Part # GOKIT20
Tune Up Kit American Ultra Flow & Bronze Pump - GOKIT20
INYOpools highly recommends replacing the shaft seal, o-rings and gaskets when replacing your motor, if you use your old shaft seal it will not mate up properly with the new pump and may leak. The best value is to go with one of INYO's tune up kits which include the shaft seal and all O-rings, gaskets and lubricant for your pump.
This Tune Up Kit Works on These Pumps:
Tune Up Kit Includes:
For More Pool Pump Motors
I recently changed my pool motor and gaskets. I made sure to lubricate all the gaskets with vaseline. A few days later water is leaking from the pump. What did I do wrong? Help please!!
Reply
You never want to use vaseline on any rubber gaskets or o-rings. Vaseline is petroleum based and will deteriorate the rubber quickly. Whenever you change the motor on a pool pump it is recommended that you replace the gaskets and shaft seal as well. A >Go-kit contains the shaft seal, packet of non-petroleum based lubricant and gaskets you will need for your pump. If you already have the gaskets, you can purchase >Magic Lube.
Reply
My pump is not priming even after cleaning impeller. Will purchasing this kit aid in fixing that problem?
Reply
The seal kit can help with loss of prime. I can't guarantee that it will solve your problem. The loss of prime could be from an air leak at the valves or plumbing in front of the pump.
Reply
We have an American Products #38438200 pump and I'll be ordering a new motor. I'd also like to get a tune up kit and wanted to confirm that this is the correct one for our pump. Thanks.
Reply
Hi Dave, Yes this is the correct Tune Up Kit for the American Products #38438200 Ultra Flo pump.
Reply
I'm replacing the motor with p/n ECM16SQU and a GOKIT. The Pump is model # 38468400 American Ultra-flo. Is this the correct one?
Reply
Yes, that would be the correct seal kit for your Ultra Flo and that variable speed motor would be a good replacement for that pump. You will just want to make sure that your impeller is going to be the correct size for the new motor. Also, if you are going up in horsepower with that motor, you will want to make sure that your filter will be able to handle the increase flow rate that the extra horsepower will be putting out. If you need any further help let me know.
Reply
The usual tags on the pump have faded over the years. I THINK I can make out model # 38448200. The motor went out yesterday and I need the parts to do the R & R. Will this kit do the job?
Reply
Based on the 38448200 part # you have an Ultra Flow pump and this tune up kit would be the proper kit for you.
Reply
The Most Recent Reviews
(5 out of 5 stars) Great replacement parts
Reviewed By: Inyo Customer ()
Great replacement parts.
Was this review helpful to you?
(5 out of 5 stars) Easy installation
Reviewed By: Inyo Customer ()
Fast shipping easy to install
Was this review helpful to you?
(5 out of 5 stars) Excellent.
Reviewed By: Inyo Customer ()
Everything fit perfectly. There was no second guessing.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
All the gaskets I needed to stop my suction leaks
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
All the stuff you need all in one kit. The best!
Was this review helpful to you?
(5 out of 5 stars) tune up kit
Reviewed By: Jim D. from wesley chapel, fl ()
This is perfect for older, hard to find seals and O-rings.Local pool stores have no idea how to find these items. Thank you!
Was this review helpful to you?
(2 out of 5 stars) Go Kit 20
Reviewed By: Robert Y. from Friendswood, Tx ()
Pros: 4 out of 5 ain't bad
Cons: Seal plate gasket
Everything in seal kit fit except the large o-ring for the seal plate. That o-ring was for a much larger seal plate. I had to reuse my old o-ring. I was not happy about that !!!
Was this review helpful to you?