$41.40

Qty:

By Jandy


Details

Top

Part # 5020-116

Manufacturer Code R0446500

Alternate Part #'s R0446500, 35-295-1132, JNDR0446500, TLD-101-2022

Product Description

Diffuser/Impeller Hardware Kit for Zodiac Jandy SHP/PHPF/JEP Pumps - R0446500

Kit Includes:

  • (1) Impeller Mounting Screw with O-ring
  • (2) Diffuser Mounting Screws
  • (2) Diffuser Mounting Washers
  • (2) Diffuser O-rings

Disclaimer:

All manufacturers’ names, brand names, trademarks, images, symbols, descriptions, and part numbers are used herein for reference purposes only.

Top

?     Asked on 9/20/2015by Ted

I just need the two screws that fasten the diffuser to the back plate? Can these not just be purchased at a local hardware store? Not sure the size but my ex pool service company guy obviously forgot to re-install them.
 Reply

A  Answered on 9/25/2015 by InyoPools Product Specialist Lennox H.

Hi Ted, Hardware are proprietary to the Jandy pumps and is sold as part of this kit.
 Reply


?     Asked on 5/17/2021by Kevin

Is this kit made up of 2) diffuser o-rings, 1) impeller screw & 2) diffuser screws & washers
 Reply

A  Answered on 5/17/2021 by InyoPools Product Specialist Patrick P.

Hi Kevin, This kit includes (1) Impeller Mounting Screw with O-ring (2) Diffuser Mounting Screws (2) Diffuser Mounting Washers (2) Diffuser O-rings
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Pliers, Socket Set, Wrench Set

Replace O'ring from diffuser Jandy Plus PHPM1.5

Written on 6/10/2020 by Guest

1. Shut down Electricity to the motor.
2. Disconnect the 3 electrical wires from the back of the motor.
3. Remove the (8), 9/16 bolts connecting motor unit & wet unitr, remove seal.
5. Separate the motor unit & impeller by carefully inserting a screwdrivers around the edge of the seal plate. slow and carefully wiggle back the motor unit.
Make sure you have the (2) O’rings on the diffuser.
6. Reinstall the new power unit by sliding left to right into the wet unit.
7. Reinstall the (8) bolts.
8. Reconnect the electrical wires.
9. Remove the basket cover from the pump and put 2 gallon or more water into to pump.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Screwdriver, Pliers, Socket Set, Wrench Set

Pump motor was shot and needed to be replaced

Written on 8/28/2019 by Guest

I talked with a rep who helped me find the right replacement motor and parts needed to rebuild my pump. Pulled the old motor off and followed the instructions included with the replacement parts. It was relatively straight forward.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

Bad gasket replaced

Written on 8/14/2019 by Guest

Easy installation, remove the old gasket, and replaced it with a new one. Problem solved.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.8  out of 5 stars)
10 Rating
5 star:
 
(9)
4 star:
 
(0)
3 star:
 
(1)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews