Part # 026100001010
Dimensions 15" L x 8.5" W x 6.5" D
Aqua-Flo by Gecko's Flo-Master CP pumps are designed with a unique, high-performance impeller providing flow rates that exceed all tested competition. Ideal for larger, multi-jetted tubs or similar applications requiring greater output. Each pump is engineered with careful attention to detail and accuracy.
Spa Pump Features:
**Warning - OEM pump manufacturers may change motors and styles without notice. Pumps may be with or without a run capacitor.**.
*Traps are available with thread on fitting for all FMHP and FMPC pumps.
Pump prices include two 1 1/2" compression fittings.
Click here for more Spa Pumps
I have a Morgan Spa with a BN37 2 speed 1 hp motor. I need the motor and pump for this. Will this Aqua Flo Geko Alliance FMCP motor and pump be the replacement for it?
Reply
Hi Bobby, The info you've provided is just for the motor, we will need to confirm the wet end also if you're wanting to match up your existing pump to this FMCP Pump. If the wet end does not matter to you then this pump can be used as a replacement.
Reply
Is this pump pretty quiet and what is the benefit of the upper capacitor to not having one on the system? Using it to replace and old Sta-rite JSAYDL-A on a koi pond. Thanks
Reply
Hi. This pump is quiet. The capacitor allows the pump to operate more efficiently.
Reply
Hi, this pump is listed as a replacement for 03510243-1. However, that pump is a single speed, not a 2SPD as listed here. Can I replace the single speed pump with this one and only hook up the high speed?
Reply
Hi Jenn, Yes the single speed version is no longer available however you can hook it up to the high speed as you indicated. This pump is currently in stock ready to ship however our inventory has been selling very quickly, so the sooner better on ordering =)
Reply
Less than 1 hr
Screwdriver, Wrench Set
Pulling the old pump was no problem. After examination, I noticed that my worn out pump/motor had the capacitor inside the electric motor on the end. The new motor and pump fit perfectly EXCEPT that the capacitor was much larger which is a good thing. The bad was that it would not fit into my control panel as it was about 1/8 inch too tall. I carefully took the capacitor cover off to see that there was enough space inside the metal capacitor shroud to take the capacitor out and take a ball pean hammer and tap the edge on the housing enough to make it fit. The capacitor slid back in no problem and I am a happy camper. A few careful minutes with a hammer sure beat sending the pump and motor back. Now I can barely hear the motor run and life is good!
The Most Recent Reviews
(5 out of 5 stars) Spa Replacement Pump & Motor
Reviewed By: George C. from Homosassa, FL ()
Pros: Price, Delivery, Tech Service
Cons: Motor dimensions were not exact replacement for the old unit, but it fit in the space available
This pump was purchased to replace a 10+ year old unit no longer manufactured, based on the recommendation of the INYO tech rep. The new motor was slightly larger (longer in length by an inch and having an externally mounted capacitor) and was a tight fit. It is also more energy efficient, runs quietly, and is working well so far. INYO had the best price and delivered in 2 days.
Was this review helpful to you?
(3 out of 5 stars)
Reviewed By: Nik. ()
Pros: 2speed
Cons: Indoor use only
We own a version of this pool pump already, but sadly when we ordered this one we found it was not able to be used with our outdoor pool so it had to be returned.
Was this review helpful to you?
(5 out of 5 stars) Wonderful Customer Service
Reviewed By: BIOYAS from Arizona ()
The pump I bought will be good. I didn't need it at the time, I was planning ahead. The Customer Service I received, I believe from Sharon, was exceptional. She found a suitable substitute and it arrived in five days. She kept me informed throughout the entire process.
Was this review helpful to you?