$293.19

Qty:

By Pentair Pool Products


Details

Top

Part # 5055-16

Manufacturer Code C176-59P

Dimensions 12.25" X 10.5"

Alternate Part #'s 351021168, 5055-16, 601228, 788379734947, C176-59P, C17659P, STA-101-8558, STA1018558, PENC17659P

Product Description

Replacement swimming pool pump housing assembly for Sta-Rite Dura-Glas II and Max-E-Glas pumps. This assembly includes the pump housing, lid, o-rings and basket.

Commonly Used On:

  • Sta-Rite Dura-Glas II Pumps
  • Sta-Rite Max-E-Glas II Pumps
Top

?     Asked on 3/29/2015by David Wadanoli

My pump housing is leaking. I can not patch it with epoxy. The plate on the pump reads Model P4EA6E-186L and CODE L026. Is this the correct replacement housing for this pump. I recently replaced the motor and the inside of the pump but now the housing is leaking. IS THIS THE REPLACEMENT PART???
 Reply

A  Answered on 3/30/2015 by InyoPools Product Specialist Brian M.

That model P4E does indeed match up with a Sta-rite Dura-Glas II ans/or a Max-E-Glas II If you click on the blue it will take you to their parts page. But, you are correct that part number 5055-16 is indded the body for the model you have.
 Reply


?     Asked on 12/4/2015by scott

is the suction and discharge of the pump wet end (tank body) 2" ?
 Reply

A  Answered on 12/7/2015 by InyoPools Product Specialist Lennox H.

Hi Scott, The Tank Body (C176-59P) suction and discharge ports is sized for 2" PVC pipes.
 Reply


?     Asked on 6/30/2016by Donald P Percival

i need to replace this housing but the one i need is 1 1/2". i bought a new 2" one and put reducers on it but i found out that where the difuser goes in is a different size on the 2" compared to the 1 1/2". what model do i need.
 Reply

A  Answered on 7/7/2016 by InyoPools Product Specialist Lennox H.

Hi Donald, The Diffuser port inside the housing the same size. You may have to confirm the model of the pump you have to make sure that you ordered the correct part. The Maxi-Glas/ Dura-Glas II pump wasn't available with 1-1/2" ports.
 Reply


?     Asked on 12/1/2016by Inyo Visitor

is this part good replacement for 2 horsepower motor
 Reply

A  Answered on 12/1/2016 by InyoPools Product Specialist Scott W.

It is not going to depend on the motor, it is going to depend on the model of your pump. That pump body is for a Sta-Rite Dura-Glas 2 so if that is what you have then it will fit.
 Reply


?     Asked on 6/3/2017by Jim

is this the correct replacement part for a Sta-rite pump model # P6E6F-207L?
 Reply

A  Answered on 6/4/2017 by InyoPools Product Specialist Hector F.

No, the correct trap assembly is part number 5057-32.
 Reply


Top

Review Summary

 (Average 4.67  out of 5 stars)
3 Rating
5 star:
 
(2)
4 star:
 
(1)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews