Part # CL220
Warranty 1 year warranty
Dimensions 15-5/8" x 8-1/8"
Looking to reduce the time spent on pool maintenance? Tired of that unsightly chlorine dispenser floating in the pool? The CL220 Offline Chlorinator automatically feeds chlorine to your inground pool, working with your existing pump and filter system. Offline installation is a convenient option when replumbing or renovation is not desired. Chlorinator tubing is attached directly to the existing pipe and the returning water flows through the tubing into the chlorinator and back into the pool. Features a simple dial valve which allows you to adjust the chlorine feed rate. Tough ABS thermoplastic body with a long-lasting Viton seal for the lid. Holds 9 lbs of Trichlor tablets or sticks.
Hayward Chlorinator CL220 Features:
Specifications:
Hayward Chlorinator CL220 Flow Ratings: (GPM = Gallons Per Minute)
CL100 - Used with pumps with flow rating of 30-50 GPM
CL200 - Used with pumps with flow rating of 50-80 GPM
CL2002S - Used with pumps with flow rating of 50-90 GPM
CL110 - Used with pumps with flow rating of 30-50 GPM
CL220 - Used with pumps with flow rating of 50-90 GPM
Hayward Chlorinator CL220 Miscellaneous Notes
Note: Chemical feeders should always be installed after a pool heater.
CAUTION: Extreme care must be exercised when adding chemicals to your pool. Concentrated chemicals may react violently if they mix in the chemical feeder, causing a fire or explosion, which may result in PROPERTY DAMAGE, PERSONAL INJURY or DEATH.
CAUTION: Never use any petroleum based lubricants on the cover o-ring. Regular lubrication is necessary to allow for easy cover removal. Use non-petroleum based lubricants such as Jack's No. 327 lube or Ivory bar soap.
Click here for more Hayward Chlorinator
Is there a feedback mechanism that tells the unit the chlorine balance in the pool? Is this a way for me to automate addition of clorine to keep it always at the correct level? Or, just another place to put the tab aside from the the drain basket?
Reply
There is a dial on this unit which has a setting from 1-10 If you set the dial on 1 it will be letting the least amount of chlorine to the pool and if you have it set at 10 this would send the most amount of chlorine to the pool. So you can automate the feed of chlorine to the pool but you will still need to manually test your water. We do not recommend placing tablets in the skimmer basket because this high concentration of chlorine goes directly back to your pump and can cause corrosion to your pool equipment. If you do not go with the automatic chlorinator we would recommend at least going with one of our floating chlorinators so you do not damage your equipment you may view our floating chlorinators here http://www.inyopools.com/chlorinators_floating.aspx
Reply
How do I know if one chlorinator is enough for my pool?
Reply
The Hayward CL200 or CL220 chlorinator will provide enough chlorine for up to 40,000 gallons of water. You would need to calculate the volume of your pool to determine how many chlorinators you would need. For example, if you have 60,000 gallons then you would use two CL200 or CL220 chlorinators.
Reply
What is the difference between an inline and offline chlorinator?
Reply
An inline chlorinator would be plumbed directly inline with the plumbing. For an existing pool, this would mean a section of pipe would need to be cut out to install the chlorinator. An offline chlorinator attaches to existing plumbing by chlorinator tubing (holes would be drilled into existing pipe to attach the tubing.)
Reply
I have a really hard time taking the cap off my chlorinator. Is there a wrench that I can buy?
Reply
If you are having difficulty removing the lid on your Hayward CL200 or CL220, you can the Dura Grip Lid Wrench: http://www.inyopools.com/Products/07501352020738.htm#parts It fits securely on the lid, making removal a breeze.
Reply
Less than 1 hr
Screwdriver, Wrench Set, Adjustable Wrench
Installed per simple included iinstructions. Drilled hole in line after filter and before heater added line to feed chlorinator. Drilled hole in line after the heater and connected to chlorinator to supply chlorine to the pool at a rate that you set. Unscrew top of chlorinator fill
With slo release tabs and you are ready to sit back and have your pool take care of itself.
Less than 1 hr
Pliers
I wanted the exact cholrinator. I wanted to get the new cholrinator to fit in the exact spot. This cholrinator was the exact match. Easy to find and exact. Removed old cholrinator and added the new one. Just unscrewing the old one and added the new one. All replacement parts came with the part which made the replacement super easy.
The Most Helpful Review
4 0
(5 out of 5 stars) Excellent
Reviewed By: Bob B. from Angola, IN ()
Pros: Good reponsiveness
Cons: none
Received in 3 days. Originally ordered the wrong unit, called Customer Service and new unit ordered, RMA provided, and service was excellent.
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars) Thumbs up product and service!
Reviewed By: Inyo Customer ()
Easy to install. Time will tell on durability. Order processing and shipping were flawless. Response from customer service regarding product questions was timely.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Work as advertised
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: David C. ()
Easy to replace for old chlorinator
Was this review helpful to you?
1 0
(5 out of 5 stars) Feed that pool
Reviewed By: Joseph M. ()
This website always has the exact match to the parts I need. I had this exact chlorinated and I wanted the same one. Very easy to find and ready to install. Thank you
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Good No Problems
Was this review helpful to you?
2 0
(5 out of 5 stars) Great clorinator
Reviewed By: Wifi2005 ()
Keeps my pool clear.Great clorinator and would recommend anyone with a pool to get one of these.
Was this review helpful to you?
2 0
(5 out of 5 stars) Great Product
Reviewed By: Martin L. from Ravena, NY ()
Pros: easy installation
very easy to install, about 15 minutes, works great
Was this review helpful to you?