By Hayward Pool Products


Details

Top

Part # W3SP2610X15

Warranty 10 Year Warranty On Strainer Housing, 1 Year Warranty on Motor

Alternate Part #'s SP2610X15, HAY-10-1007, HPPW3SP2610X15

Product Description

 

Commonly Replaced Parts (Click on Link to view/purchase):

 The Hayward Super Pump is one of our best-selling pumps.  This is a basic, reliable pump for a single body of water.  It can be used for an in-ground pool or spa, or as a dedicated pump for a waterfall.

Specs:

  • Horse Power = 1.5
  • Voltage = 115/230
  • Pipe Size = 1.5" 

Hayward Super Pump Application:

  • In-ground pools of all types and sizes
  • In-ground spas

Add On Options:

Hayward Super Pump Features:

  • Self-priming (suction lift up to 10' above water level)
  • Swing-aside hand knobs for easy strainer cover removal
  • Clear Lexan strainer cover makes it easy to see when basket needs cleaning
  • Large capacity 110 cubic inch basket
  • Basket has load-extender ribbing to ensure free flow of water
  • All components molded of durable, corrosion-proof PermaGlass XL
  • Heavy-duty, high performance motor for quieter, cooler operation
  • Easy access to all internal parts for servicing

Performance Data  

 

Pump Output (GPM) vs. Total Resistance To Flow (Feet of Head)

Model No. Max Rated

20 ft

30 ft

40 ft

50 ft

60 ft

70 ft

SP2600X5

48

38

23

--

--

--

SP2605X7

61

52

41

25

--

--

SP2607(x10)(EE)

74

64

54

40

13

--

SP2610X15

83

74

64

52

36

-

SP2615X20

122

111

98

84

66

39

SP2621X25

117

108

97

86<

Product Specifications

HP:
1 1/2 HP
Manufacturer:
Hayward
Pool / Spa Type:
Inground
Volts:
115/230 V
Speed:
Single
Amps:
18.6/9.3 amp
Service Factor:
1
Total HP:
1.5 HP
Port Size:
1.5 in.
Pump Model:
Super Pump
Installation:
Residential
Pool Type:
In Ground
Top

?     Asked on 10/10/2010by Guest

Is this pump available with 2" plumbing ports?
 Reply

A  Answered on 10/10/2010 by InyoPools Product Specialist Patrick P.

The Hayward Super Pump does not come with 2" plumbing ports, however the Hayward Super II Pump here does have 2" plumbing ports >http://www.inyopools.com/Products/02201157001155.htm
 Reply


?     Asked on 10/8/2013by Guest

How many hours per day should I run my pump?
 Reply

A  Answered on 10/8/2013 by InyoPools Product Specialist Patrick P.

There are many factors to consider; bather load, gallons of water, pump horsepower, type and size of filter just to name a few. A good guideline is 8-10 hours a day. On the cooler days and early and late season, you can cut the run time down to 4-6 hours because there is usually less swimmers and cooler water requires less chemicals. In peak season, when it is the hottest, raising the run time to 10-12 hours per day will help to keep the pool clean and circulating during it’s time of heaviest use.
 Reply


?     Asked on 9/17/2014by Guest

Hi, can this pump be used with a salt water chlorinator [generator] made in South Africa by Justchlor which requires a salt level of 6000ppm by weight, yes I know most USA systems call for 3500ppm. After 27 months my pump motor bearing is whining badly and I presume the shaft seal has gone, I see Hayward has a kit with a salt shaft seal, do you stock this pump "salt ready" if this is what I need?
 Reply

A  Answered on 9/17/2014 by InyoPools Product Specialist Patrick P.

The SP2610X15 is a 1.5HP 230/115v single speed pump that can be used with salt water pools. The main issue with a higher salt ppm level is that the salt will corrode the rubber seals and any metals that it comes in contact with at a quicker rate. Unfortunately the pump does not come "salt ready". You would have to purchase a salt water tune up kit separately. I recommend changing the shaft seal every season with a salt water pool to prevent shaft seal failure.
 Reply


?     Asked on 4/29/2015by Tom K

The water pressure seems to be week as it exits into the pool. Does the motor lose efficiency over time or maybe the empeler needs to be replaced.
 Reply

A  Answered on 4/30/2015 by InyoPools Product Specialist Brian M.

Motors will run full speed until the day they freeze up and stop. The most likely culprit is the filter. Trying this : if you have a sand or DE filter - put the multiport on re-circulate. If you have a cartridge, remove the element from the tank. Then turn the system on. If this returns the system to its usual power , you know you have to clean, or get new filter media. If that does not help, there could also be debris wrapped around the impeller. You can try to reach it by removing the basket and putting your hand in, or you have to separate the motor from the housing to really get at it.
 Reply


?     Asked on 5/7/2015by Jack

Can I use a 1 1/2 HP motor effectively with a Hayward ec-65 or ec-75 DE filter
 Reply

A  Answered on 5/7/2015 by InyoPools Product Specialist Lennox H.

Jack, With the Hayward 1 1/2 HP Single Speed Super Pump the Hayward EC75A D.E. Filter will be your best option.
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Nut Drivers, Channel Locks and Saws all

1     0

My variable speed pump was loosing it's prime while in service.

Written on 5/28/2020 by Guest

Having owned a Hayward Super Pump in the past. I knew what expect. The installation was quite easy. I reused the 220V power cord because it matched up to the twist lock receptacle I had. The existing unions were old so I purchased new unions from Inyo Pools when I purchased the pump. This allowed me to cut out the pump with a saws all and position the pump where I wanted.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Pliers

2     0

Pump not working

Written on 5/21/2020 by Guest

Removed the old pump (same - Hayward Super Pump 1 1/2 HP single speed) - 15 minutes
Installed new Hayward, since plumbing the same it took about 15 minutes for the install.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Screwdriver, Nut Drivers, Pliers

6     2

Pump motor rusted out

Written on 6/30/2017 by Guest

Removed old pump and motor assembly. Removed wire connection. Installed wire connection on new motor reinstalled assembly connected plumbing lines. Filled pump with water turned on all worked.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.85  out of 5 stars)
32 Rating
5 star:
 
(27)
4 star:
 
(5)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews