By Sta-Rite
Part # 357099Z
Seal Plate Gasket (February 2015-Current) - 357099Z
If I am leaking around the band clamp area, is it obvious that I need a new square gasket seal? I have taken it apart and inspected the gasket. It looks fine.
Reply
Hi Benjamin, it may be the o ring needing to be lubricated, or cleaned of any dirt or debris. It could be the housing is warped or has a hairline crack. It could also be that the clamp is worn not able to tighten any more sealing the pump. It will take inspection of all of this to get a better idea as to what the cause of the leak is.
Reply
I need a gasket for a Sta-rite Max-e Pro. The gasket is 10" inside diameter and flat on the sides that that contact the seal plate and the tank body. Is this the correct Gasket. I don't know not the year this pump was installed. The model # looks like it is P6RA6F-206L. The code looks like it says 1605T
need seal plate o ring for max e pro mfg date 1/28/2016 p/n P6E6F-207L
saw online the o ring is flat
Reply
-357099Z.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-357099Z-b1648453-3aab-4015-87a6-ec2eee697e23.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-357099Z.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Pentair Sta-Rite Seal Plate Gasket, Square Profile, Feb 2015-Current - 357099Z")
-357099Z-b1648453-3aab-4015-87a6-ec2eee697e23.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Pentair Sta-Rite Seal Plate Gasket, Square Profile, Feb 2015-Current - 357099Z")