I'm trying to install a Pentair Intellibrite 5G on an old Anthony Model NO. 21 niche. Will this work for that?
Reply
Hi, The Anthony model niche is really old and is not standard. Can't confirm if the Pentair Intellibrite will fit, you can try using this adapter ring but it's a long shot. You can try reaching out to Pentair to confirm.
Reply
I have an older pool with a sta rite pool light in it the niche is really small compared to standard. Depth wish and everything a Pentair will fit the niche will this ring make this work? What size niche will this fit into?
Reply
Hi, Michael. Unfortunately, this ring is not compatible with any of the Sta-Rite Niches or fixtures.
Reply
Good morning
I just installed a Jandy Pro Series Watercolor Led light in my pool. Unfortunately, it doesn't fit in the old niche flush. It is sticking out at the bottom about 3/4". I also have an all tile pool.
Can your product fix this problem?
Reply
Hi, Mario. This can work with the Jandy Pro Series Watercolor light.
Reply
I have an old Lanco type K-5 niche (see photos). Will this adapter work with this niche for upgrading to the newer lights? If not, do you know of another adapter that might work. Thanks
I have an old Lanco type K-5 niche (see photos). Will this adapter work with this niche for upgrading to the newer lights? If not, do you know of another adapter that might work. Thanks
Will this work for an Anthony Model No. 20 niche? If so, what light can I then use with this adapter?
This ring is too large for this Niche. A Hayward universal color logic would fit in the niche
Reply
So this adapter ring fits into the niche but the problem now is that the new PebbleTec is so thick the tabs of this ring do not go far enough into the niche to anchor it correctly. My next question is can I take an Amerlite light and replace the face ring assembly with my Anthony gasket, lens and face ring? Both canisters are 8-3/8" and it seems like it would fit. Is the depth of the Amerlite different than what the Anthony light is?
Our suggestion would be a Hayward Colorlogic in the original niche without the adapter ring.
Reply
I recently bought a house with a swimming pool. The light is wired, but it is not installed into the niche, it is just lying on the deck. When I tried to install it, it was too small, barely, for the niche.
The light is an American Products Series 7885XX 7845XX 7895XX, 500W 120V, R-40 bulb type. Measured across the lens, the fixture is about 10.5" in diameter.
. . .
[to be continued in subsequent submission]
[Continuation of previous submission]
The niche dimensions are:
outer diameter - 12"
screw-to-screw diameter - 11 1/2"
inner diameter - 9 3/4"
Will the Aladdin 500C Light Adapter Ring that you are selling adapt this light fixture to this niche?
I am particularly concerned about the number of bolt holes in the niche, the adapter, and the light, and their alignment.
Thank you.
Reply
what size light will I need after I install this
Reply
Hi Jim, this adapter ring is designed to be used with the Pentair Amerlite pool light series.
Reply
I have an older diving pool that was just redone and converted from plaster to pebble. The light was replaced with an Intellebrite 5g model 601301. The new light doesn't fit the old niche. We think it's an Anthony niche. Will the Aladdin 500c adapter ring fit my niche and allow me to mount the new light?
Hello Paul, yes this would be the correct adapter to fit your niche with the new light install.
Reply
Thanks for the reply. I already went ahead and ordered the Aladdin adapter and got the light installed. Worked out great!
