Part # ECM16CU
Warranty 18 Months
Century ECM16CU Details:
Variable Speed V-Green 165 Pool Pump Replacement Motor
The V-Green 165 variable speed motor joins a growing Century lineup of premium efficiency ECM replacement pump motors. Fully featured, the V-Green 165 incorporates durable TEFC construction with ECM technology to deliver premium energy efficiency from 40 percent to 80 percent versus a standard single speed motor. Now energy conscious pool owners have an affordable replacement pump motor option that delivers the performance they demand with the programming flexibility they desire.
The V-Green 165 offers three variable speeds programmable from 600 to 3450 RPM, allowing users to easily identify and set the appropriate speeds to minimize energy consumption and lower the overall cost of pool ownership all while maintaining the proper pool environment. Pool size, the presence of additional water features, chemical maintenance needs, and environmental factors will impact the equation with every pool having unique requirements. The programming flexibility offered by the V-Green 165 makes it possible for pool owners to easily identify and adjust speed and duration settings necessary to maintain their pools and to maximize energy savings.
Available in both square flange and C-face configurations, the highly versatile V-Green 165 motor can be utilized in pool pump applications ranging from 1/2 to 1.65 total horsepower. Installation on most pumps regardless of manufacturer is as simple as replacing a standard single speed motor, with no additional wiring or plumbing required thanks to the V-Green motor’s integrated user interface. Equipped with digital inputs, the V-Green 165 motor is even compatible with third party pool automation systems.
Round Flange Hayward Super Pump, Super II Pump & Max-Flo Pump models SP1800X & SP2800X, Not compatible with the Hayward Northstar pool pump
Don't Forget Your Tune Up Kit
Hayward Super Pump Tune Up Kit
Hayward Super II Tune Up Kit
Hayward Max-Flo Tune Up Kit
Jacuzzi Magnum Tune Up Kit
Motor Features
Note: NOT California or New York Title 20 Compliant.
California and New York Title 20 Compliant Option:
I just purchased a v-green 165 motor. The instructions for the 270 are very clear on how to wire it to my SWG so it will only come on at a set time with a set flow rate. I do not see this info for the 165 controller. Any suggestions? My current controller is all analog. I guess I could wire my SWG on a separate timer, but I would prefer to set it up like described on the 270 (direct from the controller on the motor)
Reply
Hello Ken - The 165 does not have the auxiliary like the 270. We spoke with the Century rep and he said the best thing you can do is just wire the 165 and your SWG to the timer. That way they will both come on and turn off at the same time. The 165 will still hold it's programming (bubble memory) so it will run in the set speed when it does turn on.
Reply
I have a Hayward 1hp pump now that just froze up on me. Can I use this 1.65 hp pump? Mine is a 56J frame with a round face.
Reply
Hi Dennis, Yes this would be the correct replacement for your Hayward 1 HP 56J frame and I think you would be really happy with this motor. I would also suggest a Pump Tune Up Kit when replacing your motor.
Reply
I have a hydramax II 1.5 hp motor.Can I assume the ECM65CU round flange will give equivalent performance or better at 1.65 hp
Reply
Jim, You can expect the same performance at 3450 rpm's . Anything lower will reduce the watwer flow thus the energy savings.
Reply
how to reset the speeds on the ECM16CU motor
Reply
The V-Green 165 user interface has a “Reset to Factory Defaults” feature to restore the schedule settings back to the original values programmed at the factory. The user must press and hold the STOP and OVERRIDE buttons for three (3) seconds to reset the settings back to factory defaults. All of the UI bar graph LED’s will flash three (3) times to confirm the settings were restored to factory defaults
Reply
Less than 1 hr
Screwdriver, Socket Set, Wrench Set, Adjustable Wrench
3 0
I noticed a major jump in the motor noise and suspected a bearing was starting to fail. Without disconnecting the power, I disconnected the motor from the pump. I inspected the pump for debris and found none. I then I switched on the motor to confirm the source of the noise. It was the motor. I was just going to buy a new pump, but they were not available. I ordered a new motor. When it arrived, I made sure the power was disconnected at the breaker and removed the pump and replaced the motor reconnected the pump and power and no more noise.
Less than 1 hr
Screwdriver, Pliers
4 0
I bought a Vgreen 165 pump motor to replace a 270 motor that went bad and wanted to use the user interface on the 165. The description says it is compatible but I couldn’t find any instructions on how to install.
