Part # 1154
Jandy sets the benchmark for valves. For over 30 years Jandy valves have become synonymous with innovation, durability and quality. All Jandy valves pass 18 different quality control checks before leaving the factory.
Our workhorse diverter valve is as tough as the NeverLube, and requires no disassembly for lubrication. It comes with a 1-year warranty and a 20-year track record of proven reliability.
Features:
Click here for more Jandy Valves
I just bought a house with a pool. i'v never had a pool so my question is when the pump comes on automaticaly (it has a timer)what position is the jandy valve supposed to be turned to the main drain or skimmer?
Reply
You can turn the valve so that all the suction is going to the drain at the bottom of the pool, this will suck any dirt or debris on the bottom of the pool through the drain and clean through the filter. If you turn the valve so the suction is going to the skimmer then you will be pulling any leaves or debris off the surface of the pool. You can also set the valve in a half way position so you are pulling from both the skimmer and main drain. I hope this helps.
Reply
Why do the Jandy valves list ID and OD for each valve?
Reply
Each Jandy valve is designed to connect to two different size pipes. For example on a valve shown with ID 1 1/2" and OD 2", a 1 1/2" pipe can be glued inside the port or a 2" pipe can be glued on the outside of the port.
Reply
Can I replace the seal inside the gray valve or would I need to replace the entire thing?
Reply
The 1154 Jandy Gray 3 Way Valve does not have replacement parts so you would need to replace the entire valve. You might want to consider the same size Jandy Neverlube Valve which does have replacement parts available.
Reply
I have this valve installed at my pump. I have a lot of air coming out of the pool jets and it doesn't stop. If I rotate the valve to vacuum and back to skimmer, it clears the air immediately. Do you have any suggestions?
Reply
I would recommend checking the gaskets/o-rings on the valve and pump housing. They may be letting air into the system.
Reply
do they make a repair kit for this valve?
Reply
Hi Roy, There is a Jandy 2/3 Port Valve O-ring Kit. You can find other parts via the Jandy Standard & Never Lube Valve Parts.
Reply
1 to 2 hrs
Sawzall, emory cloth and PVC glue
1 0
Needed to replace pump and motor assembly, Jandy valve was just in front of this assembly so I removed it at the same time.
Cut pump assembly away from piping with Sawzall.
Then cut PVC piping coming from vacuum line and skimmer line.
Installed 2 1-1/2" couplings on each line.
Glued valve to couplings then completed pump installation.
The Most Helpful Review
5 0
(5 out of 5 stars) Jandy Valve
Reviewed By: Krazydoc from Anthony, NM ()
Pros: Eaxctly as described
Cons: None
I needed a replacement for some internal parts and the Inyo Pool price for the ENTIRE valve was less than the total for the indiidual parts!
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars) Jandy Gray 3 Way Valve
Reviewed By: Rafael O. from Laredo Texas ()
Pros: work excellent
Cons: none
Excellent Valve, Never Lube I am Replacing my old valves whit this, because work sensational I Recommend
Was this review helpful to you?
(5 out of 5 stars) Jandy 3 Way Valve
Reviewed By: Leslie S. from Dallas, TX ()
Pros: It works as does inyopools
Cons: None
Works as advertised. Easy to install. it works. Super fast delivery, ordered Monday and it was delivered by 10 am on Thursday. Can't get any better than that
Was this review helpful to you?
(5 out of 5 stars) Jandy valve
Reviewed By: Karla W. from Texas ()
Pros: works perfectly
Cons: none
Was perfect as described and received it very quick
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Catherine C. from Unicoi, TN ()
Quick shipping, excellent product, best prices. Reccommend for all your pool needs.
Was this review helpful to you?
(5 out of 5 stars) Very nice product.
Reviewed By: Carl H. from Davenport, FL ()
Shipping was complete and prompt.
Was this review helpful to you?