Part # GLXPCBRITE
Warranty 1 Year
Manufacturer Code GLX-PCB-RITE
Dimensions 9" L x 6.5" W x 4" D
We are now carrying an After Market Main PCB for the Hayward AquaRite for $199.99! Click here to view the After Market Hayward AquaRite Main PCB.
Goldline Main Printed Circuit Board (GLX-PCB-RITE)
This is the main printed circuit board for the Goldline Controls Aquarite salt chlorine system. This is the board that typically goes bad if your unit is impacted by an electrical surge (lightning). Works with the Aquarite 15k, 25k and 40k gallon models.
Take a look at our Reviews tab for feedback from customers regarding replacing this board.
Compatibility:
My aqua rite main circuit board has a part #066012c-1 rev c. what is the replacement board?
Reply
This item here (GLXPCBRITE) is backward compatible with all older versions of the Aquarite meaning that it will work on all versions of the Aquarite.
Reply
Are the glx-pcb-main and the glx-pcb-rite the same?
Reply
Allison, The GLX-PCB-RITE is for the AquaRite Salt System and the GLX-PCB-MAIN is for the AquaLogic Automated Control System. The AquRite would be a standard salt system where the AquaLogic is an Automated Control System with a Salt System. This means that the AquaLogic would normally also control equipment like lights, pumps, air blower etc. The control of this equipment is done through a remote control. So if you have the AquaRite you require the GLX-PCB-RITE and if you have an AquaLogic you require the GLX-PCB-MAIN
Reply
Hi, My pool co says my Power Interface Board is out (the capacitor is cracked). If I decide to try to replace the board myself, which part should I order. Here are some names & numbers he read off the panel: Aquarite Generator, 215 - 230, GLC21011 (Goldline Controls), Part# G1-066012E-1 year 2009.
Thanks,
Chris
Reply
Hi Chris this would be the Aquarite PCB board that you require based on the numbers you provided. We have a Video on How To Replace an AquaRite PCB Board which should make things pretty simple for you.
Reply
I have a 2009 Aqua Rite system (PN: G1-066012E-1) that needs to be replaced. Can you tell me what is the replacement board for it?
Thanks!
Reply
Hi Peter, This would be the correct replacement PCB board for your Hayward AquaRite. This is the newest board and is backwards compatible to all older AquaRite units. We have a good Video on How to Replace an AquaRite PCB Board which should make this repair pretty easy.
Reply
1 to 2 hrs
Screwdriver, Pliers, Socket Set
Turn off breaker supplying Hayward Aquarite.
Remove the cover panel. Remove the display card.
Color by color, pull wires from old board and use the spade connectors to attach to the new board.
Reuse the white plastic mounting pins from the old board on the new board.
You have to pinch the pins near the hole they protrude to release the pins locking device.
Reinstall the display card. Install cover panel.
Make sure the Aquarite displays the correct cell (in my case T 15) BEFORE hooking up the cell.
That fixed it. DIY 1.5 hours.
Less than 1 hr
Screwdriver, Needle nose pliers
We took off the front of the panel.
We saw the fuse and although it was not burned out we replaced it. Still the control panel did not light up.
We talked to Hayward and they do not send parts. Their local store only did new installations.
We called Inyopools, gave them the id for the control system. They told us which part to order.
When the part came, we set about replacing it.
We shut off the power. Then we disconnected the cords to the chlorine generating cell itself.
We simply disconnected the small screen and then disconnected the control board.
After taking the old board out, we transferred the plastic pieces that held the small screen to the new board. Snap out and snap in. Holes were easily identified.
We reconnected the wires just like they were connected to the old board.
We carefully reconnected the small screen.
We turned on the power and followed the inclosed directions to set our cell to t3
We reconnected the two cords to the chlorine generator.
The lights came back on and everything worked just fine!
Less than 1 hr
Screwdriver, Nut Drivers
2 0
Took a picture of the board hooked up, unhooked all the wires , removed 2 screws & changed out the board. Installed the new board, put the 2 screws back in, hooked the wires back up according to where they go & remounted the display.
1 to 2 hrs
Nut Drivers, Pliers
I removed the old PCB board and used the old display and it worked great. However, I assumed the jumpers were the same for 120 ACV and so I just connected the board without realizing the jumpers were different. It worked fine but appeared to run hot. Because it was working fine I ignored the hot situation and it burned out my transformer. I ordered another PCB board and transformer and contacted InYo Pools tech representative and he talked me through the correct placement of the jumpers. It is still working fine.
Less than 1 hr
Nut Drivers, Pliers
1 0
1. Removed all wire connections from existing board.
2. Removed display module and standoffs from existing board.
3 Removed mounting screws from bottom of existing board.
4. Installed new board securing with lower mounting screws.
5. Installed standoffs and display module on new board.
6. Connected wiring to new board.following color codes on board.
1 to 2 hrs
Screwdriver, Pliers, Socket Set, Adjustable Wrench
3 0
Everything was working fine, but checked one day and no power or generation lite illuminated but the pump is running. Turned power off and checked the main control unit for any changes but nothing. Turned power back on and both lights came back on but turned off somewhere over a 24 hour period.
Repeated the power off/on cycle and watch the P/G lights which stayed on for about 4 hours then shut off. Double checked all the electrical leads again and cycled the power, more out of not wanting to order a new motherboard and swap the old one out as I have much history with the existing motherboard.
Finally made the decision to get the Hayward Motherborad replacement and followed your video and had it back up and running in two hours. I intentionally took my time and triple checked all the connections to make sure they were correct, otherwise it would have been an hour tops to make the swap. All good and back to normal.
Less than 1 hr
Screwdriver, Nut Drivers, Pliers
Less than 1 hr
Screwdriver
1 0
Electricity Switch OFF
Open the Aqua Rite
Before unplug the main PCB, I took a photograph to leave conections as same as I found them
Unplug the broken main PCB
Plug the new main PCB
Close the Aqua Rite
Switch ON
Restart the Aqua Rite
The Most Helpful Review
9 1
(5 out of 5 stars) Easy Install
Reviewed By: DCDeano from Sutherland, VA ()
Pros: Easy to install
Lightning destroyed my original board. I called INYO Pool Products and it was in stock, they sent it overnight to my home. In less than 10 minutes it was up and running. Very easy to install and I saved money by doing it myself. I originally called the factory, they were rude and not much help. I called INYO Pool Products, they knew what I needed and were more than helpful. I am completely happy now.
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
perfect replacement
Was this review helpful to you?
(5 out of 5 stars) Replacement part works great!
Reviewed By: Inyo Customer ()
Affordable replacement and works great.
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
This one takes a little skill, there is some electrical work swapping wires, and you will also have to carefully swap the display board.
Was this review helpful to you?
(1 out of 5 stars) Didn't last one year. Thankfully it is under the one year warranty.
Reviewed By: Inyo Customer ()
Didn't last one year. Thankfully it is under the one year warranty.
Was this review helpful to you?
(5 out of 5 stars) OEM part .. shipped fast and worked perfectly
Reviewed By: Inyo Customer ()
Fast shippng and worked perfectly
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
fast service
Was this review helpful to you?
(5 out of 5 stars) Fixed my AquaRite Issue
Reviewed By: Inyo Customer ()
Solved my problem.Easy to install.
Was this review helpful to you?