$117.28
By Waterway
Part # 4742-01
Manufacturer Code WVS002
Dimensions 12" L x 9" W x 7.5" D
Top MPV, Clamp Style, Pre-2001 - WVS2002
**Note: Collar Assembly - 505-2070B not included.**
sandcommingout of jet
Reply
The easy first. If you just changed the sand, the finer sand may be getting through the filter initially. Vacuum that off of the floor to waste. Check the level of sand in your filter tank. You need to have at least 6" between the top of the tank and the top of the sand. If that is good, check your filter's laterals and standpipe. One or more of them may be cracked and letting sand into your system. See our guide on " How To Replace a Lateral in a Pool Sand Filter".
Reply
My valve is good my valve housing is cracked will have to replace the whole valve I haven't seen just the housing
Reply
Hello,You can just replace the housing. What would be the model number on the valve?
Reply
I ordered wvs002 should have ordered wvs003 will it fit on my tank if I buy two part clamp
Reply
Hi. The new style and old style are not interchangeable. It's more than just the clamp style is different.
Reply