So here’s how I did it;
I bought 10 feet of 4 conductor 22 gauge wire
Cut to length need to reach mounting board near motor.
Couldn’t find a routing path on the motor for the wire so I drilled a hole in one of the wiring plugs the size of the wire.
Attached the wire to the existing plug for the interface
Mounted the user interface on board near motor
Fed wire through plug on motor
Attached wires to plug
Plugged into Jack on motor.
Replaced cover
Less than 1 hr
Screwdriver, Socket Set
5 0
2 to 4 hrs
Screwdriver, Nut Drivers, Pliers, Socket Set, Wrench Set, 5/16th Allen wrench
5 0
I researched replacement motors and decided to upgrade to a Variable Speed motor. Several reasons for this one of them is obviously the environmental aspect. But it's the back story that you need to understand as to how I got to where I was. After my pool was about 5 years old I started getting algae and I was spending a lot of money on algae killing chemicals but not of them worked very well, seldom completely got rid of the algae. Finally after going to several local pool stores and discussing the history of algae in my pool I was asked howe many hours a day do I run the pool filter... which at the time was 12 hours a day. They told me to run the filter (motor) 24 hours a day... I did and I have had no algae problems since. Although, yes my utility bill went up, that cost was not as much as I was spending on algae killing chemicals... so the trade off was worth it. With the variable speed motor I am able to run the filtration (motor) 24 hours a day but at reduced RMPs I save a great deal on the electrical utility bill. SO now I have the best of both worlds a sanitary pool and a lower utility bill by not running a 1 HP pump motor 24 hours a day. There are other benefits to the variable speed motors but this is the bug one from my perspective I think I will recover the added cost of a Variable Speed motor in one season (up Northeast pool is only open mid-May to mid-Sept. or 4 months) I figure I'll save about $50 a month on electric bill, the variable speed motor was @ $200 more than 1-for-1 repalcement of the former 1 HP single speed motor.
1 to 2 hrs
Nut Drivers, Socket Set
6 0
R & R pump with the new V-Green 1.65 HP and based on the specifications it was compatible with third party controls.
The new V-Green 1.65 HP worked fantastically alone but would not communicate with my Hayward Omni Logic controller.
The new Century motor was identical to the existing Hayward unit.
I R & R the old drive with the new drive and the unit communicated with the Omni Logic with the correct HUA.
Apparently Century manufactures the drive for Hayward since the case/housing is identical.
I also saw your you tube video that bearings could not be replaced on a ECM/VS motor.
The bearings are much easier to replace on an ECM motor versus a PSC motor.
So I have a back up motor with new bearings.
I also have a new Century V-Green 1.65 DRIVE that is not needed.
Hope this may help any future customers with a similar situation.
1 to 2 hrs
Screwdriver, Socket Set, allen wrench
4 0
I have replaced a motor on my Hayward Superpump once before (a different variable speed motor, 8 years ago), so I felt fairly confident in doing it again with the V-Green motor. I followed the replacement steps outlined on INYOpools.com, here: http://www.inyopools.com/HowToPage/how-to-install-a-variable-speed-v-green-165-pool-motor.aspx They covered most everything, though I wish the step-by-step directions were in a more printable form.
Since I had an older pump and motor, I had to deal with with removing parts that had been in place for a long time. Right after I got the old motor, impeller, and diffuser assembly removed, a thunderstorm blew up and I had to head indoors. That actually worked out for the best, as I was able to remove the impeller from the old motor and reassemble everything inside in a nice clean workspace. There are more steps than you might expect, but nothing is really challenging. The shaft seal was fairly stuck on the old motor shaft, but I was able to pry the remaining piece off the shaft with a flat-blade screwdriver. I also had to do some clean-up when I replaced the seals, but nothing serious or unexpected.
Once the storm had passed, I was able to resume outside. The whole new motor assembly mounted easily back on my SuperPump. As usual, most of the "cussing" on this job was wrestling the electrical wires into place. It was nothing unusual or unexpected, though. Once everything was done, I flipped the power back on, filled the pump chamber with water, and the new motor took right off on the first try.
I am really enjoying the energy savings on this new motor, even compared to our previous variable-speed motor. There are lots of options to fine-tune the motor speed and run-times, and I really like having the Overrride option for vacuuming. On lower speeds, the motor is really whisper quiet. Overall, I am very pleased with it.
