Product Description

Features: 100% Waterproof Built in rechargeable batteries (charging station included) can operate while charging Floats Horizontally Color LCD Display for Convenient Night-time Viewing Full Functional Control of Pool, Spa and Other Outdoor Features Multiple Heater and Chlorination Controls Program Macro/Group Functions Light Dimming Control when available Dual Equipment Capable Similar User Interface to ProLogic and AquaPlus Controls (no learning of new interface)

Note: Must be used with a Wireless Antenna (AQL2-BASE-RF) which installs directly onto the side of the ProLogic, AquaPlus or OnCommand main control unit at the equipment pad and communicates with all other wireless accessories. Only one wireless base required per system. ProLogic or AquaPlus (Rev. 2.6 or higher software). Hayward AQL2-POD2

• Easy to operate
• 100% Waterproof and floats horizontally
• Built-in rechargeable batteries; charging station included
• Full functional control of pool, spa and other outdoor features
• Backlit display for convenient nighttime viewing
• Remotely programs and controls Aqua Logic
• Multiple heater and chlorination controls
• Programmable group functions
• Operates while charging
• Upgradable software, dual equipment capable
• System Off button for added safety
• 3 programmable ”Soft Keys”
• Light dimming control on incandescent lights (requires dimmer relay)
• Simple menu navigation – no scrolling through long lists
• Functions with multiple Goldline Controls wired and wireless remotes
• Built-in battery – no compromise to waterproof seal
• Software Version 2.6 or higher is needed for this remote

Aqua Pod 2.0 Specifications:
Range- Up to 500 ft.
LCD Display- Backlit for easy night viewing
LCD Display- Indications Battery life, range, water and air temperature, date, time
Size- 2.43” W x 7.75” H x 1.14” D (3.29” display area width)
Weight- 0.50 lb.
Battery Life- Minimum of 500 charge/discharge cycles
Battery Life Before Charging- 400 commands or button presses
Battery Conserve- Goes into sleep mode 1 minute after last button press
Standardization- ETL

Charger Specifications:
Size- 4.0” W x 3.25” H x 4.13” D
Weight- 0.65 lb.
Power- Plugs into any standard 2-prong AC outlet
Charge Time- 6-7 hours (the unit can be used while charging)

Review Summary