Part # 4600-1157
Manufacturer Code E-3-S1
Dimensions 2" x 1-1/8"
Valve handle washer used in various top and side mount filter valves including Pentair / Praher, Sta-Rite, Jacuzzi, Waterway and Jandy.
the handle on my multiport valve has no resistance when i push it down to turn it. is this washer what the handle uses as a fulcrum to lift up the diverter inside?
Reply
There is a spring below the cover Spring, Praher ABS 1-1/2" and 2" Top/Side Mount Valves 27-253-1042 Missing broken spring would make it no have resistance to the motion of pushing down handle.
Reply
Less than 1 hr
Screwdriver, Adjustable Wrench, Hammer, punch
I removed the screws at the top of the spider valve to separate the top from the body. Next, I put the valve in a midway position and punched out the pin holding the handle onto the shaft. With the handle removed, I took the opportunity to grease the o-rings on the shaft while I had everything taken apart. From there, it was just removing the old washer, putting the new one on, and putting it back opposite how it was taken apart. The opening in the plate points in the direction of the setting. It’s good to have someone to get the pin started while the other person holds the plate down since it’s spring loaded.
Less than 1 hr
Screwdriver, Hammer and punch
1 0
Removed the screws on the top of the multi-function valve.
Pried the top loose with a straight blade screwdriver.
Took the top to my work bench where I had a vise available to hold the top tightly.
Had to use a punch to punch out the pin holding the handle to the valve.
Handle came off, removed pieces of the old washer and placed new washer on the stem.
Placed handle on the stem and tapped the pin back into place.
Be sure to pay attention that the handle goes back on in the exact same position that you took it off.
Placed the multi-function valve back on sand filter and tightened it down with the screws.
The Most Helpful Review
1 0
(5 out of 5 stars) This order was "handled" perfectly
Reviewed By: Debbi B. from paramus, NJ ()
Pros: If you need to call they are polite and knowledgeable
Cons: None
Even though my pool filter is old, they had all the parts and were delivered quickly and efficiently.
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars) Works perfectly
Reviewed By: Inyo Customer ()
Washer fits perfectly on my Pentair TM-12A valve, improves ease of handle movement…
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Used these to replace old valve. Worked great!
Was this review helpful to you?
(5 out of 5 stars) Perfect
Reviewed By: Inyo Customer ()
Nice quality
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: George T. from Rutherfordton NC ()
exactly as expected and needed
Was this review helpful to you?