (well, the single-speed ones do), so, if you want to improve your pumps performance, you will need a new impeller to match the higher-HP motor.  You will also need to get a Pentair VS pump if you want full control from your automation.  The good news is that the VS motors can be controlled easily on their own.  We would recommend this Hayward Super Pump VS Motor Upgrade Kit.  It has everything you will need.
 Reply


?     Asked on 6/2/2024by Ben

Hi, Can this replace the Century HST225 Model K48AA31A01 pump motor? To replace with this variable speed model, are any other parts needed that I should order?
 Reply

A  Answered on 6/3/2024 by InyoPools Product Specialist Robert M.

The EVC225 would be the correct variable speed motor replacement for the HST225. We'd recommend replacing the pump seals when you replace the motor. The seals will depend on the make and model of your pool pump.
 Reply


Top

Review Summary

 (Average 5  out of 5 stars)
3 Rating
5 star:
 
(3)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews