By Hayward Pool Products
Part # 6220-84
Manufacturer Code IDXLIGN1930
Dimensions 10.5" L x 2.25" W x 3.25" D
INYO # 6220-84 HAYWARD # IDXLIGN1930 GENERAL DESCRIPTION: THIS IS THE HOT SURFACE IGNITOR USED IN THE H SERIES LOW NOX. INCLUDES: IGNITOR AND PLUG MATERIAL: BASIC MATERIAL IS CERAMIC THE HOT SURFACE PORTION IS IN A SOMEWHAT "M" SHAPE THIS IGNITOR HAS A 2 PIN AMP STYLE PLUG IN. THIS IS LOCATED AT THE END OF THE 2 - 5" WIRES WHICH EXTEND FROM THE IGNITOR BODY. LENGTH: ABOUT 9-1/2" (FROM PLUG TO OPPOSITE END) LENGTH: 4-3/8" (NOT INCLUDING WIRES AND PLUG) LENGTH: 2-9/16" ("M" SHAPED HOT SURFACE PORTION ONLY) WIDTH: 2-1/4" FRONT TO BACK: 1" MARKINGS: THERE ARE NO MARKINGS
is this a replacement for the idlign1930 I have an h400idl hayward heater
Reply
Hi Tom, yes this would be the correct part, sometimes Hayward omits the X when they stamp the part numbers on there Parts.
Reply
How would I determine if a new ignitor is likely to be necessary and sufficient to restore normal heater (H400IDL) operation?
Reply
Check for continuity on the two wires that go out to the ignitor it should come back with a reading. It should change from OL or 1 to a number. Meter would be set to the Horseshoe shaped setting on the dial. The one that makes the meter go beep when you touch the two leads together.
Reply
