1. Home
  2. Pool Parts
  3. Filter Valve Parts
  4. Hayward Multiport Variflo XL 1 1/2" SP714T
  5. 4703-22

$14.14

Qty:
 ADD TO CART

Details

Top

Part # 4703-22

Manufacturer Code SPX0714L

Dimensions 5-5/8" ID, 3/16" Cross Section

Alternate Part #'s 5000-4053, O-336, SPX0714L, SPX714L, 90-423-5358, APCO2162, HAYSPX0714L, HPPSPX0714L

Product Description

Cover O-Ring for Hayward SP0714T Valve

Actual Size:  5-5/8" ID, 3/16" Cross Section

This is the Cover O-Ring for the Hayward SP0714T Valve. If you are seeing leaks around the cover of your multiport valve then this cover o-ring is a top culprit. Easy Homeowner Installation!

Frequently Bought with O-rings

Magic Lube O-ring Lubricant

Commonly Use On

  • SP0714T
  • Hayward Pro Series Sand Filters
  • Hayward Top Mount Sand Filters
  • Hayward S166T
  • Hayward S180T
  • Hayward S190T
  • Hayward S210T
  • Hayward S220T
  • Hayward S230T
  • Hayward S244T
  • Hayward S270T
Top
Ask A Question

?     Asked on 5/31/2017by Inyo Visitor

I have a Hayward Chlorinator with a cover that leaks. Perhaps it needs an O ring. Where is the O ring in the cover? Why would the cover be so difficult to turn?
 Reply

A  Answered on 6/8/2017 by InyoPools Product Specialist Lennox H.

Hi. If the o-ring has become stretch or swollen from absorbing water it can make the cover hard to remove. I will need to know the model of the Hayward Chlorinator in order to locate the correct lid o-ring.
 Reply


?     Asked on 6/11/2018by Phil

Is this oring between the filter an the valve bottom
 Reply

A  Answered on 6/12/2018 by InyoPools Product Specialist Hector F.

No, this is actually the o ring under the valve lid itself. 
 Reply


?     Asked on 6/12/2018by Inyo Visitor

The 5 3/4 by 5 3/4 is the right size for the o ring between filter and head valve. Am I correct. On the Hayward Sp714t
 Reply

A  Answered on 6/16/2018 by InyoPools Product Specialist Lennox H.

Hi. The O-ring - GMX600F which is 6-3/4" ID, 7-1/8" OD is the o-ring that goes between the Valve and Filter Tank. This Cover O-ring - SPX0714L is placed inside the valve. 
 Reply


?     Asked on 3/21/2020by Inyo Visitor

could this be a replacement for spx0714 BA?
 Reply

A  Answered on 3/21/2020 by InyoPools Product Specialist Patrick P.

Yes this is the proper cover o-ring replacement used on the spx0714 BA
 Reply


?     Asked on 7/31/2020by MARY. WIMBERLY

NEED AN O RING FOR HAYWARD SAND FILTER --IT HOLDS 350 POUNDS OF SAND AND THE MODEL NUMBER IS S270T --PLEASE HELP
 Reply

A  Answered on 10/26/2020 by InyoPools Product Specialist Hector F.

Hi Mary, so there are a few o rings for the Hayward model S270T sand filter. Please see this parts diagram for your filter to better confirm the o ring that you may need. 
 Reply


Top
Write A DIY Story
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Tweezers or plastic knife

Bi-Annual preventative Maintenance.

Written on 5/1/2021 by Guest

Carefully unscrew counterclockwise your existing pump skimmer lid. Use a pair of tweezers and slide the edge of the tweezers under the old O-ring, lift and rotate the lid as you raise the old O-ring out of its groove. Wash the lid with soap and water to remove any and all debris and algae from the O-ring groove. Use a liberal amount of petroleum jelly and wipe it into the O-ring groove. Take your new O-ring and start it into the groove being careful not to stretch it out. Once you get it started, the jelly will squish out of the groove and the O-ring will slide right into place. Wipe of any excess jelly and your good to go.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

Needed to replace bad valve

Written on 4/12/2020 by Guest

Installed new oring when changing the filter selector valve

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

The old O ring was worn and warped

Written on 6/7/2018 by Guest

I tried to use the old O ring temporarily but I could not get the skimmer to close. So I ordered a new one on Sat. Got via UPS on Wednesday. Put new O ring on and it closed like a top.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
6 Rating
(33%) 2 of 6 customer would recommend this product to a friend.
5 star:
 
(6)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)
Write A Review

The Most Helpful Review

1     0

 (5 out of 5 stars)  Perfect Fit

Reviewed By:  Z.C. from Georgia ()

Pros: Slides on with ease


Was this review helpful to you? 
 

The Most Recent Reviews

 (5 out of 5 stars)  O-Ring replacement

Reviewed By:  Inyo Customer ()

works well with Replacement Upper Handle Assy. for Hayward SP0714T


Was this review helpful to you? 
 

1     0

 (5 out of 5 stars)  Cover O-ring

Reviewed By:  Jeanne Y. from va beach va ()

Works great - no leaking after install


Was this review helpful to you? 
 

Recommended Products