Part # 5250-102
Manufacturer Code PS-201
Dimensions 0.83" X 1.49"
This is a replacement pump motor shaft seal that is used on a number of different spa and pool pumps. Some brands and models include the American Products Americana, Sta-Rite Dura-Glas II and Max-E-Glas II, Jacuzzi Magnum, Pentair / Pac fab Hydropump, and Astral 2000 as well as many others. A complete list of pumps that use the PS201 seal can be found under the "Parts" tab above.
Click Here if you would like to purchase the heavy-duty shaft seal. The heavy-duty shaft seal is recommended for saltwater pools but can be used in any application.
Frequently Bought with this Shaft Seal
How do I change the shaft seal on my pool pump?
Reply
Changing the shaft seal is quite simple. Here's How To Replace a Pool Motor Shaft Seal.
Reply
Which side goes where when I replace this 201 shaft seal?
Reply
When replacing this 201 shaft seal as well as others you need to put the spring side on or against the impeller with the dark ceramic side out and then the other half of the seal inside the pump seal plate with the white ceramic side facing out. Please be advised not to touch, wet, or dirty any of the ceramic parts for it very well may compromise the seal.
Reply
IIs this the correct seal for purex aquatron pump?
Reply
Hi Fred, No this not the correct seal for the Purex Aquatron Pump, you would need this Purex Aquatron Pump Seal.
Reply
I bought this along with a motor. I have setup watching your diff videos. It is a JWPA Sta-Rite pump. After hooking everything up and turning it on, there is water coming from the backside of the impeller so the seal is failing. I did have a VERY hard time getting the seal onto the impeller and I'm not sure the spring is actually able to move properly. Should I lubricate the impeller to help slide on the seal, and if so, with what (not the seal itself, but the impeller to help slide on).
Reply
Brian, Lubricating the shaft/inside of the impeller with a silicone lubricant where the shaft seal goes will make it easier to install the seal. You may need to install a new shaft seal since its leaking.
Reply
How to get pump separated from motor, I have a motor model s48874a03 and pump model jwpas5f-2a4
Reply
While this video and instructions are not for your exact pump, it still covers all the steps needed to remove a motor. Please click "How to Replace the Motor on Your Pool Pump"
Reply
Less than 1 hr
Screwdriver, Socket Set
2 0
I never replce a pool pump motor. This was very easy to replace the seal. 4 screws pump comes out. Allen wrench a 22mm to losen the bolt on the shaft. Use a screwdriver to take the seal out press the new one in. Put it back. Done. 30 min job at most.
The Most Helpful Review
5 0
(5 out of 5 stars) Just the part I needed to stop the leak!
Reviewed By: CJsGirl from Galesburg, IL ()
Pros: Super fast shipping and lowest prices
Cons: None!
I replaced this seal on my pump last week and it stopped the slow drip leak problem I was having. Inyo shipped it out to me very quickly and I had it on my doorstep within 3 days and at a great price too (along with free shipping)! Will definately buy parts from them again.
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Seal worked and just what was expected
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Good price. Easy to replace. Keeps water out of my pump. Keeps pump dry. Happy customer.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Perfect fit
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Donald T. ()
Worked just like it was supposed t. Easy to install.
Was this review helpful to you?
(5 out of 5 stars) Perfect Seal
Reviewed By: Krysta L. from Houston, TX ()
Pros: Works
Cons: should have top or bottom markings just take pictures of old one
Less expensive than brand name. Works perfect
Was this review helpful to you?
1 0
(5 out of 5 stars) Pump Seal
Reviewed By: Daves from Corona, CA ()
Pros: It worked
Cons: None
Worked perfect! my pump no longer leaks and it saved my the great expense of replacing the pump.
Was this review helpful to you?
1 0
(5 out of 5 stars) pump seal
Reviewed By: Joe T. from St.Louis, Mo ()
perfect replacement seal. Had no problem with installation at all.
Was this review helpful to you?