Less than 1 hr
Screwdriver, Pliers, Socket Set, Wrench Set
3 0
My motor electronics died (due to my own faulty installation) and I needed a new lump. I’d been seeing your reviews and videos for a couple of years and decided to give you a try. And boy was I happy to find out that you were in my own backyard in Florida.
That meant super fast shipping and I had my new motor in only a couple of days. Since I was replacing the old motor with the exact same new motor - installation was a breeze. I just opened up YouTube, followed the instructions and in no time - my pump was back running exactly the way it should.
I pulled off the old motor, removed electrical connection, and that was the hardest part since my wires were really tight.
I did the whole thing in reverse, added new rings, lined everything, reconnected electrical, programmed the motor. Perfect and easy install. I couldn’t be happier. Oh yeah - the price was great too!!
4 to 8 hrs
Screwdriver, Socket Set, Adjustable Wrench
3 1
I replaced the pump motor with an identical V-green 165 since I was quite happy with it. I used the step by step instructions in INYO site. Only questions were about connecting power as the instructions say connect black to one terminal number and red to the other one, however the picture shows the opposite.
When installing the white impeller ring in the Hayward super 2 pump I noticed that it fits loosely, perhaps because the impeller is old and it wore out. I wonder if it is needed at all.
Now I need to find and fix the housing leak...
1 to 2 hrs
Screwdriver, Nut Drivers, Socket Set, Wrench Set, Adjustable Wrench
6 0
Hello All,
Replacing the motor is a must to save money over buying a new pump all together. It is fairly easy for the mechanically savvy.
Turn off the power! Remove the back cover and disconnect the power leads. ***If you are not comfortable working with electricity, then STOP now! You should have an electrician or pool repair company do this repair!
There are 4 bolts on the motor mount that will need to be removed to release the motor from the pump housing. Then you can remove the motor from housing. You will need a 7/16 on the motor shaft on one end and then unscrew the impeller off the other end. You will then find that there are 4 more bolts holding the motor mount to the face of the motor.
I had to soak my bolts in PB Blaster overnight they were stuck pretty good. Once I was able to remove them, I used anti-seize paste when I reinstalled them into the new motor.
The one trick is making sure to install a new shaft seal, or you will have a leaky pump. Take care not to touch that with your dirty fingers. I use the paper that comes in the box to press the seal in place.
Everything goes back together in reverse order of taking apart :) wink. Further, there are lots of Youtube videos that you can watch for a more detail step by step.
Less than 1 hr
Screwdriver, Socket Set
4 1
We had severe thunderstorms and my pump motor took the hit from a power surge. So after doing some research and finding out that I can't just replace it with a simple replacement motor since I live in California and need a 2 speed or variable speed motor. This was my only option to replace that was at least affordable since the pump is only 5 years old and the seals were just replaced at the beginning of the summer.
Removing the old motor was simple, just remove the four bolts then remove the impeller and the rest of the housing. All pieces went back on in reverse order from how they came off and was really easy going back on. I did have a few issues trying to get the programming to stay, but did a factory default reset and seems to be working pretty well and the motor is really quiet.
1 to 2 hrs
Screwdriver, Socket Set
5 0
No problems installing. I did have to find a YouTube video to figure out how to disassemble the Hayward super pump that I had. It was actually very easy. The V green 165 does come with a user manual, but it doesn't tell you anything about installation. The Way the V green 165 was packaged, almost seemed like it's strictly for professionals in the industry who know what they're doing. But like I said, I was able to find a YouTube video and it went right in with no problems. The pump is super quiet, and I like the flexibility of the variable speed. I'm just now figuring out a week later how to tweak the different settings. The only thing I don't like about it, is I can't use it with my Intermatic timer, because when the timer switches on, it doesn't turn the pool pump on. I wish there was a built-in timer within the pump, but I guess that's why you need to buy the interface. All in all, I'm extremely happy with my purchase.
The Most Recent Reviews
3 0
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Worked for a bout 3 years
Was this review helpful to you?
3 0
(2 out of 5 stars) Won’t fool me again
Reviewed By: Inyo Customer ()
I love this motor when it works but my second one in five years is on the fritz. The first lasted three swim seasons and the second is now failing after two. Noisy, leaky bearings. Even used the salt water seal kit from INYO. Time to look for other options.
Was this review helpful to you?
