Part # 25830-704-800
Dimensions 4" L x 4" W x 2" D
THIS IS THE GENERIC VERSION OF THE JANDY # 7056 WHICH IS USED ON THE JANDY CHECK VALVES. ALL VERSIONS, BOTH STRAIGHT THRU AND 90 DEGREE INCLUDES #7451 FLAPPER, # 7302 SPRING, # 7304 PIN, # 7236 COVER, AND # 1132 COVER O-RING ONLY THE COVER O-RING IS AVAILABLE AS A SEPERATE PART THE OTHERS ARE ONLY SOLD AS PART OF THIS KIT
My pool has a defective jandy anti siphon valve, but I cannot find a part number on it. It says "check valve" on it, but no part number. Would your part work on this one? The valve was installed in 2001 or 2002
Reply
Hello. If your current Jandy check valve has a clear top, is fastened with 8 screws, then this replacement part will fit the existing check valve body regardless of the install date. To be certain please compare the attached picture of the replacement valve cover assembly to the existing check valve. Swimming Pool Check Valve Cover Assembly w/ Flapper & O-ring - 25830-704-800
Reply
Less than 1 hr
Screwdriver
Purchased a new Cover Assembly w/ Flapper & O-ring - 25830-704-800. Removed the old assembly. Put some o-ring lube on the new o-ring. Tightened each screw lightly in a even zig zag pattern. Then went around again to each screw and firmly tightened in a zig zag pattern.
Less than 1 hr
Screwdriver
Less than 1 hr
Screwdriver
2 0
Shut off pool pump
Knock breaker for pool pump
Use Phillips head screw driver
Removes screws to check valve (8)
Take out check valve
Note water flow direction (usually arrow on check valve)
Feel inside to make sure no obstructions where valve seats
Apply silicone lube on new check valve o ring
Place check valve into open slot (nite water direction flow)
Re install Phillip screws
Tighten in star pattern
Reset pool breaker
Turn on pool pump
Check for leaks
Job completed
Good job!
The Most Helpful Review
1 0
(5 out of 5 stars) Great quality
Reviewed By: SG GolfEdge from Cream Ridge, NJ ()
Pros: Price and performance
Cons: None
Great quality and performance. Fit perfectly. The biggest issue is the spring that corrodes so it seems overkill to have to replace the entire valve. But this part does the Job and it's the most cost effective solution out there.
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars) Fit perfectly and does the job.
Reviewed By: Inyo Customer ()
Fit perfectly and does the job.
Was this review helpful to you?
(5 out of 5 stars) Fixed my leak!
Reviewed By: Mack ()
A little pricey but did the job.
Was this review helpful to you?
(5 out of 5 stars) Check valve
Reviewed By: Dennis Z. from Vero beach fl ()
Worked first time. Easy to install saved costly service call
Was this review helpful to you?
(5 out of 5 stars) Fixed a problem with my spa leaking past this check valve and into the pool, causing the spa to slowly drain
Reviewed By: Bill L from Denver, CO ()
Spa was slowly losing water. It wasn't leaking out anywhere obvious, so I figured it must be leaking into the pool through the check valve. When I disassembled the check valve, I noted some deposits on the flapper and seals. Cleaning improved the situation, but buying this new check valve fixed it.
Was this review helpful to you?
(5 out of 5 stars) Installed in less than 5 minutes!
Reviewed By: Roberto M. from Antioch California ()
Fit perfect, my problem was solved in less than 5 minutes. The clear plastic allows me to see the valve operating.
Was this review helpful to you?
(5 out of 5 stars) COVER
Reviewed By: LEE B. from PHOENIX AZ. ()
Pros: fixs PERFECT
Cons: took a week to get here
Was not sure this would work....but it did very well. save your $$$$$ order this one. Took 5 minutes to replace !!
Was this review helpful to you?