Part # 3262-03
Manufacturer Code P15
Dimensions 6" L x 6" W x 1.5" D
INYO # 3262-03 POLARIS # P15 GENERAL DESCRIPTION: THIS IS THE IMPELLER USED ON THE POLARIS PB4-60 BOOSTER PUMP MATERIAL: IMPELLER BODY: BLACK PLASTIC THE FEMALE TREADED PART THE GOES ON THE MOTOR IS BRASS CLOSED FACE OR OPEN IMPELLER: CLOSED FACE NUMBER OF VANES: 5 THE VANE OPENINGS ARE VERY SMALL; ABOUT 3/4" LONG OUTSIDE DIAMETER: 5-7/8" (A) THICKNESS: 7/16" (OUTSIDE THICKNESS AT OUTSIDE EDGE) (B) THICKNESS: 1/8" (INSIDE THICKNESS AT OUTSIDE EDGE) FRONT TO BACK: 1-5/8" INLET INSIDE DIAMETER: 1" INLET OUTSIDE DIAMETER: 1-7/32" THE INLET OPENING EXTENDS ABOUT 3/8" BEYOND THE IMPELLER FACE SHAFT LENGTH: NO SHAFT BUT THE FEMALE THREADED PORTION IS SURROUND BY A BRASS REINFORCED ROUND SECTION WHICH IS 1-5/8" DIAMETER AND EXTENDS ABOUT 9/16" PAST THE IMPELLER FACE MARKINGS: NO MARKINGS
Will this impeller fit a PB625 motor?
Reply
Yes, this impeller will fit a B625 Motor if it installed on a PB460 Booster Pump.
Reply
What causes an impeller to go bad?
Reply
Impellers can fail due to debris, striking its face or improper water chemistry. If your pool has sustained high chlorine levels it may deteriorate the impeller's plastic; this is commonly seen in a pump when the pool owner uses their pump or skimmer basket to hold chlorine tablets.
Reply
Will this impeller fit a Polaris PB4-60 booster pump made in 2018?
.jpeg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
.jpeg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Polaris Zodiac P15 Booster Pump Impeller")
The correct impeller for your PB460 made in 2018 is the Impeller for PB4-60 - R0536400Unfortunately due to the Texas Freeze this impeller is out of stock at the moment. We are expecting a new shipment at the end of May.
Reply
The Most Helpful Review
2 0
(5 out of 5 stars) nice and new
Reviewed By: Richard Z. from Grand Prairie TX. ()
Pros: got it fast
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars) Impeller
Reviewed By: Inyo Customer ()
Easy installation. Have a lot more pump pressure. Old impeller had broken vein, took ten minutes to replace.
Was this review helpful to you?
(3 out of 5 stars)
Reviewed By: Denis M. from Hennessey ok ()
Product is fine, I'm not sure though if it is the correct replacement part. I'm working with your staff now to confirm this.
Was this review helpful to you?
(4 out of 5 stars)
Reviewed By: Charlotte B. from Columbia, SC ()
We have actually not put the new parts on the pump yet, but I was extremely impressed at how quickly the parts came to our home once they were ordered.
Was this review helpful to you?
2 0
(5 out of 5 stars) Exact Match
Reviewed By: Grunzwest from Crandall, TX ()
Pros: Perfect fit
Cons: None
Exactly what I expected. Just don't forget to purchase a new mechanical seal.
Was this review helpful to you?