3 0
(4 out of 5 stars) Reduce energy while keeping algae at bay
Reviewed By: Inyo Customer ()
I purchased this variable speed motor to reduce my energy consumption but also run the pump 24 hours a day. Running the pump 24 hours a day is key to keeping algae from growing/getting started. I discovered this after spending lots of $ on chemicals to try to get rid of algae that formed in the pool. Once I began running the pump 24 hours a day my Algae problems which had plagued my pool for years... and always at the worst time (just before guest coming to swim, etc.). With a variable speed motor I continue to disperse the chemicals in the pool (mostly the chlorine via an automated feeder) but have kept my electric bills down. So this has been a win-win for me. One issue I have with this motor is the control panel is right on top of the motor... with my pool installation the main valve is directly above the motor making access to the control panel nearly impossible, as it is covered by a weather/rain protective lid on a hinge. I am able to tip the rain cover lid up just enough to reach the "Stop" and "Start" buttons which are the primary needs once the variable speeds & times are set, but any other function requires that I remove a lid screw and remove the lid. I don't know if my pool setup with the motor directly under the the pool multi-valve is common, I suspect it is, and therefore a redesign of the motor control panel access lid or location would be extremely beneficial to the consumer.
Was this review helpful to you?
5 0
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
I switched from a single speed motor to this one. Not only does it work faster it is super quiet compared to the other one. It is easy to use and decreased my power bill. I have used it for at least a year and it is just as good as when I first installed it.
Was this review helpful to you?
4 0
(4 out of 5 stars) Great customer service if you have a problem
Reviewed By: Inyo Customer ()
I ordered this motor but after 14 months of use it started making an internal clicking and grinding noise. Eventually the motor stopped working. The motor was still under the original 18 month warranty period. I was prepared for a fight from INYOPools and expected them to resist honoring the warranty. I could not have been more wrong. They told me exactly what they needed from me to honor warranty (via a video on their website). I sent the requested information and after approximately 3 days they shipped a new motor. Excellent responses from their customer service folks and I would do business with them again. The new motor is working a advertised.
Was this review helpful to you?
3 0
(2 out of 5 stars)
Reviewed By: Inyo Customer ()
Died with in 2.5 months of use just like the other one I bought.
Was this review helpful to you?
3 0
(4 out of 5 stars) Awesome, efficient pump (with a minor flaw)
Reviewed By: Inyo Customer ()
This pump has paid for itself in one season. Quiet, efficient...very good. Would give 5 stars, but the control pad cover hinge broke not even 4 months after installation. I'm hoping the part is replaceable.
Was this review helpful to you?
2 0
(3 out of 5 stars) Nice but disappointing
Reviewed By: Inyo Customer ()
Love this pump for its features but just a year old and bearings starting to make noise probably won’t last six more months. Disappointed for this price motor
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Very quiet and easy to hook up.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Much better motor than the single speed it replaced.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Motor is awesome. Why did I wait so long
Was this review helpful to you?
(3 out of 5 stars) Not like a Hayward, but OK
Reviewed By: Inyo Customer ()
It's OK and works, but it's not like Hayward.
Was this review helpful to you?
4 0
(2 out of 5 stars) Temporary fix
Reviewed By: Inyo Customer ()
Pump worked well, but after less than 3 years the digital touchpad stopped working and I was told there is nothing that can be done to replace or repair it so the pump can not be adjusted at all. Not a great pump for any long period of time.
Was this review helpful to you?
1 0
(5 out of 5 stars) Great replacement for single speed motors
Reviewed By: Inyo Customer ()
I used this motor for 4 years and it works great. Easy to program and low noise. I replaced an old fixed speed pump and have noticed a nice difference in electricity. Recently I had to replace it since a pump leak subjected the motor housing and electronics to continued exposure to pool water and it corroded. I replaced it with another identical one. I wish it was more resistant to pool water for these cases. INYO installation instructions are very easy to follow. This motor was a much better economic choice than a 2-speed motor plus a new timer, and I get better efficiency. I connected it to a Hayward super 2 pump.
Was this review helpful to you?
(5 out of 5 stars) Much quieter than my single speed motor
Reviewed By: Inyo Customer ()
Great Motor. So much quieter than my old single speed motor. Also has a fan which seems to keep motor cooler. Have not had it long enough yet to see if it has an impact on my electric bill.
Was this review helpful to you?
