By Century Motors
Part # EVQ130
Warranty 18 Months
V-Green EVO™ with Century Connect™ Automation Mode to enable communication with many popular automation systems!
Versatility and performance best describe A. O. Smith's new V-Green EVO™ variable speed pump motor with an integrated timer. Capable of delivering superior energy savings of over 80% versus a standard single-speed motor. Spurred by consumer interest in energy-saving products and government-mandated efficiency standards, the innovative V-Green variable speed EVO offers premium efficiency boosted by such features as Power Factor Correction, which raises overall efficiency while reducing input amps! The state-of-art user interface ensures programming ease and flexibility, with on-screen navigation, ergonomic selector switch, and pre-set programs for out-of-the-box operation. A. O. Smith's V-Green EVO is Title 20** compliant and with three user-defined variable speeds is a superb choice for reducing energy consumption, for lowering overall pool ownership costs, and for satisfying regulatory requirements.
Square Flange Pentair, Pac-Fab, WhisperFlo, Challenger, Sta-Rite, Dura-Glas, Max-E-Glas, & Max-E-Pro Pumps
Don't Forget Your Tune Up Kit
** California's Title 20 legislation states that pumps > 1HP (total) must be 2-speed or variable speed, and must have control to default to low speed (i.e. timer)
Features:
Benefits:
THP | RPM | VOLTS | AMPS | SERVICE FACTORS | FLANGE | VGREEN EVO™ MOTOR STOCK NUMBER |
1.30 | 600-3450 | 230/115 | 8.6/15.6 | 1.0 | Square | EVQ130 |
1.65* | 600-3450 | 230/115 | 10.5/17.7 | 1.0 | Square | EVQ165 |
2.25* | 600-3450 | 230/115 | 13.5/17.4 | 1.0 | Square | EVQ225 |
1.30 | 600-3450 | 230/115 | 8.6/15.6 | 1.0 | C-Face | EVC130 |
1.65* | 600-3450 | 230/115 | 10.5/17.7 | 1.0 | C-Face | EVC165 |
2.25* | 600-3450 | 230/115 | 13.5/17.4 | 1.0 | C-Face | EVC225 |
*When motor is running at 115VAC the total horsepower is 1.65 THP. |
I'm looking for a replacement for a Pentair/Sta-Rite DYNA-PRO MPRA6F-206L with the A100FLL motor. Is the evq130 a bolt on replacement with perfect fit? IS there something else you would recommend? I would need the rebuild parts like the shaft seal etc for the DYNA-PRO but you don't seem to have a kit just for that pump. My current motor is making a high whining noise and is starting to rust through. This is for a waterfall, so I'm looking at variable speed since default 3500 is too much.
Reply
Hi Karl, the EVQ130 is not quite enough horsepower for your Dyna-Pro 1.5 HP STD EE Up Rate Pump - MPRA6F-206L pump but the EVQ165 or (better yet, due to the more flexible programming for your waterfall) the ECM16SQU would be a great choice. A new motor shaft seal, seal plate o-ring, and a diffuser o-ring will get you back up and running leak-free. Be sure to put a little lubricant on the o-rings to help them seal up perfectly.
Reply