By Hayward Pool Products
Part # 2807-09
Manufacturer Code GLX-CTL-RITE
AQUARITE CONTROL ONLY
I replaced the main printed circuit board that I had replaced last year . The T Cell I had replaced 2 years ago it is not producing any chlorine and the only light that is one is the power light .Could it be the transformer. Any ideas of what to do.
Reply
David, I don't this its the transformer because the power light is on. Gave Hayward Tech Support a call at (908) 355-7995 for further assistance, I'm not sure on what is causing the problem.
Reply
The power light is the only light on my AquaRite, what is the issue?
Reply
When the power light is the only thing lit up on your AquaRite this indicates that the AquaRite PCB Board is bad. We have a good guide with video which shows How to Replace and AquaRite PC Board.
Reply
I have a 65,000 liter pool and I am looking for an AquaRite style salt chlorine generator, what do you suggest.
Reply
For a 65,000 liter pool which is roughly 18,000 gallons I would suggest the Crystal Pure Salt Chlorine Generator here.
Reply
My system is not producing chlorine and the only light indicator is the generation for only a few seconds after turning the power switch on.
Reply
Hi Nelson, It sounds like you will need to replace the Aqua Rite Main PCB (GLX-PCB-RITE), if you're planning on replacing it yourself you can watch our How to Replace and AquaRite PC Board guide.
Reply
My pool water salt content was just tested at 3000 ppm yet the high salt LED is still on and the unit is not chlorinating. What could be the problem?
Reply
