Part # 5056-09CA
Manufacturer Code C105-138PEB
Dimensions 4.685" X 0.3"
INYO # 5056-09CA PENTAIR/STA-RITE # C105-138PEB
Frequently Bought with this Impeller
Shaft Seal for Seal Plate with Copper Cone 5250-100
Shaft Seal for Seal Plate without Copper Cone 5250-104
Diffuser 5056-10C
************************************************
GENERAL DESCRIPTION: CLOSED FACE IMPELLER. THIS IS A 3/4 HP FULL RATED OR 1 HP UP RATED IMPELLER THIS DOES NOT HAVE A HOLE FOR AN IMPELLER SCREW
************************************************
MATERIAL: LIGHT TAN OR BLACK PLASTIC TYPE: CLOSED OR OPEN FACE CLOSED NUMBER OF VANES: 6
************************************************
DIMENSIONS: OUTSIDE DIAMETER 4-11/16" (A) TOTAL LENGTH: 1-15/16" OUTSIDE THICKNESS AT EDGE: 5/16" (B) INSIDE THICKNESS AT EDGE: 3/16" INLET OPENING OUTSIDE DIAMETER: 1-7/8" INLET OPENING INSIDE DIAMETER: 1-1/2"
************************************************
MARKINGS: "C105-138P" IS PLAINLY MOLDED INTO THE IMPELLER "EB" IS EITHER LIGHTLY MOLDED IN OR WRITTEN ON THE IMPELLER
I am trying to put a GOKIT6 in my Sta-Rite Max-E-Glas (pre 1998)--1 HP, but cannot get the impeller off. Do you know if any tricks? IO could put a rod into the cooling fins on the motor to try and hole it in place, but do not want to break anything. I pulled the back cover off the motor and tried to hole the shaft with a screwdriver, but this is definitely not a good idea.
Help? Thanks.
Reply
Hi, John. Check the impeller to make sure it does not have an impeller screw. It will have to be removed before removing the impeller. Then use a 7/16" wrench to lock the motor shaft in order to remove the impeller. You can also follow the steps in our How To Replace the Motor on Your Pool Pump guide.
Reply
What seal fits this impeller?
Reply
Hi, Tom. Use the complete part listing for Sta-Rite Dura-Glas and Max-E-Glas Pump to locate the correct shaft seal based on seal plate style you have.
Reply
2 to 4 hrs
Screwdriver, Socket Set
The Most Recent Reviews
(5 out of 5 stars) Fits as recommended and works great.
Reviewed By: Inyo Customer ()
Fits as recommended and works great. Thank you staff for your match of the correct product.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Just what my pump needed runs like new
Was this review helpful to you?