Part # 4628-13A
Manufacturer Code 39251509K
Diverter Repair Kit DV 6/7 - 39251509K
Can just the spider gasket be purchased for the Jacuzzi mfm 24 filter?
Reply
Unfortunately the Spider Gasket cannot be purchased by itself for the Jacuzzi mfm 24 sand filter. The least expensive way to purchase the spider gasket is by purchasing the diverter with the spider gasket glued onto the diverter listed here.
Reply
Do you know what part I need to replace if water is always leaking out of my waste port?
Reply
If you are leaking out of the drain port while on filter, the gasket on the key assembly (key #13) may be to blame. You can take a look at a breakdown of the valve here.
Reply
Will this work for a Jacuzzi Laser 192?
Reply
Clint, The Diverter Repair Kit DV6/7 (39251509RKIT) will work on the original DV6 and DV7 multiport valve that is used on the Jacuzzi Laser 192 Sand Filter.
Reply
Less than 1 hr
Screwdriver, Pliers, Punch
2 0
Purchased the repair kit for my diverter on pool filter. removed pin holding handle. removed 6 screws holding diverted together. made note of the position of the parts inside. removed them cleaned up the housing. placed the new parts in place closed the diverted back together. replaced the 6 screws tightly with an alternate pattern until they were all tight. placed the handle in place. replaced the holding pin and moved the handle to divergent positions.
Less than 1 hr
Screwdriver, Wrench Set, hammer and drift punch...
3 0
Easy repair.....I bought the replacement kit and used 2 bar clamps to compress the spring until I could drive the pin out of the handle. Simply replace the parts and use the clamps again to drive the pin back in. Take note of the alignment of the handle and the shaft and new gasket piece. Whole thing took about 10 minutes.
Less than 1 hr
Screwdriver, Adjustable Wrench
4 0
Removed 6 bolts at the top of where the dial is on my Jacuzzi sand filter. Removed the old diverter, popped in the repair kit replacement and done! No more junk in the pool! I have been dealing with this for two years. Had a pool maintenance/installer come out to look at all my equipment (16 years old) and said I needed a new filter...for $800! But he messed up and showed me what was probably the cause.... the diverter gasket was shot..... so I looked it up through INYO pools and fixed it literally in 10 minutes.
Less than 1 hr
Screwdriver, Pliers, Socket Set
5 1
First remove the 6 screws with nuts, with the assembly off, remove the handle by pulling out the pin. Remember in whitch position you remove the diverter, in my set up the big gap was at six with the handle in test mode. Use a plies to down the spring and put the handle pin. Then assemble it to the filter head.
The Most Helpful Review
6 0
(5 out of 5 stars) Great source for original parts
Reviewed By: Tony from Pace, FL ()
Pros: OEM parts, order with ease, fast delivery
Cons: None
The local pool supply company tried to sell me a whole new filter because they didn't carry replacement parts for the brand of filter I have. Instead of spending around $800, all I needed was the diverter repair kit for less than $75! Exact replacement parts - works GREAT!
Was this review helpful to you?
The Most Recent Reviews
2 0
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
This was an acceptable handle to replace my broken one.
Was this review helpful to you?
4 0
(5 out of 5 stars) 7 port valve renewed
Reviewed By: Inyo Customer ()
Excellent kit to renew your valve. I was noticing water by passing the filter and going out the return when I was draining or vacuuming to waste. I waited until the start of pool season and found the Inyo Pools kit. Easy repair. The DIY videos they post were a big help. Especially the tip on how to compress the handle spring (sit on a chair and use your feet!).. While I had it all apart I renewed my sand filter media and now its like a brand new filter.
Was this review helpful to you?
2 0
(4 out of 5 stars)
Reviewed By: Inyo Customer ()
works well but no instructions .
Was this review helpful to you?
2 0
(4 out of 5 stars)
Reviewed By: Inyo Customer ()
This rebuilt kit was very easy to change and Inyo reps were great to work with and helpful
Was this review helpful to you?
2 0
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
easy to rebuild thanks
Was this review helpful to you?
4 0
(5 out of 5 stars) easy fix money saver
Reviewed By: sigzag from Niles,Il. ()
When I went to turn the filter from "FILTER " to "BACKWASH" and the handle broke loose--I thought this will be costly and a lot of work in changing the complete head. Not so--went to INYOPOOLS.COM and they had exactly what I needed. Easy to find on there web site with photos of the parts. Received the parts installed it in about half hour. Great experience.
Was this review helpful to you?
3 0
(5 out of 5 stars)
Reviewed By: Dennis S. from Panama City, FL ()
Fit perfect..easy installation.
Was this review helpful to you?