What kind of pump is needed if you want to run these jets on a separate system? Are there advantages to doing this? what are they? Do you have the pump? How much is it? Thanks!
Reply
The Deck Jets require 7 Gallons Per Minute (GPM) per jet so if you are going with 4 jets than we would recommend a pump which could output 28 GPM For almost all applications the Hayward 1/2 HP Super pump would be plenty strong enough for the 4 jets. You may view this pump through the following link http://www.inyopools.com/Products/02201115001130.htm The benefits of going with a separate pump would be that you would be able to operate your jets independently from your main filter pump, meaning that the jets will not come on every time the filter pump comes on or you can turn on the jet pump without running your entire pool filter system. Secondly it will cost much less to operate the smaller 1/2 HP pump than it would your larger filter pump and lastly you should get longer life out of your filter pump by going wit
Reply
Can the Jandy Deck Jets be installed with fiberoptics? Also, If we installed all 4 jets, can we turn one or two off and run the other two?
Reply
The Jandy deck jets cannot be installed with fiber optics. You would need to go with one of the Laminar systems which you may view through this link http://www.inyopools.com/lighting_jandy_laminarjets.aspx You would be able to use a diverter valve which would allow you to turn flow on and off to certain jets, you may view our diverter valves here http://www.inyopools.com/valves_jandy.aspx You may also view the installation guide for the deck jets here http://www.inyopools.com/owners_manual/jandy_jets.pdf
Reply
Can the jets be installed above the deck? I have existing PVC outlets in the deck from a failed water shooter through a natural rock. I'd like to place the jet assembly on the existing outlet and surround it with rocks for a similar effect.
Reply
Ed, They can be as long as no one is able to trip over the jets.
Reply
I have a set of four jets. Do you make a smaller in diameter size? When they all are on, they seem to be a bit noisy, so a smaller diameter would allow far less water to splash into the pool, and a higher arc.
Thanks.
Reply
Hi Kent, The Jandy Deck Jets is not available in any other nozzle size.
Reply
What is the minimum height and distance for the jets?
Reply
Hi Jerry, The height of the water flow will determine on the gpm, you can review the Jandy Deckjet Reference Guide.
Reply
WHAT SIZE PIPE DO YOU NEED TO RUN FOR DECK JET!
Reply
Hello, please click here for the installation guide for the Jandy Deck Jets.
Reply
How far from pool should the be installed
Reply
Hi. The distance is based on installer or user preference. You can refer to the Jandy Deckjet Installation Manual for more info.
Reply