(4 out of 5 stars) Nice pump
Reviewed By: Inyo Customer ()
Nice pump. A little louder than I thought it would be.
Was this review helpful to you?
1 0
(5 out of 5 stars) Best variable speed motor for the money!
Reviewed By: Inyo Customer ()
Great motor if your wanting to upgrade this is perfect has built in digital timer and has add on option for WiFi. Fan cooled also helps in Alabama!
Was this review helpful to you?
1 0
(5 out of 5 stars) Do it. You will not regret switching to this vs motor.
Reviewed By: Inyo Customer ()
So far have saver around $35 - $40 a month with this motor. Very easy to install and set up. All from watching the videos on Inyo pool web site.. My pool has never been cleaner and with less $$$$ out of my pocket. Great motor...
Was this review helpful to you?
1 0
(5 out of 5 stars) Great motor and controls easy to use.
Reviewed By: Inyo Customer ()
Great motor and controls easy to use.
Was this review helpful to you?
(5 out of 5 stars) Did not realize what I was missing
Reviewed By: Inyo Customer ()
Great pump and super quiet. Major difference from my old pump in both water flow and noise.
Was this review helpful to you?
(5 out of 5 stars) Easy to Install and Perfect
Reviewed By: Inyo Customer ()
Easy to install and perfect and improved replacements for old motor ..
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Much quieter and efficient. Also stays very cool to the touch compared to my induction motor. It is very easy to program.
Was this review helpful to you?
(4 out of 5 stars) Replacement Pump Motor
Reviewed By: Paul In Sac from Sacramento, CA ()
Pros: Easy to install and operate
Cons: More noise than original
Easy to install replacement motor worked instantly. Controls are straight forward and programming simple. A bit more noisy than original but the multiple speeds let me fine tune the pump.
Was this review helpful to you?
1 0
(5 out of 5 stars) very quiet motor
Reviewed By: John B. from missouri ()
Pros: quiet, easy to install
Cons: none yet
I needed a new motor for my Hayward super pump and found this motor to save me money in operating costs. It was easy to install and is fully programmable, so far I really like this pump motor.
Was this review helpful to you?
(4 out of 5 stars) Variable speed drive
Reviewed By: Tonya M. ()
We love this is was worth the money we figure it will pay for it's self in one season!
Was this review helpful to you?
10 2
(5 out of 5 stars) Great Pump Motor
Reviewed By: Walt F. from Plano, TX ()
Pros: Quiet, easy to install and operate
Cons: None
Product arrived a day earlier than expected. Packaging was great. You do need to know how to pull the old motor off but there is instruction available (not part of the instructions, only wiring is in the instructions). This was a straight forward change out with my old motor. I did remove the old wall mounted timer and freeze protection switches that were bad and needed to be replaced if I had bought a conventional single speed motor. Having the timer and freeze switch built in was originally what sent me in this direction. Once I flipped the switch, I was amazed at how quiet it runs. Most of the noise at the higher RPMs comes from the fan moving air on the back of the unit. The pump is just outside of my bedroom and I have to strain to hear it even when the house is silent. The programming is easy as well. It is not the same as the more expensive models but is very functional and easy to program. After it ran for a couple of days with the standard setup, I adjusted the speeds and timing for each of the 3 steps and it is doing great. I have noticed a big drop in filter tank pressure which I hope will extend the life of the cartridges. When the temperature nears freezing the pump turns on as it is supposed to. I am waiting to see what savings I have over the single speed motor.
Was this review helpful to you?
2 0
(5 out of 5 stars) Variable speed pump
Reviewed By: Jimbo from Cape Coral Florida ()
Pros: Easy installation, low cost, saves money
Cons: none
Easy to install pump, used the INYO guides from website, took me just one hour and no problems. This pump will pay for itself in less than one year in electricity savavings as well as improve the efficiency of my filter and solar heater.
Was this review helpful to you?
3 0
(5 out of 5 stars) 1.65 Variable speed pool pump motor
Reviewed By: Robert P. from Austin, TX ()
Pros: Energy Savings, Quiet Running, easy programming
Delivery was very fast at no charge for freight. Installation was easy. I am able to run my pump at 3100 RPM rather than 3600 and still maintain required flows. I can now run my pump longer or take the energy savings. The pump is also much quieter than the when I used the standard 1.5 HP Pump.
Was this review helpful to you?