Part # PL2670
Pureline Generic Super Pump™ Style Replacement Seal Plate
This is an aftermarket generic Replacement Seal Plate compatible with the Hayward® Super Pump™ 2600 Series which fits Hayward® Super Pumps™ manufactured 1984 to present. This item is by Pureline and not the Hayward original seal plate.
This seal plate is compatible with Super Pumps™ .33HP - 1.5 HP both full rate and up rate and for 2HP up rate. The SPX1611E5 seal plate would be for the 2 HP full rate and 2.5 HP up rate models. This is the seal plate only and does not include any other parts or accessories.
Disclaimer:
All manufacturers’ names, brand names, trademarks, images, symbols, descriptions, and part numbers are used herein for reference purposes only.
Their is water dripping between motor and plastic connection.
Reply
how do you remove the seal plate from the pump motor? I have a pump that is seized and want to remove the plate to see if I can manually turn the pump. However, I am unable to remove the plate from the Hayward motor.
Reply
See our guide on "How To Replace the Motor on Your Pool Pump". It shows you step by step how to replace a Hayward motor including how to remove the seal plate.
Reply
Does this include the impeller?
Reply
The SPX1600SKIT1 Hayward Super Pump Seal Plate Kit does not include the impeller. The impeller must be purchased separately and matched with the motor's Horsepower output.
Reply
are these pumps like car water pump when the seal goes bad does the water leak out the little hole in the bottom of the pump and if so how do you get the pump off in order to change the back seal
Reply
Vinny, Yes these pumps are similar. What model pump do you have? The process to change the shaft seal can vary depending on the pump model.
Reply
do you have a seal plate kit for saltwater. Description of the plate kit does no indicate seal is for saltwater.I need the motor mount, the seal mount plate, the seal for salt water, and the gaskets. If I order the salt tune up kit, and the seal plate kit, I end up with two seals, one fro salt, one not.
Reply
Hi Glenn, Unfortunately, we do not have a seal plate kit for saltwater. The seal that is in the kit can be used on salt pools but just won't last as long as the heavy duty seal included in the Tune Up Kit.
Reply
4 to 8 hrs
Screwdriver, Pliers, Socket Set, Wrench Set
I ordered new motor and seal plate and other parts and watched several of Inyo's how to video's and replaced all of the parts along with the motor. It was quite easy!
The Most Helpful Review
2 0
(5 out of 5 stars) perfect replacement part
Reviewed By: Shane M. from Orange Park, FL ()
Pros: perfect parts match
Cons: redundent seals with tune up kit
I wish this part was offered without the seal, since most folks that need this part are likely going to buy a tune up kit also, giving them 2 sets of seals when only 1 set is needed.
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Fits works
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Worked as expected
Was this review helpful to you?
1 0
(5 out of 5 stars) Great replacement
Reviewed By: Inyo Customer ()
Perfect fit to my Hayward SuperPump. Very economical upgrade of my unit that failed after motor overheat
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Perfect fit for my super pump
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Just what I needed to rebuild my system
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Good quality. Fit perfect
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Great replacement good quality
Was this review helpful to you?